Products in Parts & Components

VESTAMID® L1670 is a low-viscosity polyamide 12 compound that has been specifically developed with heat and light stabilization for the extrusion of thin wire insulations and cable jacketings. Coatings made from VESTAMID® L1670 demonstrate a low coefficient of friction, which greatly facilitates the process of laying cables. This compound is well-suited for profile extrusion and wire and cable extrusion processing techniques.

KOSMOS® T 100 is a dimethyl tin-based catalyst used in the production of polyurethane foams, coatings, sealants, elastomers, RIM, and spray applications. It is a liquid organic tin compound known for its exceptional catalytic activity. KOSMOS® T 100 exhibits high selectivity towards the urethane reaction, resulting in shorter gel times and tack-free times.

POLYCAT® SA 102 is a heat-activated catalyst that offers excellent front-end delay, activated at a thermo-activation temperature of approximately 60 °C (140°F). This catalyst is specifically recommended for artificial turf applications. It belongs to the category of blocked amine catalysts, which are known for their ability to provide delayed reaction profiles.

Evonik Polymer VS 200 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

Evonik Polymer VS 1000 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

POLYCAT® SA 8 is a tertiary amine utilized to enhance the urethane reaction either through heat activation or when combined with co-catalysts at ambient temperature. This product finds application in coatings, adhesives, sealants, elastomers, and composites. By using formulations containing POLYCAT® SA 8, it is possible to achieve an extended pot life comparable to that of mercury catalysts.

DABCO® 33 LV is the industry standard tertiary amine catalyst used to promote the gel (polyol-isocyanate) reaction in the production of flexible and rigid foam, as well as CASE applications. It provides strong gel catalysis with high efficiency and serves as a versatile amine catalyst for various foam types.

VESTAKEEP® L 4000 G is a high-viscosity, unreinforced, lubricated polyether ether ketone suitable for injection molding and extrusion. The semicrystalline polymer offers superior thermal and chemical resistance. Parts made from VESTAKEEP® L 4000 G have low flammability and can be processed using standard machines for thermoplastics.

VESTAMID® MLT 4500 is a well-established 5-layer tube designed for automotive fuel handling systems. This system features an outer and inner layer of VESTAMID® polyamide 12, providing excellent performance and durability. The MLT 4500 series also incorporates a barrier layer of ethylene vinyl alcohol (EVOH), offering superior permeation resistance against alcohol-containing fuels. Additionally, it delivers exceptional cold impact performance, ensuring reliable operation even in challenging conditions. In specific regions where antistatic properties are required, the multilayer tubing system (MLT) 4540 is available. Based on the same design, the MLT 4540 includes a conductive VESTAMID® polyamide 12 inner layer to fulfill the antistatic requirements. Experience the reliability and versatility of the MLT 4500 series and MLT 4540 in automotive fuel handling systems, ensuring efficient fuel transport and meeting the specific needs of your applications.

VESTAKEEP® 4000 GF30 is a glass fiber-reinforced (30%) polyether ether ketone specifically designed for injection molding applications. This semi-crystalline polymer offers superior mechanical, thermal, and chemical resistance, ensuring exceptional performance. Parts manufactured from VESTAKEEP® 4000 GF30 exhibit low flammability, enhancing safety. Compatible with common injection molding machines for thermoplastics, this material simplifies the manufacturing process. Experience the reliability and versatility of VESTAKEEP® 4000 GF30 in your injection molding applications. With its glass fiber reinforcement, it provides enhanced strength and rigidity, while maintaining excellent properties in challenging environments. Choose VESTAKEEP® 4000 GF30 for its superior mechanical performance, thermal stability, chemical resistance, and ease of processing, enabling the production of high-quality injection molded parts.

VESTAMID® L1723 BK 9.7624 is a low-viscosity, plasticized PA12 resin suitable for injection molding. It has been developed specifically for the production of strip clips and cable ties. The parts made from this resin maintain their dimensions in environments with varying humidity levels while possessing high tenacity, a low coefficient of friction, and good chemical resistance.

DABCO® T 12 (dibutyltin dilaurate, DBTDL) is a catalyst that enhances the urethane (polyol-isocyanate) reaction in the manufacturing of flexible and rigid polyurethane foams, coatings, adhesives, and sealants. It promotes rapid gel and tack-free times, contributing to improved mechanical properties in molded and slabstock foams.

Evonik Polymer OH 2 is a polydimethyl siloxane with terminal silanol groups, serving as a fundamental component in the formulation of condensation-curing silicone elastomers. This product is offered in a range of viscosity levels, spanning from 100 to 400,000 mPas. In its physical form, it appears clear and colorless. Chemically, it is characterized as hydroxy-terminated polydimethyl siloxanes.

DABCO® DMDEE is an amine blow catalyst specifically designed for single and/or multicomponent polyurethane systems. It is a low-activity catalyst that demonstrates high blow selectivity. This catalyst allows for excellent shelf life in OCF applications and offers good system stability when used with HFO blow agents.

