Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Electrical & Electronics
Parts & Components
Products in Parts & Components
8,537 Products found in Parts & Components
Browse
Applications
Show All 12 Categories
Filters
Suppliers
Product Families
Functions
End Uses
Chemical Family
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Evonik
Evonik VQM 973
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives
End Uses:
Reactive Adhesive
Features:
Good Mechanical Properties
Evonik VQM 973 formulations consist of vinylfunctional QM resin and vinylfunctional silicone polymers. These formulas are used to produce materials that are transparent, free of fillers, and have great mechanical qualities. They can also improve the mechanical properties and flow behavior of systems that are filled.
Evonik
POLYCAT® SA 8
Functions:
Catalyst
Chemical Family:
Tertiary Amines, Amines
POLYCAT® SA 8 is a tertiary amine utilized to enhance the urethane reaction either through heat activation or when combined with co-catalysts at ambient temperature. This product finds application in coatings, adhesives, sealants, elastomers, and composites. By using formulations containing POLYCAT® SA 8, it is possible to achieve an extended pot life comparable to that of mercury catalysts.
Evonik
TEGOSIL® Heatban 200
Functions:
Stabilizer, Heat Stabilizer
Compatible Polymers & Resins:
Liquid Silicone Rubber (LSR), Silicones
End Uses:
Masterbatches, Industrial Applications, Consumer Applications
TEGOSIL® Heatban 200 is a heat stabilizer for cured silicone elastomers, especially high-consistency rubber (HCR). Like TEGOSIL® Heatban 110, this product offers protection against thermal degradation up to 300°C. It is compatible with various peroxide- and platinum-cured rubber materials commonly used in industrial and consumer applications. Its pasty viscosity simplifies incorporation into HCR formulations.
Evonik
VESTAMID® L2123 BK 9.7507
Polymer Name:
Polyamide 12 (PA 12)
Processing Methods:
Extrusion, Injection Molding, Pipe Extrusion, Tubing Extrusion
Additives Included:
UV Stabilizer, Processing Aid, Plasticizer (Unspecified), Light Stabilizer, Impact Modifier, Lubricant (Unspecified)
Materials Features:
Low Coefficient of Friction, Flexible, Oil Resistant, Lubricated, High Viscosity, Unreinforced, Impact Modified, UV Stabilized, Good Light Stability, Good Weather Stability, Electrically Insulating, Fuel Resistant, Good Thermal Stability, Good Impact Strength, Light Stabilized, Very Good Heat Resistance, High Melt Viscosity, Chemical Resistant, Dimensional Stability, Semi Crystalline, Plasticized, Low Temperature Impact Resistance, UV Resistant, Low Moisture Absorption, Impact Resistance
Color:
Black
VESTAMID® L2123 BK 9.7507 is a plasticized and high-viscosity polyamide 12 compound designed for the extrusion of flexible tubing and hoses, particularly in the automotive industry. This compound complies with DIN 73 378, Type: PA 12-PHL, for tubing. Thanks to its low moisture absorption, compounds based on PA 12 demonstrate minimal variation in properties with changing humidity. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. VESTAMID® L2123 BK 9.7507 features a high melt viscosity, optimized cold temperature impact resistance, and precise dimensional control during pipe extrusion. Supplied as cylindrical granules in moisture-proof bags, they are ready for seamless processing. Choose VESTAMID® L2123 BK 9.7507 for its reliability, high-viscosity performance, and excellent properties in your flexible tubing and hose extrusion applications.
Evonik
ALBIDUR® EP 5340 A
Chemical Family:
Epoxy & Epoxy Derivatives, Bisphenol Epoxy Resins, Silicones
Functions:
Toughener
Compatible Polymers & Resins:
Epoxies (EP)
Features:
High Temperature Resistance, Improved Surface Quality, Good Stability, Excellent Toughness, Impact Resistance, Good Toughness
ALBIDUR® EP 5340 A is a concentrated dispersion, containing 40% high-performance elastomer within a cycloaliphatic epoxy resin (EEC). This product plays a vital role as a toughness modifier, particularly suited for rigid and brittle epoxy resin systems. The elastomeric component consists of a specialized silicone rubber, intricately distributed within the liquid resin as an extremely finely dispersed second phase.
