Products

ELASTOSIL® P 7676 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits rapid cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.

ELASTOSIL® R 750/50 OH is a high-consistency silicone rubber (HCR) known for its exceptional resistance to high temperatures, oxygen, and dry heat. The vulcanizates produced from this product exhibit excellent performance under extreme conditions. It is specifically designed for applications that require resistance to high temperatures and is suitable for extrusion processes.

ELASTOSIL® P 7684/40 A/B is an addition-curing RTV-2 silicone rubber, curing to a silicone elastomer of low hardness. It exhibits a fast cure at room temperature, which can be considerably accelerated by the application of heat. This product can be used for molding applications in prosthetics.

ELASTOSIL® R 501/75 OH is a peroxide-curing high-consistency silicone rubber (HCR) for the manufacture of flame retardant products. This product is recommended to be used in cable insulations for household, automotive, railway, marine, and aerospace applications where high flame retardancy is required.

ELASTOSIL® M 4370 A/B is a room-temperature-curing silicone rubber (RTV-2) that is pourable and utilizes addition-curing. It consists of two components and vulcanizes at room temperature. The main application of ELASTOSIL® M 4370 A/B is in creating silicone surfaces for printing rollers and making molds for casting low-melting metal alloys. This grade is compliant with FDA and BfR regulations for food contact applications.

ELASTOSIL® P 7684/60 A/B is an addition-curing RTV-2 silicone rubber curing to a silicone elastomer of low hardness. It exhibits a fast cure at room temperature, which can be considerably accelerated by the application of heat. This product can be used for molding applications in prosthetics.

ELASTOSIL® AUX Stabilizer H2 is a ready-to-use silicone rubber additive compound containing a heat-stabilizing filler. Thanks to its paste character, ELASTOSIL® AUX Stabilizer H2 can easily be incorporated into ELASTOSIL® R and R plus mixtures on two-roll mills. It is used to extend the service life of silicone elastomers at temperatures above 170°C.

ELASTOSIL® R 510/60 S is a high-consistency silicone rubber (HCR) that cures with peroxide and is specifically designed for manufacturing silicone-insulated cables and wires. It offers excellent performance within a wide temperature range of -55°C to +225°C. This product finds applications in various areas, including cables for household appliances, ignition and battery cables, as well as measurement and control cables.

ELASTOSIL® R 756/70 OH is a peroxide-cured high-consistency silicone rubber whose vulcanizates possess excellent resistance to hot air, particularly after the addition of a heat stabilizer. The vulcanizates of this product show good tear resistance, a low compression set, and are highly elastic.

ELASTOSIL® P 7683/25 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits a fast cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.

SILRES® H 44 is a powdered, condensation-curing phenyl silicone resin with excellent solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Due to its compatibility with organic resins, SILRES® H 44 can also be used to modify or partly replace phenolic resins in the respective compounds. Compared to other silicone resins, SILRES® H 44 cures relatively quickly at elevated temperatures. It is therefore particularly suitable for fully automated production lines.

ELASTOSIL® R 756/60 OH is a peroxide-cured high-consistency silicone rubber whose vulcanizates possess excellent resistance to hot air, particularly after the addition of a heat stabilizer. The vulcanizates of this product show good tear resistance, a low compression set, and are highly elastic.

ELASTOSIL® R 756/50 OH is a peroxide-cured high-consistency silicone rubber whose vulcanizates possess excellent resistance to hot air, particularly after the addition of a heat stabilizer. The vulcanizates show good tear resistance, a low compression set, and are highly elastic. Postcured parts can be used for food contact applications and are suitable for use under the recommendation "XV. Silicones" of the BfR and FDA 177.2600 under observance of any given limitations on extractable and volatile substances.

ELASTOSIL® P 7600 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits rapid cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.

ELASTOSIL® R 510/70 S is a peroxide-crosslinking, high-consistency silicone rubber (HCR) that is specifically designed for manufacturing silicone-insulated cables and wires. It offers excellent performance within a wide temperature range of -55°C to +225°C. This product finds applications in various areas, including cables for household appliances, ignition and battery cables, as well as measurement and control cables.

SILRES® H60 A/B is a liquid, solvent-free, two-part phenyl silicone resin formulation. The product is a modification of the well-established SILRES® H62 C and is thus ideal for impregnating the electrical coils of motors. Besides, SILRES® H60 A/B can be used to provide hydrophobic properties to porous materials and as a binder for composites made of fibrous fillers, cloths, and woven or non-woven reinforcing materials. Fully cured SILRES® H60 A/B has excellent electrical insulation properties and outstanding long-term heat resistance. Additionally, it shows high stability against weathering, moisture, and UV light and can therefore be continuously exposed to constantly changing climatic conditions or UV radiation.

ELASTOSIL® R 750/40 OH is a high-consistency silicone rubber (HCR) known for its exceptional resistance to high temperatures, oxygen, and dry heat. The vulcanizates produced from this product exhibit excellent performance under extreme conditions. It is specifically designed for applications that require resistance to high temperatures and is suitable for extrusion processes.

