Products

SILFAR® 1000 is a polydimethylsiloxane produced through the hydrolysis and polycondensation of dichlorodimethylsilane and chlorotrimethylsilane. Its degree of polymerization (n) is adjusted to achieve a mean kinematic viscosity of 1000 mm²/s at 25°C. This versatile product finds application in both the pharmaceutical and food sectors. In the pharmaceutical industry, it is commonly used in antiflatulence and antacid preparations.

VINNAPAS® EF 104 is a vinyl acetate-ethylene copolymer (VAE) dispersion stabilized with surfactants. It has a glass transition temperature (Tg) of 14 °C and is designed as a high-performance and cost-effective binder for paperboard and specialty paper coating applications. This polymer dispersion offers a good rheology response when formulated at high coating solids. It also provides excellent dry pick and good to excellent wet pick performance.

LIOSIL® TS 80 E is a specially developed macroemulsion of a functional silicone fluid designed as a softener for the tissue industry. It provides an excellent soft touch along with very good hydrophilicity. This product can be easily diluted with water and exhibits high substantivity on cellulose fibers.

SILFAR® 350 is a polydimethylsiloxane derived from the hydrolysis and polycondensation of dichlorodimethylsilane and chlorotrimethylsilane. Its degree of polymerization (n) is adjusted to achieve a mean kinematic viscosity of 350 mm²/s at 25°C. This versatile product finds application in both the pharmaceutical and food sectors. In the pharmaceutical industry, it is commonly used in antiflatulence and antacid preparations.

WACKER® L 057 is a 100% water-dispersible, hydrolytically stable polyether-functional polydimethylsiloxane. WACKER® L 057 can be used in a wide range of applications, such as the textile industry, polishes, cleaners, and the plastics industry. WACKER® L 057 exhibits both special lubricant properties and antistatic action.

VINNAPAS® 401 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol and has a glass transition temperature (Tg) of -15 °C. It is specifically formulated to provide easy clean-up, extended open time, and exceptional film flexibility. VINNAPAS® 401 is commonly used as a base for adhesives, offering a well-rounded combination of excellent wet tack, fast setting, strong adhesion, and heat resistance.

SILFAR® SE 88 is a silicone antifoam emulsion suitable for various industries such as food, pharmaceuticals, fermentation processes, and agrochemical formulations. It is specifically designed for European use as a processing aid in food production, based on E 900. It is important for the food manufacturer to ensure that only minimal traces of the product are present in the final food, as per the necessary regulations.

PULPSIL® 955 S is a hydrolytically stable silicone surfactant that is water-dispersible and consists of a polyethermodified silicone fluid. It has been specifically designed for use in the pulp and paper industry. This product significantly improves the efficiency of paper deaerators, enhances the drainage and deaeration processes in pulp production, and acts as a booster for pulp defoamers beyond their cloud point.

HDK® T40 is a standard synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity commonly used in various industrial applications. HDK® T40 finds applications in flexographic printing, gravure printing, industrial wood coatings, inkjet paper, offset printing, and printing inks.

LIOSIL® TS 40 E is a microemulsion of a functional silicone fluid specifically developed as a softener for the tissue industry. It offers excellent softness and a very good hydrophilic nature. The product is easily diluted with water and exhibits high substantivity on cellulose fibers. It is a microemulsion.

CRA® 17 is a highly efficient controlled-release additive designed specifically for adjusting the release force of solvent-free DEHESIVE® systems. It offers exceptional performance in achieving the highest release values among all CRA® modifiers. Its key features include high efficiency, rapid curing, and stable release characteristics.

HDK® V15 is a standard synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity commonly used in various industrial applications. HDK® V15 finds its application as a thickening and thixotropic agent in silicone sealants. Additionally, it is used as a reinforcing filler in elastomers, particularly silicone elastomers.

