Products

BELSIL® PF 100 is an aryl- and alkyl-modified silicone fluid of medium viscosity. BELSIL® PF 100 is characterized by having a higher refractive index than standard dimethicone fluids (1.38-1.40). It offers significant improvements in regards to gloss and shine. BELSIL® PF 100 is used in all kinds of cosmetic formulations, but mostly in hair care compositions and color cosmetics due to its shine-enhancing benefits.

HDK® H20 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H20 is used as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics, and other applications. It also serves as a reinforcing filler in elastomers, particularly silicone-elastomers. Additionally, HDK® H20 acts as a free flow additive in the production of powder coatings.

HDK® N20Plus is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® N20Plus is a white colloidal powder of high purity. It finds applications in offset printing and powder coatings.

ELASTOSIL® LR 3040/60 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3040 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. They are particularly noted for their high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent).

LIOSIL eco F 100 is a linear, non-reactive, unmodified polydimethylsiloxane with a viscosity of approximately 100 mm²/s. In its manufacturing process, LIOSIL® eco F 100 replaces 100% of fossil-based raw materials with renewable raw materials (biomethanol) using a REDcert² biomass balance approach audited by TÜV NORD. Thanks to its unique chemical structure, LIOSIL® eco F 100 offers exceptional properties that distinguish it from organic materials like mineral oils. Notably, it exhibits a low surface tension and excellent spreading properties.

ELASTOSIL N199 TRANSPARENT is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. ELASTOSIL® N199 Transparent exhibits excellent primerless adhesion to many substrates with high tear strength. It is a multipurpose adhesive and sealant for the electronics industry, with typical uses for CIPG- and FIPG-applications.

WACKER® Silane M1-Triethoxy is a clear, colorless liquid with an odor characteristic of alcohols. The use of WACKER® Silane M1-Triethoxy to render fillers water repellent considerably improves their dispersibility and reduces their sedimentation tendency. Mineral-filled plastics can thus be processed more easily. Additionally, resistance to moisture and chemicals is much higher.

SILRES® BS 1702 is a solvent-free mixture of silane and siloxane that can be applied either in undiluted form or diluted with organic solvents. It is specifically designed as a high-quality specialty water repellent for impregnating fiber cement. When applied to fiber cement, SILRES® BS 1702 acts as an effective water repellent, helping to protect the material from moisture absorption and potential damage caused by water.

SEMICOSIL® 911 A/B is a pourable, two-part silicone rubber that cures to a soft silicone gel through addition-curing. It has a 1:1 mixing ratio and demonstrates thixotropic behavior. This product offers rapid heat curing and forms a soft gel during vulcanization. SEMICOSIL® 911 A/B has a low volatile and uncured polymer content. It maintains almost constant properties within a wide temperature range, from -40 °C to +180 °C. Additionally, it boasts a low ion content.

ELASTOSIL® R Plus 4370/50 is a two-component high consistency silicone rubber designed for the manufacturing of extruded articles. It utilizes addition curing and possesses self-bonding properties. This product is well suited for the production of two-component combinations using pressure-free extrusion or co-extrusion techniques.

HDK® H21 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H21 is used as a thickening and thixotropic agent in various applications such as composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

ELASTOSIL® LR 3004/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3004 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

Wacker Chemie 1,1,3-Trichloroacetone (1,1,3-TCA) is a colorless to reddish, lachrymatory liquid with a pungent odor. It serves as an intermediate in the production of folic acid. Additionally, it is used as a building block for the synthesis of active pharmaceutical ingredients (APIs), including vitamins. Furthermore, it is utilized as a building block for agrochemical substances and actives.

WACKER® Polymer FD 20 is a colorless, clear, and odorless liquid that is not miscible with water. It is utilized as a raw material for the production of RTV-1 silicone rubbers. This product is specifically used in the compounding of silicone sealants and finds applications in the production of sealants and silicone sealants.

POWERSIL® 460 MH is a ready-to-use electrically conductive silicone rubber grade specifically designed for compression molding. It already incorporates curing agent C1. This material is electrically conductive and is suitable for applications such as stress cones for cable accessories and cold shrink accessories.

ELASTOSIL® 4100 is a one-component, acid-curing, low-modulus silicone sealant with outstanding adhesion and a long shelf life for construction, glazing, and window applications, as well as sanitary applications. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

ELASTOSIL® Color Paste PT Green RAL 6017 is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used to produce ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration, as may be observed for systems based on silicone oil.

HDK® H15 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H15 is commonly utilized as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics, and other applications. Additionally, it serves as a reinforcing filler in elastomers, particularly silicone elastomers. Moreover, HDK® H15 functions as a free flow additive in the production of technical powders.

WACKER® AK 5000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 5000 mm²/s. Its chemical structure gives it exceptional properties that distinguish it from organic materials like mineral oils. WACKER® AK 5000 exhibits minimal changes in physical properties across a broad temperature range, making it highly versatile. It also boasts excellent water-repellent properties and good dielectric properties, further enhancing its performance in various applications.