Evonik
VESTAMID® NRG 5901 BK
Polymer Name:
Polyamide 12 (PA 12)
Chemical Family:
Polyamides
Additives Included:
UV Stabilizer
Processing Methods:
Injection Molding, Pipe Extrusion, Profile Extrusion, Tubing Extrusion, Extrusion
Materials Features:
Excellent Toughness, Good Weather Stability, Hydrocarbon Resistant, Abrasion Resistant, High Temperature Application, Good Barrier Properties, Cost Effective, High Performance, Unreinforced, Corrosion Resistant, High Pressure Applications, UV Stabilized, Light Weight, Hydrolysis Resistant, Chemical Resistant, Good UV Resistance, Outdoor Durability, Good Thermal Stability, High Viscosity, Fatigue Resistant, Crack Resistant, UV Resistant, Hot Water Resistant, Weldable, Fuel Resistant, High Molecular Weight, Good Light Stability, Oil Resistant, Durable, Wear Resistant, Low Coefficient of Friction
Color:
Black
VESTAMID® NRG 5901 BK is a high-molecular-weight PA-12 material developed by Evonik. This exceptional material offers superior performance characteristics, making it an ideal choice for expanding the use of thermoplastic piping systems. With its ability to handle higher operating pressures and larger diameters, VESTAMID® NRG 5901 BK provides a safe and cost-effective alternative to metallic piping systems. In addition to extending the operating pressure limits of thermoplastic piping systems, it offers numerous benefits and, in many cases, outperforms conventional PE piping systems. Experience the reliability, durability, and enhanced performance of VESTAMID® NRG 5901 BK in your piping applications. Choose VESTAMID® NRG 5901 BK for its superior properties and cost-effective solution, ensuring the safe and efficient operation of your thermoplastic piping systems.
Evonik
VESTAMID® X7393 BK 9.7507
Polymer Name:
Polyamide 12 (PA 12)
Processing Methods:
Extrusion, Injection Molding, Profile Extrusion
Additives Included:
UV Stabilizer, Heat Stabilizer, Plasticizer (Unspecified), Light Stabilizer, Impact Modifier, Lubricant (Unspecified)
Flexural Modulus:
716.56 - 716.56 MPa
Materials Features:
Good Light Stability, Impact Modified, Good Weather Stability, Low Coefficient of Friction, Electrically Insulating, UV Resistant, Low Temperature Impact Resistance, Very Good Heat Resistance, High Viscosity, Unreinforced, Good Impact Strength, Flexible, Low Moisture Absorption, Plasticized, Oil Resistant, Heat Stabilized, Good Thermal Stability, UV Stabilized, Impact Resistance, Semi Rigid, Chemical Resistant, High Pressure Resistance, Lubricated, Light Stabilized, Fuel Resistant
VESTAMID® X7393 BK 9.7507 is a high-viscosity, plasticized, impact-modified, heat- and light-stabilized polyamide 12 compound for flexible tubing and hoses in the automobile industry. Parts made from VESTAMID® X7393 BK 9.7507 exhibit optimized cold temperature impact resistance, increased burst pressure resistance, a low coefficient of friction, and good chemical resistance.
Evonik
VESTAMID® MLT 8000
Polymer Name:
PA 12/ PP (Polyamide 12/ Polypropylene)
Physical Form:
Granules, Pellets, Tube, Solid
Features:
Hydrolysis Resistant, Low Temperature Impact Resistance, Light Weight, Excellent Hydrolysis Resistance, Electrically Insulating, High Hydrolytic Stability, Hot Water Resistant, Good Thermal Stability
Materials Features:
Good Thermal Stability, Excellent Hydrolysis Resistance, Hot Water Resistant, High Hydrolytic Stability, Low Temperature Impact Resistance, Light Weight, Hydrolysis Resistant, Electrically Insulating
VESTAMID® MLT 8000 is a proven 3-layer system for thermal management systems in the automotive industry. It consists of an outer layer of VESTAMID® polyamide 12 and a special polypropylene inner layer. The product offers high hydrolysis resistance against coolant liquids and urea solutions, good cold impact performance, and significant weight savings compared to less innovative concepts such as metal or rubber hoses.
