Products

HDK® H21 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H21 is used as a thickening and thixotropic agent in various applications such as composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

ELASTOSIL® SOLAR 1109 White is a solvent-free and non-corrosive, one-part silicone adhesive that does not slump. Upon exposure to air moisture, ELASTOSIL® SOLAR 1109 White cures at room temperature, resulting in a permanently flexible silicone rubber with excellent mechanical properties. When fully cured, it exhibits long-term stability against weathering, moisture, and UV radiation. This silicone elastomer can withstand continuously changing climatic conditions, UV radiation, and temperatures as high as 180 °C (356 °F) without sustaining any damage.

HDK® H17 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H17 is used as a thickening and thixotropic agent in composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

HELISOL® XA is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 20 mm²/s. Its chemical structure gives it a remarkable set of properties that distinguish it from organic materials like mineral oils. This clear, odorless, and colorless liquid exhibits an outstanding property profile.

ELASTOSIL® SOLAR 1101 is a one-part, non-slump silicone adhesive that is solvent-free and non-corrosive. Upon exposure to air moisture, the adhesive cures at room temperature to produce a permanently flexible silicone rubber possessing exceptional mechanical properties. Fully cured ELASTOSIL® SOLAR 1101 exhibits exceptional long-term stability against weathering, moisture, and UV radiation, while being able to withstand constant exposure to ever-changing climatic conditions, UV radiation, and temperatures as high as 180°C (356°F) without damage.

SILFOAM® SE 39 is a low-viscosity antifoam emulsion known for its long-lasting efficiency. It is especially well-suited for surfactant-rich formulations like liquid detergents and textile auxiliaries. SILFOAM® SE 39 is particularly effective in applications where high surfactant concentrations or intense product movement would quickly render conventional antifoam emulsions ineffective.

HELISOL® XLP is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 35 mm²/s. Its unique chemical structure gives HELISOL® XLP exceptional properties that distinguish it from organic materials like mineral oils. This clear, odorless, and colorless liquid exhibits an outstanding property profile.

POWERSIL® Fluid TR 50 is a fully synthetic silicone fluid that is nonvolatile and noncorrosive. It possesses a high fire point and exhibits virtually self-extinguishing behavior, significantly reducing the fire hazard compared to conventional transformer fluids. This fluid demonstrates exceptional thermal stability, even in the presence of air, enabling higher thermal utilization when compared to other liquid coolants.

HDK® N20 is a synthetic, hydrophilic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. This white colloidal powder offers high purity and serves multiple purposes. One of the primary applications of HDK® N20 is as a thickening and thixotropic agent in organic systems such as unsaturated polyesters, coatings, printing inks, adhesives, and cosmetics. Additionally, it functions as a reinforcing filler in elastomers, particularly silicone elastomers.

SILFOAM® SE 1060 is a versatile antifoam emulsion with a high concentration of emulsifier. It offers excellent resistance to alkalis and acids, making it suitable for various applications where pH is a critical factor. Its wide range of uses makes it a highly adaptable solution.

ELASTOSIL® RT 607 A/B is a pourable, addition-curing RTV-2 silicone rubber with a two-part formulation and a 9:1 mixing ratio. It has low viscosity and offers rapid heat cure. The cured rubber exhibits high hardness and excellent heat stability. Additionally, it is flame retardant, making it suitable for general purpose encapsulation. This product can also be used as a potting material for electrical coils of lifting magnets and for slot exit potting of electrical coils.

ELASTOSIL® SOLAR 1109 Black is a one-part, non-slump silicone adhesive that does not contain solvents and is non-corrosive. Upon exposure to air moisture, it cures at room temperature, forming a permanently flexible silicone rubber with excellent mechanical properties. The fully cured ELASTOSIL® SOLAR 1109 Black demonstrates exceptional long-term stability against weathering, moisture, and UV radiation. This silicone elastomer can withstand continuously changing climatic conditions, UV radiation, and temperatures as high as 180 °C (356 °F) without experiencing any damage.

ELASTOSIL® E43 Black is a self-leveling, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties and has good adhesion properties to many substrates. In particular used as adhesive on cured silicone rubber.

ELASTOSIL® SOLAR 1200 is a non-slump, condensation-curing RTV-2 silicone adhesive designed for the solar industry. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® SOLAR 1200 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can endure constantly changing climatic conditions, UV radiation, and temperatures as high as 180°C (356°F) without damage.

HDK® H18 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H18 is used as a thickening and thixotropic agent in composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

PULPSIL® 238 C is a highly viscous silicone antifoam compound, specifically formulated for use in pulp mills. It is resistant to alkaline conditions and does not contain solvents or water. It is known for its excellent handling, good long-term efficiency, and very good knock-down efficiency.

PULPSIL® 733 E is a low-viscosity, highly effective silicone antifoam emulsion specifically designed for use in pulp mills. It serves as both an antifoam agent and a drainage aid, and can be added at different stages of the manufacturing process. PULPSIL® 733 E is primarily used in pulp washing and screening processes, but it is also effective in bleaching and wastewater treatment.

PULPSIL® 822 E is a medium-viscous, highly effective silicone antifoam emulsion developed specifically for use in pulp mills. It is characterized by its very good knock-down efficiency, long-term efficiency, compatibility, and excellent stability. PULPSIL® 822 E acts primarily as an antifoam agent and drainage aid and can be added at various stages during the manufacturing process.