ELASTOSIL® SOLAR 1200 is a non-slump, condensation-curing RTV-2 silicone adhesive designed for the solar industry. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® SOLAR 1200 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can endure constantly changing climatic conditions, UV radiation, and temperatures as high as 180°C (356°F) without damage.

VINNAPAS® 510 ED is a polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content of the dispersion is below 1000 ppm. VINNAPAS® 510 ED offers several advantages in building chemical applications as well as in general adhesives. To achieve optimum weathering resistance, opaque pigments should be used to ensure adequate pigmentation.

WACKER® AK 200 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 200.000 mm²/s. It is enhanced with a special heat stabilizer that safeguards the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 200 000 STAB is particularly well-suited for applications that entail high temperatures and/or shear stress. It exhibits long-term heat stability, making it suitable for operating temperatures exceeding 150 °C, and it demonstrates high shear stability.

ELASTOSIL® Color Paste FL Black RAL 9011 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® Color Paste PT Green RAL 6032 F is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used to produce ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration, as may be observed for systems based on silicone oil.

VINNOL® H 15/42 is a copolymer consisting of approximately 86 wt.% vinyl chloride (VC) and 14 wt.% vinyl acetate (VAc). Its primary application is as a binder in surface coating compounds and printing inks. This thermoplastic and physically drying binder undergoes film formation as the solvent present in the formulation evaporates.

WACKER® Silicate TES 40 WN is an ethyl silicate polymer. It is a low-viscosity liquid that provides approximately 41% of silicon dioxide (silica) upon complete hydrolysis. WACKER® Silicate TES 40 WN is used for the precipitation of polymeric SiO2 structures (silica) upon complete hydrolysis, with ethanol being produced as a by-product.

ELASTOSIL® LR 3001/55 FR A/B is a paste-like, low-inflammable, two-component compound of liquid silicone rubber. The excellent flame retardancy is confirmed by the achieved UL94-V0 listings at 0.75 mm and 3 mm thickness and f1 rating according to UL746C: Unterwriters Laboratories File E75704 (Wacker Chemie AG). It exhibits good heat resistance, high oil resistance, and short curing times, which are further benefits of this material.

ETONIS® 1400 S is a polymer dispersion designed for soil stabilization purposes. When applied to the soil, this product creates polymer bridges between the soil or aggregate particles and the hydrated cement particles. These bridges contribute to the formation of a flexible and strong network that is both durable and resistant to water.

BELSIL® W 3230 is a blend of dimethicone and stearoxy-modified polydimethylsiloxane. It is a white wax that offers effective protection against aqueous media. In skin care formulations, BELSIL® W 3230 creates a protective barrier, providing moisturizing benefits. It imparts a non-greasy, soft, velvety feel to the skin and exhibits excellent compatibility with a wide range of cosmetic raw materials. In color cosmetic formulations, it enhances gloss and brilliance, contributing to a more lustrous appearance.

ELASTOSIL® R Plus 4360/60 MH is a two-component, high consistency silicone rubber specifically designed for the manufacture of extruded articles. The vulcanizates produced using this silicone rubber exhibit excellent elasticity (rebound resilience) and demonstrate good tear resistance. In comparison to other platinum curing grades like the ELASTOSIL® R plus 4305 series, ELASTOSIL® R Plus 4360/60 MH showcases improved physical resistance.

ELASTOSIL® R Plus 4305/40 is a two-component, high-consistency silicone rubber designed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and good to very good mechanical properties. This fast-curing silicone rubber demonstrates good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.

WACKER® Catalyst 41 is a dibutyl-organotin compound. It is a colorless to yellowish, clear liquid with a faint ethylacetate smell. It is not miscible in water. WACKER® Catalyst 41 is specifically designed for use as a raw material in the production of RTV-1-silicone rubbers.

ELASTOSIL® R 427/30 is a high-strength silicone rubber known for its outstanding transparency, excellent tear strength, and exceptional mechanical properties. It is particularly suitable for the production of extruded profiles. The vulcanizing characteristics of this product allow for short cycle times in the manufacturing of molded articles through compression, transfer, and injection molding processes. Post-cured vulcanizates of this product can be utilized in various applications within the healthcare and food handling industries.

WACKER® AK 30000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 30000 mm²/s. Its chemical structure provides it with exceptional properties that differentiate it from organic materials like mineral oils. Notably, WACKER® AK 30000 exhibits good dielectric properties, making it suitable for applications requiring electrical insulation. Additionally, it has low surface tension, which contributes to its high surface activity.

SEMICOSIL® 920 LT A/B is a pourable, addition-curing, two-part silicone rubber that cures to a soft silicone gel. It has a 1:1 mixing ratio and exhibits very low viscosity, making it easy to handle and process. This product offers fast curing and forms a soft gel during vulcanization. SEMICOSIL® 920 LT A/B maintains almost constant properties within a wide temperature range, from -100 °C to +200 °C. Additionally, it has a low ion content, ensuring high purity in applications.

HDK® N20 P Pharma is a synthetic, hydrophilic, amorphous silica powder produced via flame hydrolysis. It is a white, high-purity colloidal powder. This product serves as a glidant for tableting, effectively improving the flow of powders. Furthermore, HDK® N20 P Pharma undergoes testing according to the EP and USP/NF standards.