ELASTOSIL® AUX Stabilizer H6 is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

SILPURAN® Film 2030 is an exceptionally skin-compatible protective film made from cross-linked silicone rubber, specially developed for the healthcare industry. SILPURAN® Film 2030 shows constant electrical resistance and good comparative tracking resistance across a broad range of temperatures. SILPURAN® Film 2030 offers reliable protection, electrical insulation, and temperature stability, making it a valuable material in the healthcare industry.

ELASTOSIL® R 756/40 OH is a high consistency silicone rubber that undergoes peroxide curing. The resulting vulcanizates exhibit outstanding resistance to hot air, especially when a heat stabilizer is added. These vulcanizates also demonstrate favorable properties such as good tear resistance, low compression set, and high elasticity.

SILRES® MK Flakes is a condensation-curing methyl silicone resin with good solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Besides, SILRES® MK Flakes is the ideal product for making tack-free prepregs with excellent storage stability. Fully cured SILRES® MK Flakes has the lowest carbon content of all WACKER silicone resins and thus yields a very high ash content when pyrolized. Composites made of SILRES® MK Flakes show long-term stability against weathering, moisture, and UV light. They can therefore be continuously exposed to constantly changing climatic conditions, UV radiation, and temperatures significantly higher than 300 °C (572 °F). SILRES® MK Flakes also provides water repellency and excellent electrical insulation properties to the respective composite materials.

ELASTOSIL® AUX Stabilizer H6 F is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

ELASTOSIL® AUX Stabilizer H1 is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

SILRES® MK Powder is a condensation-curing methyl silicone resin with good solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Additionally, SILRES® MK Powder is the ideal product for making tack-free prepregs with excellent storage stability. When fully cured, SILRES MK POWDER has the lowest carbon content among all WACKER silicone resins, resulting in a high ash content when pyrolized. Composites made of SILRES® MK Powder exhibit long-term stability against weathering, moisture, and UV light. They can be continuously exposed to changing climatic conditions, UV radiation, and temperatures exceeding 300 °C (572 °F). Furthermore, SILRES® MK Powder provides water repellency and excellent electrical insulation properties to the composite materials.

ELASTOSIL® R 750/60 OH is a high-consistency silicone rubber (HCR) known for its exceptional resistance to high temperatures, oxygen, and dry heat. The vulcanizates produced from this product exhibit excellent performance under extreme conditions. It is specifically designed for applications that require resistance to high temperatures and is suitable for extrusion processes.

ELASTOSIL® P 7671 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits rapid cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.

Vulcanizates of ELASTOSIL® R 862/60 OH are heat-resistant peroxide-curing silicone rubbers that possess particularly good resistance to hot air in combination with several heat stabilizers. The vulcanizates are highly elastic and show extraordinary low compression. The addition of heat stabilizers at service temperatures of more than 180 °C is recommended.

ELASTOSIL® M 1470 is a kneadable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature. This grade is particularly suitable as an impression material for molding models with only a slightly structured surface or for small models with no or only minor undercuts. The process involves impressing a slab of catalyzed rubber onto the model surface or pressing the model into the surface of the rubber slab. ELASTOSIL® M 1470 produces vulcanizates with high hardness and mechanical strength.

ELASTOSIL® P 7670 A/B is an addition-curing RTV-2 silicone rubber curing to a silicone elastomer of low hardness. This product exhibits rapid cure at room temperature, which can be considerably accelerated by the application of heat. It can specifically be used for flexible molding applications in prosthetics.

ELASTOSIL® Color Paste PT Red Brown RAL 3013 is a ready-to-use compound comprising specific color pigments and a reactive silicone polymer, which is commonly used in ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without interference of the physical properties (e.g. hardness) and without migration as observed with silicone oil.

WACKER® AK 5000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 5000 mm²/s. Its chemical structure gives it exceptional properties that distinguish it from organic materials like mineral oils. WACKER® AK 5000 exhibits minimal changes in physical properties across a broad temperature range, making it highly versatile. It also boasts excellent water-repellent properties and good dielectric properties, further enhancing its performance in various applications.

WACKER® AK 60000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 60000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. This clear, odorless, and colorless liquid exhibits minimal change in physical properties over a broad temperature range. It also demonstrates excellent water-repellent properties and good dielectric properties.

WACKER® AK 500 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 500 mm²/s. Its chemical structure imparts exceptional properties that distinguish it from organic materials like mineral oils. WACKER® AK 500 exhibits excellent dielectric properties, low surface tension resulting in high surface activity, and a high degree of chemical inertness. These characteristics make it well-suited for various applications where these specific properties are required.

ELASTOSIL® R Plus 4350/55 is a two-component high consistency silicone rubber designed for the manufacture of extruded articles. It utilizes an addition-curing system and offers excellent heat stability. This product is suitable for various applications including household applications, where it can be used for addition curing, food-contact, heat resistance, and high rebound resilience.

ELASTOSIL® RT 480 is a spreadable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature. It is commonly used in industrial assembly and reproduction molding applications. This silicone rubber exhibits condensation-curing properties, allowing for fast curing at room temperature. It has a spreadable and self-leveling flow, making it easy to work with. ELASTOSIL® RT 480 is a two-component product that provides reliable results in various applications.

WACKER® AK 20000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 20000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits excellent water-repellent properties, good dielectric properties, and low surface tension, resulting in high surface activity.