Products

ELASTOSIL® 5000 is a one-component, acid-curing, low-modulus silicone sealant with outstanding adhesion, a long shelf life, and very good processing properties for construction and industrial applications. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

ELASTOSIL® Color Paste FL Signal Violet RAL 4008 C is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® A 2000 is a one-component, thixotropic sealant intended for gasketing and sealing applications where resistance to long-life lubricants (such as hypoid gear lubricant) under harsh conditions is required. It adheres to most substrates without priming and is resistant to hot lubricating oils.

DEHESIVE® 915 is a solvent-free, addition-curing silicone fluid specifically developed to provide paper and filmic substrates with a release layer. Formulated with additional components, this versatile product offers exceptionally fast curing properties, enabling the use of formulations with low platinum concentrations.

ELASTOSIL® AUX G 3246 is a solvent-based mixture of siloxanes and reactive silanes used as adhesion promoters for silicone rubbers. It is used to pretreat metallic, ceramic, glass, or other polymeric substrate surfaces to enable excellent adhesion towards subsequently vulcanized ELASTOSIL® R solid silicone elastomers (HCR/HTV, peroxide curing).

ELASTOSIL® eco 7000 N is a one-component, neutral-curing, low-modulus silicone sealant with outstanding adhesion and a long shelf life for construction, glazing, and window applications, as well as industrial applications. ELASTOSIL® eco 7000 N is produced based on a 100% exchange of fossil-based raw materials for sustainably certified renewable materials. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

ELASTOSIL® Color Paste FL Yellow RAL 1006 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

HDK® V15 is a standard synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity commonly used in various industrial applications. HDK® V15 finds its application as a thickening and thixotropic agent in silicone sealants. Additionally, it is used as a reinforcing filler in elastomers, particularly silicone elastomers.

ELASTOSIL® 7750 N is a one-component, neutral-curing, low-modulus silicone sealant with outstanding adhesion, a long shelf life, and excellent tooling characteristics for construction, glass, and window building, as well as industrial applications. ELASTOSIL® 7750 N cures at room temperature in the presence of atmospheric moisture to give a permanently flexible silicone rubber.

ELASTOSIL® SUB C 2000 A/B is a two-component silicone rubber specifically developed for deep-sea applications. It is a pourable material that undergoes addition curing. This silicone rubber exhibits flexibility at both low temperatures (-40 °C) and high temperatures (+180 °C). It has a low viscosity, making it ideal for the manufacturing of various thermal insulating devices.

ELASTOSIL® Color Paste PT Red Brown RAL 3013 is a ready-to-use compound comprising specific color pigments and a reactive silicone polymer, which is commonly used in ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without interference of the physical properties (e.g. hardness) and without migration as observed with silicone oil.

BELSIL® SPG 128 VP is available as a 20% active solution in cyclopentasiloxane. The solution includes a silicone polyglucoside, which is a nonionic surfactant with an HLB (hydrophilic-lipophilic balance) value of approximately 6-7. This silicone polymer is produced using a renewable, sugar-based component. Silicone polyglucosides are recognized for their mild and gentle properties as surface-active silicone surfactants. However, they are not typically used as primary surfactants since they do not generate significant foam independently.

ELASTOSIL® Color Paste FL Red Violet RAL 4002 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® Color Paste PT Violet RAL 4001 is a ready-to-use compound comprising specific color pigments and a reactive silicone polymer, which is commonly used in ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without interference of the physical properties (e.g. hardness) and without migration as observed with silicone oil.

ELASTOSIL® Color Paste FL May Green RAL 6017 K1 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

Wacker Chemie (Chloromethyl)trimethylsilane (CMM3) is a clear, mobile, colorless liquid with a pungent odor. It serves as a building block for pharmaceutical ingredients and pesticides, and it finds applications in the chemical industry. The lead time for production is based on campaign production. Furthermore, it involves backward integration with silane, CMM2, and MeCl.

ELASTOSIL® Color Paste FL Pine Green RAL 6028 C is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used in ELASTOSIL® liquid silicone rubber. This ensures a homogeneous covulcanization of the color paste without impairment of the physical properties (e.g. hardness) and without migration as it may be observed for systems based on silicone oil.

SEMICOSIL® 2M2M is a high-purity dimethoxydimethylsilane with low levels of metal, chloride, and methanol content. It was developed specifically for the semiconductor industry, serving as a precursor for low-dielectric-constant interlayer dielectrics. This product is commonly used in chemical vapor deposition (CVD) and spin-on dielectric (SOD) applications.

ELASTOSIL® E14 Red is a non-sag acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent primerless adhesion to many substrates and outstanding heat stability even in long-term exposure. It meets the physical requirements of MIL-A-46106, Group I, Type I, and Group III, Type I.

