Products

ELASTOSIL® N 2199 is a one-part, ready-to-use, acid- and solvent-free, non-corrosive RTV-1 non-slumping paste that cures at room temperature to a permanently flexible silicone rubber on exposure to atmospheric moisture. It shows excellent adhesion to a broad variety of substrates.

DEHESIVE® 908 is a solventless, addition-curing silicone fluid designed for release applications on both paper and filmic substrates. It is an essential component of a multicomponent release coating used in the manufacturing of paper and filmic release liners. These liners play a crucial role in the production of single- and double-sided industrial laminates.

ELASTOSIL® R Plus 4806/20 MH is a high-temperature vulcanizing (HTV) silicone rubber grade. It is a one-component compound that undergoes platinum-curing and is used for manufacturing molded articles. These vulcanizates generate a thin oil film with lubricating properties shortly after the curing process. Since the crosslinking system relies on platinum cure, there are no peroxide decomposition products produced during curing.

SILFAR® E 1049 is a silicone fluid emulsion specifically formulated for a wide range of applications, including those in the food and pharmaceutical industries. It is composed of components that meet the necessary standards outlined in the relevant EP and USP monographs. SILFAR® E 1049 can be utilized as an excipient in pharmaceutical products, although it cannot be used as an active pharmaceutical ingredient.

ELASTOSIL® LR 3003/80 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® LR 3675/30 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3675 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. In comparison with ELASTOSIL® LR 3070 grades, the coefficient of friction is reduced by 50-70%. The vulcanizates are noted for their excellent mechanical and electrical properties. Due to the low compression set, there is no need to post-cure finished parts.

ELASTOSIL® LR 3671/30 A/B is a self-adhesive liquid silicone rubber from the ELASTOSIL® 3671 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time and good mechanical and electrical properties. The vulcanizates of this product are known for their self-adhesive properties to various substrates as well as their low coefficient of friction.

ELASTOSIL® E70 is a flowable, one-component, acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent primerless adhesion to many substrates and outstanding heat stability even in long-term exposure. It is a high-temperature-resistant grade for sealing and bonding applications under high thermal stress.

VINNAPAS® AN 2014 is a fine-particle-size aqueous dispersion of a self-crosslinking copolymer of vinyl acetate and an acrylic ester. VINNAPAS® AN 2014 forms a particularly hard and tough elastic film. It is especially suited as a binder for glass fiber fabrics and has excellent adhesion to mineral substrates.

ELASTOSIL® LR 6360 F is a solvent-free, free-flowing silicone rubber designed for stiff textile coatings. It undergoes additional curing and is particularly suitable for applications that require strong adhesion. This product exhibits high additive tolerance, resulting in only a moderate increase in viscosity when mixed with adhesion promoters. As a result, ELASTOSIL® LR 6360 F is well-suited for textile coatings that have demanding adhesion requirements.

ELASTOSIL® LR 3093/65 A/B is a paste-like, two-component compound of liquid silicone rubber with short curing times. The vulcanizates are noted for good mechanical properties and excellent heat resistance within a temperature range of -55°C to +225°C, and for a short time up to 300°C. Outstanding ultra-low compression sets can be achieved after post-curing for 4 hours at 210°C.

WACKER® CS - Construction Seal is a one-component, neutral-curing silicone sealant specifically designed for construction, glass, and window building applications. This low modulus sealant offers outstanding adhesion, a long shelf life, and excellent tooling characteristics. WACKER® CS - Construction Seal cures at room temperature when exposed to atmospheric moisture, resulting in a permanently flexible silicone rubber.

ELASTOSIL® E43 Black is a self-leveling, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties and has good adhesion properties to many substrates. In particular used as adhesive on cured silicone rubber.

WACKER® L 057 is a 100% water-dispersible, hydrolytically stable polyether-functional polydimethylsiloxane. WACKER® L 057 can be used in a wide range of applications, such as the textile industry, polishes, cleaners, and the plastics industry. WACKER® L 057 exhibits both special lubricant properties and antistatic action.

ELASTOSIL® N189 Black is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. It exhibits excellent primerless adhesion to many substrates and has good resistance to mineral oil and coolants. Additionally, it shows excellent heat stability.

ELASTOSIL® LR 3005/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® RT 778 is a non-slump, condensation-curing RTV-2 silicone adhesive. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 778 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures up to 250°C (482°F) without damage.

ELASTOSIL® LR 3040/30 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3040 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Especially noted for their high tear resistance according to DIN ISO 34-1 A (Trousers) and ASTM D 624 B (crescent),

ELASTOSIL® R 401/30 OH US is a colorless, translucent silicone rubber base noted for its flexibility, high transparency, and good mechanical properties. Its vulcanizing characteristics make it possible to achieve rubber moldings by compression, transfer, and injection molding. Post-cured vulcanizates can be used for applications in the health care and food handling industries.