DABCO® T 120 is a potent catalyst used for urethane reactions (gelling), offering excellent hydrolytic stability on the resin side. It is a dibutyl tin-based catalyst that displays high catalytic activity and enhanced hydrolytic stability. This catalyst finds application in spray foam, rigid polyurethanes, and high-resiliency flexible molded products.

VESTAMID® MLT 4540 is an established 5-layer tube used in automotive fuel handling systems. It consists of an outer and inner layer of VESTAMID® polyamide 12 and a barrier layer of ethylene vinyl alcohol (EVOH). The VESTAMID® MLT 4540 offers good permeation resistance against alcohol-containing fuels and excellent cold impact performance.

ALBIFLEX® 297 is a bisphenol-A-epoxy-silicone block copolymer resin that excels in crafting high-performance elastomers. This versatile liquid, responsive to epoxy, seamlessly cures when combined with aliphatic and cycloaliphatic epoxy resin curing agents. ALBIFLEX® 297 accommodates various conventional casting and molding techniques for your manufacturing needs.

ALBIFLEX® 246 is an innovative Bisphenol-A-epoxy silicone block copolymer resin designed for crafting high-performance elastomers. This liquid resin, active with epoxy, seamlessly cures when paired with aliphatic and cycloaliphatic epoxy resin curing agents. ALBIFLEX® 246 offers versatility, supporting various casting and molding methods for your manufacturing needs.

KOSMOS® MB 10 is a strong gel catalyst for polyether-based systems, utilizing a combination of tin and bismuth. It facilitates a robust gelling reaction. It is sensitive to moisture and requires the correct handling during storage and production to maintain high performance.

DABCO® DC 1 is designed to delay the initiation of the reaction while ensuring a robust curing process by enhancing the urethane (polyol-isocyanate) reaction in various flexible molded polyurethane foams, making it particularly suitable for NVH applications. It is a suitable option for applications that demand lower or no emissions from amines.

VESTAMID® NRG 5901 BK is a high-molecular-weight PA-12 material developed by Evonik. This exceptional material offers superior performance characteristics, making it an ideal choice for expanding the use of thermoplastic piping systems. With its ability to handle higher operating pressures and larger diameters, VESTAMID® NRG 5901 BK provides a safe and cost-effective alternative to metallic piping systems. In addition to extending the operating pressure limits of thermoplastic piping systems, it offers numerous benefits and, in many cases, outperforms conventional PE piping systems. Experience the reliability, durability, and enhanced performance of VESTAMID® NRG 5901 BK in your piping applications. Choose VESTAMID® NRG 5901 BK for its superior properties and cost-effective solution, ensuring the safe and efficient operation of your thermoplastic piping systems.

VESTAMID® L1930 BK 9.7503 is a heat-stabilized PA 12 compound reinforced with 30% milled glass fibers. It is suitable for injection molding applications. The reinforcement provides high strength and rigidity to the moldings. Due to the low water absorption of PA 12, parts made from this compound exhibit good dimensional stability and maintain mechanical properties even with changing ambient humidity.

VESTAMID® MLT 7400 is a proven 5-layer tube designed specifically for fuel handling systems in the automotive industry. This innovative system features an outer layer of VESTAMID® polyamide 12, along with two barrier layers: ethylene vinyl alcohol (EVOH) as the middle layer and a fluoropolymer, EFEP NEOFLONTM, as the inner layer. The combination of these materials provides exceptional resistance to alcohol-containing fuels, superior chemical resistance on the inner tube surface, and virtually zero extraction levels. VESTAMID® MLT 7400 delivers reliable performance and durability. It comes in the form of pellets or granules, allowing for easy integration into manufacturing processes. With its excellent thermal stability and resistance to oil and fuels, this tube finds extensive applications in the automotive and mobility sectors.

Evonik Crosslinker 100, part of the Crosslinker 100 series, consists of polydimethylsiloxanes containing SiH groups within the polymer chain. In addition to SiH groups within the chain, the Crosslinker 100 series features terminal SiH groups. These crosslinkers are essential components of polyaddition silicones. When working with two-component silicone formulations, it is crucial to maintain strict separation between Pt catalysts (e.g., Catalyst 500 series) and SiH crosslinkers to ensure proper performance.

DABCO® DC 2 is designed to delay the initiation of the reaction while ensuring a robust curing process by enhancing the urethane (polyol-isocyanate) reaction in flexible molded polyurethane foam and CASE (coatings, adhesives, sealants, and elastomers) applications. Notably, DABCO® DC 2 exhibits stronger catalytic activity compared to DABCO® DC 1.

VESTAMID® eCO LX9039 BBM100 is a unique polyamide 12 product offered by Evonik. It is an unmodified polyamide 12 with medium viscosity and does not contain any stabilizers or processing aids. This specific formulation is typically utilized in special circumstances where the absence of additives is desired or the presence of processing aids could cause interference. The "eCO" in its name reflects Evonik's commitment to reducing CO2 emissions by utilizing renewable or circular feedstocks through a mass-balance approach. VESTAMID® eCO LX9039 BBM100 provides a reliable solution for applications requiring a pure polyamide 12 material without any additional additives, catering to specific requirements in various industries.

