Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Markets
- Application Method
- Compatible Substrates & Surfaces
- Applications
Textile Printing
- Application Details
General
- VINNAPAS® AN 2014 can be applied by spray, bath impregnation or foaming.
- VINNAPAS® AN 2014 crosslinks at temperatures above 130°C, but 150°C is required for optimum durability. After drying and curing at temperatures above 150°C the polymer forms a tack-free, strong and tough film, with excellent water and alkali resistance. The pH-value of VINNAPAS® AN 2014 is usually sufficient for optimum crosslinking but in exceptional cases the addition of 0.1–0.5 % diammonium phosphate can accelerate the process.
Polymer Dispersions
- VINNAPAS AN 2014 is miscible with most anionic and/or nonionic aqueous polymer dispersion.
- VINNAPAS® EN 1092 is recommended as a blending component to soften handfeel notably in glassfiber scrims. However, the compatibility of the mixture should always be tested by undertaking a storage test.
Fillers and Pigments
If, for coating applications, VINNAPAS® AN 2014 is to be pigmented, only pH neutral fillers and pigments should be used since they would otherwise interfere with the crosslinking process which takes place in the acid pH range. Defoaming Agents Suitable defoaming agents are, for example,
- SILFOAM® SE1662, SLE or SRE
- FOAMASTER® types MO 2134 and MO 2135
- Agitan 352.
Their efficacy and compatibility in the formulation chosen should always be checked.
- SILFOAM® is a trademark of Wacker Chemie AG
- FOAMASTER® is a trademark of BASF SE
- AGITAN® is a trademark of MÜNZING Chemie GmbH
Thickening Agents
Thickeners which are pH neutral products e.g. cellulose derivatives, polyvinyl alcohol or polyurethane based are especially recommended. VINNAPAS® AN 2014 crosslinks under acidic conditions so that if an alkali thickenable acrylic acid copolymer is to be employed, the pH should be adjusted with ammonia.
Properties
- Physical Form
- Typical Properties
- Specifications
- Properties
- VINNAPAS® AN 2014 forms a particularly hard and tough elastic film.
- It is especially suited as binder for glass fiber fabrics and has excellent adhesion to mineral substrates.
| Value | Units | Test Method / Conditions | |
| Appearance of the Dispersion Film | Clear glossy | — | Visual |
| Density (at 23°C) | 1.09 | g/cm³ | DIN EN ISO 2811-3 |
| Elongation (at break) | approx. 600 | % | DIN EN ISO 527, part 1 - 3 |
| Glass Transition Temperature | approx. 30 | °C | DSC, Specific Method |
| Minimum Film Forming Temperature | approx. 13 | °C | DIN ISO 2115 |
| Predominant Particle Size | approx. (0.2 - 0.3) | µm | Specific method |
| Protective Colloid (Emulsifier System) | Anionic emulsifiers | — | — |
| Surface of the Dispersion Film | Tack free | — | — |
| Tensile Strength (Cross Linked) | approx. 18.0 | N/mm² | DIN EN ISO 527, part 1 - 3 |
| Value | Units | Test Method / Conditions | |
| Dynamic Viscosity (at 23°C) | 100 - 400 | mPa·s | DIN EN ISO 2555 |
| pH | 4.5 - 5.5 | — | DIN/ISO 976 |
| Solids Content | 49 - 51 | % | EN ISO 3251 |
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 6 Months
- Storage Information
- When the dispersion is stored in tanks, proper storage conditions must be maintained. The product has a shelf life of 6 months starting from the date of receipt if stored in the original, unopened containers at temperatures between 5 and 30°C.
- Iron or galvanized iron containers and equipment are not recommended. Corrosion could result in discoloration of the dispersion or blends made from it in further processing. We therefore recommend the use of containers and equipment made of ceramic, rubberized or enameled materials, appropriately finished stainless steel, or plastic (rigid PVC, polyethylene or polyester resin). As polymer dispersions may tend to superficial film formation, skins or lumps may be formed during storage or transportation. A filtration process is thus recommended prior to utilization of the product.
Preservation for Transport, Storage and further Processing
- The product is adequately preserved during transportation and storage if kept in the original, unopened containers. However, if it is transferred to storage tanks, the dispersion should be protected against microbial attack by adding a suitable preservative package.
- Measures should also be taken to ensure cleanliness of the tanks and pipes. In unstirred tanks, a layer of preservativecontaining water should be sprayed onto the surface of the dispersion to prevent the formation of unwanted skin and possible attack by microorganisms. The thickness of this water layer should be < 5 mm for low viscosity dispersions and up to 10–20 mm for high viscosity products. Proper procedures periodic tank cleaning and sanitization must be set up in order to prevent microbial attack. Contact your biocide representative/supplier for further plant hygiene recommendations. Measures should be taken to ensure that only clean air enters the tank when the dispersion is removed.
- Finished products manufactured from polymer dispersions usually also require preservation. The type and scope of preservation will depend on the raw materials used and the anticipated sources of contamination. The compatibility with other components and the efficacy of the preservative should always be tested in the respective formulation.
- Preservative manufacturers will be able to advise you about the type and dosage of preservative required.