Evonik
VESTAMID® eCO LX9039 BBM100
Polymer Name:
Polyamide 12 (PA 12)
Flexural Modulus:
1412.45 - 1412.45 MPa
Materials Features:
Unreinforced, Medium Viscosity
Color:
Natural
VESTAMID® eCO LX9039 BBM100 is a unique polyamide 12 product offered by Evonik. It is an unmodified polyamide 12 with medium viscosity and does not contain any stabilizers or processing aids. This specific formulation is typically utilized in special circumstances where the absence of additives is desired or the presence of processing aids could cause interference. The "eCO" in its name reflects Evonik's commitment to reducing CO2 emissions by utilizing renewable or circular feedstocks through a mass-balance approach. VESTAMID® eCO LX9039 BBM100 provides a reliable solution for applications requiring a pure polyamide 12 material without any additional additives, catering to specific requirements in various industries.
Evonik
Evonik Crosslinker 100
Chemical Family:
Silicones
Functions:
Crosslinking Agent
End Uses:
Reactive Sealant, Reactive Adhesive
Evonik Crosslinker 100, part of the Crosslinker 100 series, consists of polydimethylsiloxanes containing SiH groups within the polymer chain. In addition to SiH groups within the chain, the Crosslinker 100 series features terminal SiH groups. These crosslinkers are essential components of polyaddition silicones. When working with two-component silicone formulations, it is crucial to maintain strict separation between Pt catalysts (e.g., Catalyst 500 series) and SiH crosslinkers to ensure proper performance.
Mitsubishi Chemical Group Corporation
METABLEN™ S 2130
Functions:
Impact Modifier
Compatible Polymers & Resins:
Polylactic Acid (PLA), Polycarbonates (PC), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polyesters, Poly(Methyl Methacrylate) (PMMA)
Processing Methods:
Injection Molding
End Uses:
Battery Cases, Semiconductor Applications
METABLEN™ S 2130 is a silicone-acrylic-based rubber impact modifier optimized for flame retardant polycarbonate (PC) resins. It adds colorability, heat-aging resistance and impact strength to PC and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
jER™ Epoxy YX7110
Polymer Name:
Epoxy Resins & Compounds
Functions:
Binder & Resin, Resins, Binders & Matrix Materials, Impact Modifier, Resin, Adhesion Promoter, Coupling Agent
Chemical Family:
Epoxy & Epoxy Derivatives
jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jER™ YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
jER™ 1750
Polymer Name:
Epoxy Resins & Compounds
Functions:
Binder & Resin, Resins, Binders & Matrix Materials, Resin, Adhesion Promoter, Coupling Agent
Chemical Family:
Bisphenol F Type Epoxy, Bisphenol Epoxy Resins, Epoxy & Epoxy Derivatives
Labeling Claims:
High Purity
jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
SymaLITE®
Functions:
Molding Compound
Chemical Family:
Polyolefins, Polypropylenes (PP)
Reinforcement Material:
Polypropylene (PP), Glass Fibers
Processing Methods:
Compression Molding
End Uses:
Engine Covers, Covers, Headliners, Gearbox Covers, Undershield, Structural Components
SymaLITE is a special class of lightweight composites that offer low thermal expansion and exceptional mechanical and physical properties. Made from mixed glass and polymer fiber fleeces, SymaLITE is available in rolls and boards, which can be further molded into three-dimensional components using low-pressure molding.Features:Low thermal expansionExcellent mechanical and physical propertiesUltra-light and freely shapeableNoise-absorbentDirect facing with functional or decorative cover layers without adhesivesBenefits:Cost-efficient production of three-dimensional componentsDurable and noise-insulating material for car undershields and engine coversImpact-resistant and non-weathering for outdoor applications in the automotive and construction industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.Applications:Automotive and caravan industryConstruction sectorCar headlinersOutdoor applications in the automotive and caravan industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.