SILFOAM® SE 2660 SIMETH.EM is a medium- to high-viscosity antifoam emulsion that finds application in various industries. This silicone fluid emulsion, based on E 900, is exclusively permitted for use as a processing aid in food applications. It is crucial for food producers to ensure that only technically unavoidable traces of SILFOAM® SE 2660 SIMETH.EM are present in the final food product.

VINNAPAS® EF 101 is an aqueous dispersion of a vinyl acetate-ethylene copolymer stabilized with surfactants. It has a glass transition temperature (Tg) of 0°C and was specifically developed as a pigment binder for paper, paperboard, and specialty coated papers. This product offers a good rheology response at high coating solids and is manufactured without the use of alkylphenol ethoxylate (APEO) surfactants or defoamers.

SILFAR® E 1049 is a silicone fluid emulsion specifically formulated for a wide range of applications, including those in the food and pharmaceutical industries. It is composed of components that meet the necessary standards outlined in the relevant EP and USP monographs. SILFAR® E 1049 can be utilized as an excipient in pharmaceutical products, although it cannot be used as an active pharmaceutical ingredient.

CRA® EM 460 is a highly efficient controlled-release additive specifically developed for adjusting the release force of silicone emulsion-based DEHESIVE® systems. It is used in conjunction with coating polymers like DEHESIVE® EM 427 or DEHESIVE® EM 428 to create release coatings. The resulting system is designed for pressure-sensitive adhesive release applications and is compatible with papers of different porosities and films. The cure is achieved through a vinyl addition chemistry mechanism.

HDK® H13L is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H13L is primarily used as a thickening, thixotropic, and anti-sedimentation agent in various applications such as coatings, printing inks, adhesives, and others. It finds its main application in polar systems. The strong hydrophobicity of HDK® H13L makes it particularly suitable for solvent-free systems, high solids formulations, and waterborne coatings.

CRA® 51 AMA® is a highly efficient controlled release additive designed to adjust the release force in solventless DEHESIVE® systems. It offers exceptional performance in terms of high efficiency, ensures rapid curing, exhibits stable release characteristics, and includes anti-misting properties.

SILFAR® SE 4 is a silicone antifoam emulsion that finds its use in the food and pharmaceutical sectors, as well as in fermentation processes and agrochemical formulations. It serves as an effective antifoam agent in various stages, including fermentation and downstream processes like active ingredient extraction and solvent recovery, where compliance with USP and EP standards is necessary.

CRA® 45 AMA® is an exceptionally efficient controlled release additive specifically formulated for adjusting the release force in solvent-free DEHESIVE® systems. It offers high release levels, extremely stable release, and low levels of silicone mist at high coating speeds. CRA® 45 AMA® also demonstrates good bulk bath life, allowing for extended usability, as well as excellent thin-film bath life.

SILFAR® S 184 is a 100% silicone antifoam agent specially designed for the pharmaceutical and food processing industries. It fully adheres to the specifications outlined in the "Simeticone (EP)" and "Simethicone (USP)" monographs. Produced under cGMP guidelines, SILFAR® S 184 is suitable for use as an active pharmaceutical ingredient (API), particularly in antiflatulence and antacid preparations.

HDK® S13 is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® S13 is a white colloidal powder of high purity. It finds application in inkjet paper and pulp, paper & printing processes.

HDK® H17 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H17 is used as a thickening and thixotropic agent in composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

SILFAR® S 188 is a 100% silicone antifoam agent that has been specifically formulated for use in the pharmaceutical and food processing industries. It functions by acting as an antifoam agent, effectively preventing or alleviating flatulence in the digestive system. Additionally, it forms a protective lining on various surfaces, such as the gastric mucous membrane, providing additional benefits.

PULPSIL® 763 E is a low-viscosity, highly effective silicone antifoam emulsion specifically designed for use in pulp mills. It is mainly used in pulp washing and screening processes, but it is also effective during bleaching and wastewater treatment. PULPSIL® 763 E acts primarily as an antifoam agent and drainage aid, and it can be added at various stages of the manufacturing process.