VESTAMID® L2124 NC is a plasticized, heat- and light-stabilized polyamide 12 compound specially designed for the extrusion of flexible tubing and hoses, particularly for oil and petrochemical applications. This compound conforms to DIN 73 378, Type: PA 12-PHL, for tubing. VESTAMID® L2124 NC is characterized by its high melt viscosity and excellent dimensional control during pipe extrusion. Compounds based on PA12 demonstrate minimal variation in properties with changing humidity due to their low moisture absorption. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. Choose VESTAMID® L2124 NC for its reliable performance, versatility, and exceptional properties, ensuring the durability and reliability of your flexible tubing and hose applications.

TEGOSIL® Heatban 200 is a heat stabilizer for cured silicone elastomers, especially high-consistency rubber (HCR). Like TEGOSIL® Heatban 110, this product offers protection against thermal degradation up to 300°C. It is compatible with various peroxide- and platinum-cured rubber materials commonly used in industrial and consumer applications. Its pasty viscosity simplifies incorporation into HCR formulations.

Evonik Polymer VS 500 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

Evonik Polymer VS 100 comprises vinyl-terminated polydimethyl siloxanes available in various viscosity levels and molecular weights, featuring an impressively low content of volatile constituents. These polymers serve as essential base components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents, combined with the crosslinking mechanism, ensures low curing shrinkage and prevents the formation of volatile or corrosive substances during the curing process.

TEGO® Surten 219 E surfactant is 100% active Gemini wetting agent technology for use in a wide range of aqueous applications. TEGO® Surten 219 E surfactant shows excellent dynamic surface tension reduction with low foam tendency. TEGO® Surten 219 E surfactant is easy-to handle liquid that contains no added alkylphenol ethoxylates (APEs).

VESTAMID® L2123 BK 9.7507 is a plasticized and high-viscosity polyamide 12 compound designed for the extrusion of flexible tubing and hoses, particularly in the automotive industry. This compound complies with DIN 73 378, Type: PA 12-PHL, for tubing. Thanks to its low moisture absorption, compounds based on PA 12 demonstrate minimal variation in properties with changing humidity. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. VESTAMID® L2123 BK 9.7507 features a high melt viscosity, optimized cold temperature impact resistance, and precise dimensional control during pipe extrusion. Supplied as cylindrical granules in moisture-proof bags, they are ready for seamless processing. Choose VESTAMID® L2123 BK 9.7507 for its reliability, high-viscosity performance, and excellent properties in your flexible tubing and hose extrusion applications.

VESTAMID® MLT 4300 is an established 4-layer tube for automotive fuel handling systems. It is a multilayer tubing system with an outer layer of VESTAMID® polyamide 12 and a barrier layer of ethylene vinyl alcohol (EVOH). VESTAMID® MLT 4300 offers excellent permeation resistance against ethanol-containing fuels and good cold impact performance.

ALBIDUR® EP 5340 A is a concentrated dispersion, containing 40% high-performance elastomer within a cycloaliphatic epoxy resin (EEC). This product plays a vital role as a toughness modifier, particularly suited for rigid and brittle epoxy resin systems. The elastomeric component consists of a specialized silicone rubber, intricately distributed within the liquid resin as an extremely finely dispersed second phase.

VESTAMID® L1833 BK 9.7623 is a 23% glass fiber-reinforced, easily demoldable, and heat-stabilized polyamide 12 compound. This compound is specifically formulated to provide efficient production of injection molded parts with short cycle times, thanks to its excellent mold release properties. VESTAMID® L1833 BK 9.7623 is supplied as cylindrical granules, conveniently packaged in moisture-proof bags, ensuring optimal storage conditions. Experience the reliability and performance of VESTAMID® L1833 BK 9.7623 in your injection molding applications. This compound, with its glass fiber reinforcement, offers enhanced strength and rigidity, while its demolding characteristics and heat stability contribute to efficient production. Choose VESTAMID® L1833 BK 9.7623 for its exceptional properties, ease of processing, and suitability for a wide range of injection molded parts.

VESTAMID® LX9001 BK 9.7504 is a heat-stabilized and light-resistant PA 12 compound specifically developed for the extrusion coating of steel tubes. This compound enhances the corrosion resistance of steel tubes through its exceptional impact strength, abrasion resistance, and chemical resistance. The excellent adhesion between the steel and the properly applied VESTAMID® LX9001 BK 9.7504 further contributes to this increased corrosion resistance. Additionally, VESTAMID® LX9001 BK 9.7504 offers the advantages of low water absorption, good dimensional stability, and consistent properties even in changing ambient humidity. Supplied as cylindrical pellets in moisture-proof packaging, they are ready for seamless processing. Experience the exceptional qualities of VESTAMID® LX9001 BK 9.7504 and enhance the performance and durability of steel tubes with its reliable coating solution.