Mitsubishi Chemical Group Corporation
Semitron® HPV ESd PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Rods
Features:
ESD Protection, High Tolerance, Low Friction, Static-Dissipative, Anti-Static, Anti-Wear Properties, Good Machinability, Dimensional Stability
Color:
Black
Semitron® HPV ESd PEEK shapes are specially formulated with specific additives that make them an excellent performer in wear and friction applications where antistatic properties are essential. These shapes are specifically designed for electronic fixture applications that require a high degree of dimensional stability over an extended thermal range, as well as precise machinability.Features:Contains specific additives that provide excellent performance in wear and friction applicationsAntistatic properties for electronic fixture applicationsHigh dimensional stability over an extended thermal rangePrecise machinabilityBenefits:Improved performance in wear and friction applicationsReduced risk of static discharge damage to electronic componentsLong-lasting dimensional stability in high-temperature environmentsEasy to machine for precise applicationsApplications:Electronic fixture applications such as test sockets, contactors, and nestsWear and friction applications where antistatic properties are essentialHigh-temperature applications that require dimensional stability and precise machiningVacuum chamber components and other semiconductor equipment.
Mitsubishi Chemical Group Corporation
Semitron® ESd 520HR PAI
Polymer Name:
Polyamide-imide (PAI)
Physical Form:
Rods, Tube, Plates
Features:
Good Mechanical Properties, ESD Protection, High Strength, Very Good Heat Resistance, High Tolerance, Static-Dissipative, Odorless
Color:
Black
Semitron® ESd 520HR Polyamide-imide PAI electro static dissipative shapes are a unique and advanced solution for test equipment and device handling applications within the semiconductor and electronics industry. The product possesses the unique ability to resist dielectric breakdown at high voltages, and maintains its performance throughout the 100V to 1000V voltage range while offering the mechanical performance needed to excel in demanding applications.Features:Resists dielectric breakdown at high voltagesMaintains performance throughout the 100V to 1000V voltage rangeHigh strength and heat resistanceSurface resistivity of 10E10 to 10E12 ohms per squareBenefits:High mechanical strength results in longer useful life of the test heads and greater units (tested) per hour.Minimizes the risk of 'leakage' (cross-talk)Retains its surface resistivity at electrical forces greater than 100 volts.Applications:IC Device Testing Fixtures: A test fixture manufacturer recently began using Semitron ESd 520HR that combines electrostatic dissipation (ESD) and high mechanical strength, to make integrated circuit test heads.Test nests, sockets, and contactors for test equipment and other device handling components.Other applications where controlled bleed off of static charges is critical.
Mitsubishi Chemical Group Corporation
jER™ YX8040
Polymer Name:
Epoxy Resins & Compounds
Functions:
Binder & Resin, Resins, Binders & Matrix Materials, Resin, Adhesion Promoter, Coupling Agent
Chemical Family:
Epoxy & Epoxy Derivatives
Labeling Claims:
High Purity
jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
Semitron® ESd 490HR PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Rods, Tube, Plates
Features:
Dimensional Stability, High Stiffness, ESD Protection, High Strength, Good Thermal Stability, High Tolerance, Static-Dissipative, Odorless, Non Sloughing
Color:
Black
Semitron® ESd 490HR Polyetheretherketone PEEK electro static dissipative shapes offer similar physical properties as Semitron® ESd 480 PEEK, but exhibit a higher resistivity value in the 10E8 to 10E10 ohms per square range. Semitron® ESd 490HR PEEK components are thermally stable to temperatures of 490° F / 270° C without degradation, and also possess high structural strength and stiffness combined with excellent dimensional stability. Furthermore, this particular grade is non-sloughing, which is why it is an ideal solution for socket, nest, and contactor manufacturing for test equipment, and other electronic device handling applications.Features:High resistivity value in the 10E8 to 10E10 ohms per square rangeThermally stable to temperatures of 490° F / 270° C without degradationHigh structural strength and stiffnessExcellent dimensional stabilityNon-sloughingBenefits:Ideal for socket, nest, and contactor manufacturing for test equipmentSuitable for electronic device handling applicationsNon-sloughing feature makes it a good option for applications where debris generation is a concernHigh thermal stability and dimensional stability make it suitable for high-temperature and critical applicationsApplications:Socket, nest, and contactor manufacturing for test equipmentElectronic device handling applicationsOther high-temperature and critical applications requiring high resistivity, thermal stability, and dimensional stability.
