Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Industrial Additives Functions
- Technologies
Features & Benefits
- Labeling Claims
- Industrial Additives Features
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Industrial Additives End Use
- Use Level
- 0.08 - 0.8 kg/t pulp
- Applications
- Antifoams for Textile Finishing
- Pulp Solutions
- Application Details
- In general we recommend to stir the emulsion before use (approx. 3 minutes with a propeller stirrer at 200 - 400 rpm). But be cautious: too high shear can break the emulsion. The emulsion should be added undiluted, as it is already sufficiently dispersed by its emulsion form.
- If a pre-dilution still should be necessary, we recommend dilutions with cold water in proportions of 3 parts emulsion : 1 part of water to max. 1 part emulsion : 1 part of water. Sufficient quality of this pre-dilution should be checked by previous trials in laboratory scale.
- For manufacture of the pre-dilution add first the emulsion and then add the water under weak stirring. The ready-made dilution has to be agitated 2 to 3 times a day for 15 to 20 min by weak stirring and should be processed within few days.
- PULPSIL® 763 E acts primarily as an antifoam agent and drainage aid and may be added at various stages during the manufacturing process.
- PULPSIL® 763 E is mainly applied to pulp - washing and screening processes, but is also effective during bleaching and in waste water treatment.
Properties
- Physical Form
- Diluent
- Water
- Typical Properties
- Properties
- Low viscosity (easily dosable)
- Very good long-term efficiency
- Very good knock-down efficiency
Value | Units | Test Method / Conditions | |
Density (at 20°C, 1013 hPa) | approx. 1 | g/cm³ | DIN 51757 |
Dynamic Viscosity (at 25°C) | approx. 400 | mPa·s | Brookfield |
pH (at 25°C) | approx. (5 - 6) | — | Indicator strips |
Solid Content | approx. 35 | % | Microwave oven |
Type of Emulsion | Oil in water (Non ionic) | — | — |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage Information
- Store in a dry and cool place.
- Minimum temperature allowed during storage and transportation: 0 °C
- Maximum temperature allowed during storage and transportation: 40 °C