WACKER® Plasticizer 100 is a colorless, clear, and odorless liquid with a density of approximately 0.96 g/cm³ at 25°C. It is not soluble in water. This product is commonly used in silicone sealants. WACKER® Plasticizer 100 serves as a raw material for the production of RTV-1-silicone rubbers.

ELASTOSIL® R Plus 5305/70 is a platinum-catalyzed, addition-curing, two-part silicone rubber specifically designed for the manufacturing of extruded articles. Cured articles exhibit excellent transparency and very good mechanical properties. This silicone rubber is suitable for applications such as ignition and battery cables, utilizing addition curing and two-component systems.

ELASTOSIL® eco 4100 is a one-component, acid-curing, low-modulus silicone sealant with outstanding adhesion and a long shelf life for construction, glazing, and window applications, as well as sanitary applications. ELASTOSIL® eco 4100 is produced based on a 100% exchange of fossil-based raw materials for sustainably certified renewable materials. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

ELASTOSIL® AUX Mould Release Agent 32 is a mold release agent for LSR (liquid silicone rubber) and HTV (high-temperature vulcanizing) injection and compression molding. This product functions as an auxiliary that helps improve the demolding of tools for injection and compression molding.

POWERSIL® 310 MH is a one-component, ready-to-use peroxide curing compound. It cures to form an electrically insulating silicone elastomer with high erosion resistance. This product exhibits very good arc resistance, suitable dielectric properties, and good mechanical properties. POWERSIL® 310 MH is specifically recommended for the production of various types of electrical insulating equipment used in outdoor applications, such as composite insulators, arrester housings, bushings, and more.

SILFOAM® SH is an anhydrous antifoam compound used in various industrial applications. It was specifically developed for different technical applications, including the biotechnological industry. SILFOAM® SH serves as an effective degassing aid to reduce foam formation during the production and processing of paints. Additionally, it is a reliable degassing aid for PVC pastes and casting resins.

DEHESIVE® PSA 850 R is a solvent-based silicone pressure-sensitive adhesive intended for coating films but also other substrates. It can be used for coating several film  substrates, such as polyester, polyamide, polyimide, and others, for the manufacture of different silicone pressure-sensitive adhesive tapes and other articles.

WACKER® AK 0,65 is a hexamethyldisiloxane. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits good dielectric properties, low surface tension, high surface activity, and is chemically highly unreactive. Additionally, it has a low solidifying point.

SILFAR® 100 is a polydimethylsiloxane derived from the hydrolysis and polycondensation of dichlorodimethylsilane and chlorotrimethylsilane. Its degree of polymerization (n) is adjusted to achieve a mean kinematic viscosity of 100 mm²/s at 25°C. This product finds primary application in the pharmaceutical sector, particularly as a fundamental raw material in pharmaceutical formulations.

SILRES® BS 17 is a solventless concentrate that is based on silanes and siloxanes. It is specifically used in water-diluted form for the hydrophobation (waterproofing) of silicate-based mineral construction materials that are produced in plants. One of the key advantages of SILRES® BS 17 is that it is a water-free and solventless silicone concentrate. It can be easily diluted with drinking water without the need for sophisticated mixing devices. This allows for convenient and efficient dilution, making the application process simpler for users.

ELASTOSIL® Color Paste FL Dark Blue RAL 5010 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

WACKER® AP 500 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. It is commonly used as a heat transfer fluid and a pressure transfer fluid. Additionally, it serves as a dielectric in capacitors and transformers as well as a base fluid in heat-resistant lubricants. For practical purposes, the useful temperature range of WACKER® AP 500 is between -35 °C and +200 °C.

ELASTOSIL® LR 3005/70 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® Color Paste FL Orange RAL 2004 F is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

WACKER® Anchorage Additive HF 100 is a reactive epoxy-functional silicone polymer that enhances the adhesion of addition-crosslinking DEHESIVE® systems or liquid silicone rubbers (LSR) to polymeric substrates. It improves the anchorage of DEHESIVE® systems on PET films, enabling the production of release liners, as well as the anchorage of LSR on fabric. This additive has a low odor and is non-corrosive.

BELSIL® RG 100 is an elastomer gel composed of an organosiloxane polymer dispersed in cyclopentasiloxane. This semitransparent gel serves as a thickener in formulations, ensuring smooth applications. When subjected to shear stress, BELSIL® RG 100 thins, making it easy to incorporate cosmetic ingredients such as pigments. It is effortless to distribute on the skin and provides a pleasant, non-greasy, silky skin feel. As the volatile silicones evaporate, a non-tacky film is left behind, enhancing the water resistance of formulations.

VINNAPAS® EN 1024 is a self-crosslinking, aqueous polymer dispersion based on the monomers vinyl acetate and ethylene. This product is manufactured without the use of plasticizers. It is specifically designed to serve as a binder for soft and hydrophilic nonwovens. VINNAPAS® EN 1024 offers good wet strength to the nonwovens while maintaining a low level of formaldehyde. Additionally, it is particularly suitable for foam applications.