Mitsubishi Chemical Group Corporation
METABLEN™ S 2001
Functions:
Impact Modifier
Compatible Polymers & Resins:
Polylactic Acid (PLA), Recycled Plastics, Polybutylene Terephthalate (PBT), Polycarbonates (PC), Polyvinyl Chloride (PVC), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polyesters, Poly(Methyl Methacrylate) (PMMA)
Processing Methods:
Injection Molding
End Uses:
Battery Cases, Semiconductor Applications, Appliances
METABLEN™ S 2001 is a silicone-acrylic rubber-type impact modifier with high impact strength in all temperatures and excellent weatherability. It can be used with ABS, PC, PLA, and other matrix resins in a variety of automotive, aerospace and electric and electronic applications. Features Can be used with recycled plastics Good weather stability Low temperature impact resistance *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
jER™ YX7105
Polymer Name:
Epoxy Resins & Compounds
Functions:
Resins, Binders & Matrix Materials, Impact Modifier, Adhesion Promoter, Coupling Agent, Binder & Resin, Resin
Chemical Family:
Epoxy & Epoxy Derivatives
Compatible Substrates & Surfaces:
Aluminum, Steel, Fibers & Fabrics, Glass, Plastics, Metal, Concrete, Ceramic
jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
jER™ YX8000D
Polymer Name:
Epoxy Resins & Compounds
Functions:
Resins, Binders & Matrix Materials, Adhesion Promoter, Coupling Agent, Binder & Resin, Resin
Chemical Family:
Bisphenol A Type Epoxy, Bisphenol Epoxy Resins, Epoxy & Epoxy Derivatives
End Uses:
Radiation Curable Coating, Semiconductor Applications
Compatible Substrates & Surfaces:
Glass, Fibers & Fabrics, Concrete, Metal, Ceramic, Aluminum, Plastics, Steel
Features:
Transparency, Low Chlorine Content, Faster Cure Time, LED-curable, Radiation Curable, Fast Cure, UV Curable, Excellent Adhesion
jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
METABLEN™ S X-005
Functions:
Impact Modifier
Compatible Polymers & Resins:
Polycarbonates (PC), Acrylonitrile Butadiene Styrene (ABS), Poly(Methyl Methacrylate) (PMMA), Polyolefins, Polylactic Acid (PLA), Polybutylene Terephthalate (PBT), Polyvinyl Chloride (PVC), Polypropylenes (PP), Polyamides, Polyesters, Polyethylenes (PE)
Processing Methods:
Injection Molding
End Uses:
Appliances, Battery Cases, Semiconductor Applications
METABLEN™ S X-005 is a silicone-acrylic rubber-type impact modifier that provides flame retardance, hydrolysis resistance and impact strength. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesFlame retardantWeather stabilityHydrolysis resistanceImpact resistance even at low temperaturesLow friction*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
jER™ YX4000
Polymer Name:
Epoxy Resins & Compounds
Functions:
Resins, Binders & Matrix Materials, Adhesion Promoter, Coupling Agent, Binder & Resin, Resin
Chemical Family:
Epoxy & Epoxy Derivatives
Compatible Substrates & Surfaces:
Aluminum, Steel, Fibers & Fabrics, Glass, Plastics, Metal, Concrete, Ceramic
jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
Semitron® ESd 500 HR PTFE
Polymer Name:
Polytetrafluoroethylene (PTFE)
Physical Form:
Rods, Plates
Features:
Thermally Insulating, Dimensional Stability, Chemical Resistant, ESD Protection, Low Coefficient of Friction, Good Thermal Stability, High Tolerance, Low Friction, Static-Dissipative, Odorless
Color:
White