PULPSIL® 844 E is a highly concentrated, medium-viscous, and highly effective silicone antifoam emulsion, specially developed for use in pulp mills. It is known for its excellent long-term efficiency, very good knock-down efficiency, and impressive drainage performance. PULPSIL® 844 E is primarily used in pulp-washing and screening processes, and it is also effective during bleaching and wastewater treatment.

PULPSIL® 266 C is a highly viscous, relatively alkaline-resistant, extremely efficient, solvent- and water-free silicone antifoam compound, specially developed for use in pulp mills. It offers very good handling, long-term efficiency, and excellent knock-down efficiency. This product is also suitable for applications in antifoams for textile finishing and pulp-related processes.

PULPSIL® 270 C is a highly viscous, relatively alkaline-resistant, extremely efficient, solvent- and water-free silicone antifoam compound, specially developed for use in pulp mills. It is particularly effective when formulated as an emulsion, making it an excellent antifoam agent for various pulp processing steps, including washing, screening, bleaching, and wastewater treatment. The product exhibits thixotropic properties, requiring gentle stirring to reduce viscosity.

PULPSIL® 960 S is a hydrolytically stable silicone surfactant based on a polyether-modified silicone fluid, designed specifically for use in the pulp and paper industry. This product is water-dispersible, allowing for easy incorporation into water-based systems. To achieve optimal dispersion, we suggest starting with water and gradually adding PULPSIL® 960 S while stirring continuously.

PULPSIL® 959 S is an aqueous solution of a hydrolytically stable polyether-modified silicone fluid. It offers several key characteristics, including improved cleaning properties compared to conventional mechanical cleaning methods, increased processing speed, low surface tension, good wetting properties, easy processing, and excellent solubility in water.

PULPSIL® 850 E is a highly concentrated, medium-viscous, and highly effective silicone antifoam emulsion, specifically designed for use in pulp mills. It is known for its excellent long-term efficiency and very good knock-down efficiency. The product boasts a high concentration of active material, ensuring superior performance. Additionally, PULPSIL® 850 E is universally applicable to different types of black liquor.

PULPSIL® 246 C is a highly viscous, solvent-free, and water-free silicone antifoam compound specifically developed for use in pulp mills. It has excellent long-term efficiency and very good knock-down efficiency. The product is thixotropic, requiring weak stirring to reduce its viscosity. It also offers good handling during application. PULPSIL® 246 C is resistant to alkaline conditions and is designed to effectively control foam in pulp mill operations.

PULPSIL® 968 S is a hydrolytically stable silicone surfactant based on a water-dispersible polyether-modified silicone fluid. It was specifically developed for use in the pulp and paper industry. PULPSIL® 968 S offers the advantage of enhancing the efficiency of paper deaerators when used at a dosage range of 1.0% to 10.0% relative to the solid material of the deaerator.

PULPSIL® 255 C is a highly viscous, solvent-free, and water-free silicone antifoam compound specifically designed for use in pulp mills. It offers excellent efficiency in controlling foam. To achieve high efficiency, it is important to ensure proper dispersion of PULPSIL® 255 C in the foaming medium. This can be achieved by adding the product in its neat form, particularly when high amounts of surfactants and/or high shear forces are present to facilitate good dispersion.

PULPSIL® 238 C is a highly viscous silicone antifoam compound, specifically formulated for use in pulp mills. It is resistant to alkaline conditions and does not contain solvents or water. It is known for its excellent handling, good long-term efficiency, and very good knock-down efficiency.

PULPSIL® 733 E is a low-viscosity, highly effective silicone antifoam emulsion specifically designed for use in pulp mills. It serves as both an antifoam agent and a drainage aid, and can be added at different stages of the manufacturing process. PULPSIL® 733 E is primarily used in pulp washing and screening processes, but it is also effective in bleaching and wastewater treatment.