ELASTOSIL® Vario 40 is a pourable, two-component silicone rubber that vulcanizes at room temperature through addition-curing. It can be blended with ELASTOSIL® VARIO 15 to achieve a desired hardness ranging between 15 and 40 Shore A. This versatile silicone rubber is used in applications such as prototype molding and reproduction molding.

ELASTOSIL® RD 6620 F is a solvent-based addition-curing silicone rubber dispersion specifically designed for textile coatings, particularly as a topcoat. It provides a matt finish and exhibits properties such as reduced coefficient of friction and high abrasion stability. It is commonly used in architectural textiles.

ELASTOSIL® E41 Transparent is a flowable, one-component silicone rubber with excellent mechanical properties that cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties and has good adhesion properties to many substrates, in particular cured silicone rubber.

ELASTOSIL® LR 3003/03 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® M 4503 is a pourable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature. It possesses several key features, including good flow and high resistance to casting resins, particularly polyesters. The main application of ELASTOSIL® M 4503 is in making cost-effective molds, particularly well-suited for PE resins.

WACKER® 465 - Fire Retardant is a high-quality silicone sealant specifically designed for various applications such as construction, glass and window building, and industrial use. This one-component, neutral-curing sealant possesses exceptional adhesion, impressive fire-retardant properties, and a long shelf life. It offers excellent tooling characteristics, allowing for easy application. When exposed to atmospheric moisture at room temperature, WACKER® 465 - Fire Retardant undergoes curing and transforms into a permanently flexible silicone rubber.

WACKER® 50550/8 VP is a waxy, alkyl-modified polysiloxane known for its hydrolysis resistance and strong affinity to different substrates. Primarily utilized in the polish sector, this product is particularly recommended for car polishes and paint conditioners. Its high substantivity ensures that the treated paint surface remains highly resistant to detergents and weathering over extended periods of time, providing long-lasting protection.

ELASTOSIL® R Plus 4846/30 MH is a high-temperature vulcanizing (HTV) silicone rubber grade. It is a one-component compound that undergoes platinum-curing and is utilized in the production of molded articles. The vulcanizates generated from this compound develop a thin oil film with lubricating properties soon after the curing process. Since the crosslinking system relies on platinum cure, there are no peroxide decomposition products formed during the curing process.

ELASTOSIL® NT 76 is a solvent-free, addition-curing liquid silicone rubber (LSR) with a non-thixotropic viscosity. It is a general-purpose silicone rubber for textile coating applications, like the manufacturing of conveyor belts, electrical sleevings, protective clothing, bellow expansion joints, awnings, sunblinds, sports performance fabrics, airbags, and medical fabrics.

ELASTOSIL® LR 3003/05 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily  pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

SILFOAM® SE 2660 SIMETH.EM is a medium- to high-viscosity antifoam emulsion that finds application in various industries. This silicone fluid emulsion, based on E 900, is exclusively permitted for use as a processing aid in food applications. It is crucial for food producers to ensure that only technically unavoidable traces of SILFOAM® SE 2660 SIMETH.EM are present in the final food product.

ELASTOSIL® SOLAR 1200 is a non-slump, condensation-curing RTV-2 silicone adhesive designed for the solar industry. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® SOLAR 1200 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can endure constantly changing climatic conditions, UV radiation, and temperatures as high as 180°C (356°F) without damage.

WACKER® Elastomer 350 N is a colorless liquid polymer of hydroxyfunctional polydimethylsiloxane. It is a versatile product designed for various applications such as sealants, adhesives, coatings, textile softeners, and mold-making products. This polymer is insoluble in water and offers fast curing. It also provides good release stability and demonstrates excellent anchorage to a wide range of substrates.

ELASTOSIL® N9111 White is a non-slump, non-corossive, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. It is a multipurpose sealant and adhesive for the appliance, automotive, and electronics industries. Due to its shear-thinning nature, ELASTOSIL® N9111 White is easy to apply. The material starts curing upon contact with air humidity.

ELASTOSIL® LR 3005/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® LR 3070/50 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3070 series. This product is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Its vulcanizates are noted for excellent mechanical and electrical properties.

ELASTOSIL® N291 is a free-flowing, ready-to-use silicone rubber that can be vulcanized at room temperature or at high temperatures when exposed to atmospheric moisture. It is specifically designed for printing sealing patterns on various substrates, such as steel or cylinder head gaskets containing or free of sulfur. This can be achieved using silk-screen printing techniques.