Semitron® ESd 500HR Polytetrafluoroethylene PTFE electro static dissipative shapes offer an excellent combination of low frictional properties, outstanding dimensional stability, and a high resistivity range of 10E9 to 10E11 ohms per square. Reinforced with a proprietary synthetic mica, Semitron® ESd 500HR PTFE is thermally stable up to temperatures of 500° F / 260° C without degradation, and possesses high thermal insulation and a low coefficient of friction. Due to these characteristics, this grade is ideal for applications where controlled bleed off of static charges is critical.Features:Reinforced with a proprietary synthetic mica for improved performanceLow frictional properties and outstanding dimensional stabilityHigh resistivity range of 10E9 to 10E11 ohms per squareThermally stable up to temperatures of 500° F / 260° C without degradationHigh thermal insulation and low coefficient of frictionBenefits:Ideal for applications where controlled bleed off of static charges is criticalCan withstand high temperatures without degradationLow coefficient of friction and high thermal insulation provide improved performance in various applicationsApplications:Inserts for sensitive devices to reduce damage from static dischargeOther applications where controlled bleed off of static charges is critical and PTFE is typically used.Suitable for use in various industries including semiconductor and electronics, aerospace, and industrial machinery.
Mitsubishi Chemical Group Corporation
jER™ YL980
Polymer Name:
Epoxy Resins & Compounds
Functions:
Coupling Agent, Resins, Binders & Matrix Materials, Adhesion Promoter, Binder & Resin, Resin
Chemical Family:
Bisphenol A Type Epoxy, Bisphenol Epoxy Resins, Epoxy & Epoxy Derivatives
End Uses:
Underfill, Semiconductor Applications
Compatible Substrates & Surfaces:
Concrete, Aluminum, Fibers & Fabrics, Metal, Ceramic, Plastics, Steel, Glass
Features:
Low Chlorine Content, Excellent Electrical Insulation, Good Mechanical Properties, Water Resistant, Chemical Resistant, Electrically Insulating, Abrasion Resistance, Water Resistance, Improved Dimensional Stability, Reduced Wear, Good Electrical Properties, Chemical Resistance, Heat Resistance, Improved Flexibility, Flame Retardant
jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
METABLEN™ A 3800
Functions:
Anti-Drip Agent
Compatible Polymers & Resins:
Polystyrenes (PS), Polycarbonates (PC), Acrylonitrile Butadiene Styrene (ABS), Polyolefins, Thermoplastic Polyurethane (TPU), Polyvinyl Chloride (PVC), Polypropylenes (PP), Polyamides, Polyesters, Polyethylenes (PE)
Processing Methods:
Injection Molding, Compounding, Structural Foam Molding, Blow Molding
Synonyms:
Fluon, Perfluoroethylene polymer, Poly(ethylene tetrafluoride), Polyperfluoroethylene, Polytetrafluoroethene, Polytetrafluoroethylene, PTFE, Teflon, Tetrafluoroethene homopolymer, Tetrafluoroethene polymer, Tetrafluoroethylene homopolymer, Tetrafluoroethylene polymer, Tetrafluoroethylene resin
METABLEN™ A 3800 is acrylic-modified polytetrafluoroethylene (PTFE) that can be used as an anti-dripping agent for flame retardant formulations. It can be used for PC and alloy in automotive, aerospace, consumer goods, and electric and electronics applications.BenefitsResins with METABLEN™ A-3800 and flame retardant achieve V-0 in UL-94 testingImproves melt tensionIncreases die swellEnhances surface appearanceIncreases foam expansion ratio FeaturesAnti-dripping capabilityEasy to handle and processFlame retardantGood mechanical propertiesDisperses better than standard PTFE powders *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
METABLEN™ S 2100
Functions:
Impact Modifier
Compatible Polymers & Resins:
Polylactic Acid (PLA), Polybutylene Terephthalate (PBT), Polycarbonates (PC), Polyvinyl Chloride (PVC), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polyesters, Poly(Methyl Methacrylate) (PMMA)