PULPSIL® 763 E is a low-viscosity, highly effective silicone antifoam emulsion specifically designed for use in pulp mills. It is mainly used in pulp washing and screening processes, but it is also effective during bleaching and wastewater treatment. PULPSIL® 763 E acts primarily as an antifoam agent and drainage aid, and it can be added at various stages of the manufacturing process.

PULPSIL® 255 C is a highly viscous, solvent-free, and water-free silicone antifoam compound specifically designed for use in pulp mills. It offers excellent efficiency in controlling foam. To achieve high efficiency, it is important to ensure proper dispersion of PULPSIL® 255 C in the foaming medium. This can be achieved by adding the product in its neat form, particularly when high amounts of surfactants and/or high shear forces are present to facilitate good dispersion.

PULPSIL® 823 E is a medium-viscous, highly effective silicone antifoam emulsion, specifically designed for use in pulp mills. It acts primarily as an antifoam agent and drainage aid and can be added at various stages during the manufacturing process. PULPSIL® 823 E is mainly used in pulp washing and screening processes, as well as bleaching and wastewater treatment. It offers very good knock-down efficiency and long-term efficiency.

PULPSIL® 745 E is a low-viscosity, highly effective silicone antifoam emulsion specifically designed for use in pulp mills. It is characterized by its low viscosity, making it easy to dose, as well as its excellent long-term efficiency and very good knock-down efficiency. PULPSIL® 745 E functions primarily as an antifoam agent and drainage aid, and it can be added at different stages of the manufacturing process.

PULPSIL® 814 E is a medium-viscosity, low-concentrated, highly effective silicone antifoam emulsion, specifically developed for use in pulp mills. It acts primarily as an antifoam agent and drainage aid and can be added at various stages during the manufacturing process. PULPSIL® 814 E is characterized by its excellent long-term efficiency and knock-down efficiency, particularly in aggressive black liquors. It offers high performance even at low dosages.

PULPSIL® 270 C is a highly viscous, relatively alkaline-resistant, extremely efficient, solvent- and water-free silicone antifoam compound, specially developed for use in pulp mills. It is particularly effective when formulated as an emulsion, making it an excellent antifoam agent for various pulp processing steps, including washing, screening, bleaching, and wastewater treatment. The product exhibits thixotropic properties, requiring gentle stirring to reduce viscosity.

PULPSIL® 160 C is a highly viscous silicone antifoam compound, specifically designed for use in pulp mills. It is resistant to alkaline conditions and does not contain solvents or water. PULPSIL® 160 C offers excellent handling, long-term efficiency, and knock-down efficiency.

PULPSIL® 266 C is a highly viscous, relatively alkaline-resistant, extremely efficient, solvent- and water-free silicone antifoam compound, specially developed for use in pulp mills. It offers very good handling, long-term efficiency, and excellent knock-down efficiency. This product is also suitable for applications in antifoams for textile finishing and pulp-related processes.

PULPSIL® 246 C is a highly viscous, solvent-free, and water-free silicone antifoam compound specifically developed for use in pulp mills. It has excellent long-term efficiency and very good knock-down efficiency. The product is thixotropic, requiring weak stirring to reduce its viscosity. It also offers good handling during application. PULPSIL® 246 C is resistant to alkaline conditions and is designed to effectively control foam in pulp mill operations.

ELASTOSIL® RT 628 A/B is a flowable, addition-curing, 2-part silicone rubber designed for potting, encapsulation, and casting applications. This product vulcanizes at room temperature or under heat, resulting in a permanently flexible silicone rubber featuring excellent mechanical properties. Once cured, ELASTOSIL® RT 628 A/B exhibits exceptional long-term stability against weathering, moisture, and UV radiation. The silicone elastomer can withstand constant exposure to ever-changing climatic conditions, UV radiation, and temperatures as high as 180°C (356°F) without sustaining damage.

NEXIPAL® is a versatile EAP (Electroactive Polymer) laminate designed for actuators and capacitive sensors. It is composed of one or multiple ultrathin silicone layers, known as ELASTOSIL® Film, which have a thickness ranging from 20 to 400 µm. These silicone layers are coated with specialized electrodes, laminated together, and then precisely cut into the desired shape. Multiple layers can be stacked on top of each other to achieve the desired performance.

HELISOL® 5A is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 5 mm²/s. Its unique chemical structure gives it exceptional properties that differentiate it from organic materials like mineral oils. HELISOL® 5A is a clear, odorless, and colorless liquid.

HELISOL® 10A is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 10 mm²/s. Its unique chemical structure sets it apart from organic materials like mineral oils, giving it exceptional properties. HELISOL® 10A is a clear, odorless, and colorless liquid.

ELASTOSIL® RT 622 A/B is a pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It is a flowable material and requires a two-component mixing process for curing. This product is specifically designed for applications in electronics encapsulation and hydroelectric power plants.

SILFOAM® SE 55A is a silicone defoamer emulsion with a medium viscosity, containing 40% active ingredients. It is specifically formulated to control foam in aqueous systems. SILFOAM® SE 55A utilizes Wacker's advanced silicone defoamer technology, making it suitable for use in alkaline and high-temperature applications. This product exhibits excellent foam knockdown properties and provides significant antifoam effectiveness over time.

SILFOAM® SE 47 is a versatile antifoam emulsion with a relatively high emulsifier content. It has shown great effectiveness in addressing foam-related challenges in various applications, including textile auxiliaries and processes like dyeing. Additionally, it is suitable for use in surfactant formulations, cooling lubricants based on mineral oils, and for separating monomers from dispersions and converting dispersions into derivatives.