Processing Methods:
Injection Molding
End Uses:
Battery Cases, Semiconductor Applications, Appliances
METABLEN™ S 2100 is a silicone-acrylic-based rubber impact modifier with good colorability and impact strength. It is used for polycarbonates (PC) and polycarbonate blends, polyvinyl chloride, engineering plastics and polyolefins in a variety of automotive, aerospace, consumer goods, and electric and electronic applications. METABLEN™ S-2100 provides ductility on facial impact tests, even after immersion of coating chemicals. The effect is maintained at higher molding temperatures. BenefitsEasy to processFlame retardancy for engineering plastics and polyolefins elastomersFeaturesGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
METABLEN™ A 3000
Chemical Family:
Fluoropolymers, Acrylics, Acrylates & Methacrylates
Functions:
Processing Aid
Compatible Polymers & Resins:
Polystyrenes (PS), Polyesters, Polycarbonates (PC), Polyamides, Polyolefins, Poly(Methyl Methacrylate) (PMMA), Thermoplastic Polyurethane (TPU), Polyvinyl Chloride (PVC), Acrylonitrile Butadiene Styrene (ABS), Polylactic Acid (PLA), Polypropylenes (PP), Polyethylenes (PE)
Processing Methods:
Machining, Structural Foam Molding, Calendering, Extrusion, Profile Extrusion, Blow Molding
End Uses:
Automotive Interior Parts, Electrical/Electronic Applications, Housings, Consumer Applications, Wires, Furniture, Office Automation Equipment, Profiles, Cables
Synonyms:
Fluon, Perfluoroethylene polymer, Poly(ethylene tetrafluoride), Polyperfluoroethylene, Polytetrafluoroethene, Polytetrafluoroethylene, PTFE, Teflon, Tetrafluoroethene homopolymer, Tetrafluoroethene polymer, Tetrafluoroethylene homopolymer, Tetrafluoroethylene polymer, Tetrafluoroethylene resin
METABLEN™ A 3000 is an acrylic-modified polytetrafluoroethylene (PTFE) used in vacuum molding, foam molding, blow molding and profiling. It improves the melt tension that is required in these processing methods by minimizing increases in melt viscosity, without sacrificing the inherent properties of thermoplastics.BenefitsIncreases melt tension of a resinMaintains fluidityEnhances die swellImproves the flexural modulus, heat deformation temperature, and other properties of polypropyleneAnti-drip effect with flame-retardant resinsImproves filler dispersibilityBetter surface appearanceIncreases foam expansion ratioApplicationsAutomotiveConsumer goodsElectric and electronics*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
jER™ YX7400N
Polymer Name:
Epoxy Resins & Compounds
Functions:
Resins, Binders & Matrix Materials, Impact Modifier, Adhesion Promoter, Coupling Agent, Binder & Resin, Resin
Chemical Family:
Epoxy & Epoxy Derivatives
End Uses:
Semiconductor Applications, Conformal Coating
Features:
Excellent Elasticity, Reduced Wear, Good Mechanical Properties, Abrasion Resistance, Impact Resistance, Good Elasticity, Improved Flexibility, High Impact Resistance, Excellent Resilience, Improved Dimensional Stability
jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
METABLEN™ A 3750
Functions:
Anti-Drip Agent
Compatible Polymers & Resins:
Polystyrenes (PS), Polycarbonates (PC), Acrylonitrile Butadiene Styrene (ABS), Polyolefins, Polyvinyl Chloride (PVC), Polypropylenes (PP), Polyamides, Polyesters, Polyethylenes (PE)
Processing Methods:
Injection Molding, Profile Extrusion, Compounding, Extrusion, Vacuum Casting, Structural Foam Molding, Blow Molding
Synonyms:
Fluon, Perfluoroethylene polymer, Poly(ethylene tetrafluoride), Polyperfluoroethylene, Polytetrafluoroethene, Polytetrafluoroethylene, PTFE, Teflon, Tetrafluoroethene homopolymer, Tetrafluoroethene polymer, Tetrafluoroethylene homopolymer, Tetrafluoroethylene polymer, Tetrafluoroethylene resin
METABLEN™ A-3750 is an acrylic-modified polytetrafluoroethylene (PTFE) used as an anti-dripping agent in flame retardant formulations. It can be used for PC and alloy in automotive, aerospace, consumer goods, and electric and electronic applications.BenefitsResins with METABLEN™ A-3750 and flame retardants achieve V-0 in UL-94 testingImproves melt tensionIncreases die swell to improve surface appearanceImproves filler dispersibilityIncreases foam expansion ratioFeaturesAnti-drippingEasy to handleHigher dispersibility than standard PTFE powders*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
METABLEN™ S 2200
Functions:
Impact Modifier
Compatible Polymers & Resins:
Polylactic Acid (PLA), Polybutylene Terephthalate (PBT), Polycarbonates (PC), Polyvinyl Chloride (PVC), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polyesters, Poly(Methyl Methacrylate) (PMMA)
Processing Methods:
Injection Molding
End Uses:
Battery Cases, Semiconductor Applications, Appliances
METABLEN™ S 2200 is a silicone-acrylic-based rubber impact modifier with an epoxy-modified shell.Compatible with Polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyamide (PA) and alloy, it provides hydrolysis resistance, heat-aging resistance and impact strength for a wide range of automotive, aerospace and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group
Mitsubishi Chemical Group Corporation
jER™ YL983U
Polymer Name:
Epoxy Resins & Compounds
Functions:
Coupling Agent, Resins, Binders & Matrix Materials, Adhesion Promoter, Binder & Resin, Resin
Chemical Family:
Bisphenol Epoxy Resins, Epoxy & Epoxy Derivatives, Bisphenol F Type Epoxy
End Uses:
Underfill, Semiconductor Applications
Compatible Substrates & Surfaces:
Concrete, Aluminum, Fibers & Fabrics, Metal, Ceramic, Plastics, Steel, Glass
Features:
Low Chlorine Content, Excellent Electrical Insulation, Good Mechanical Properties, Water Resistant, Chemical Resistant, Low Viscosity, Electrically Insulating, Abrasion Resistance, Water Resistance, Improved Dimensional Stability, Reduced Wear, Good Electrical Properties, Good Elastic Recovery, Chemical Resistance, Heat Resistance, Improved Flexibility
jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
γ - Butyrolactone (GBL)
Chemical Name:
Gamma Butyrolactone
CAS Number:
96-48-0
Functions:
Electrolyte, Solvent
Chemical Family:
Butyrolactones, Ketones
Synonyms:
1-Oxacyclopentan-2-one, 1,4-Lactone, 2-oxolanone, 2-Oxotetrahydrofuran, 4-Butanolide, 4-Butyrolactone, 4-Deoxytetronate, 4-Hydroxybutanoate, 4-Hydroxybutanoic acid, gamma-Butalactone, gamma-Butyryllactone, Oxolan-2-one, Tetrahydrofuran-2-one, γ-Butyrolactone
γ - Butyrolactone (GBL) has a wide range of practical applications because of its low freezing point, high boiling point, and a unique combination of solvent and electrical properties. It has applications as a solvent for special resins, in photography, in batteries, and as an electrolyte. Also a number of derivatives are synthesized from GBL.
Mitsubishi Chemical Group Corporation
Duratron® T4203 PAI
Polymer Name:
Polyamide-imide (PAI)
Physical Form:
Tube, Plates, Rods
Features:
High Temperature Resistance, Good Impact Strength, Good Abrasion Resistance, Creep Resistant, Low Thermal Expansion, Good Compressive Strength, Wear Resistant, High Strength, High Tolerance, High Loading Absorption Capability, High Elongation, Odorless, Excellent Toughness, Electrically Insulating, Good Machinability, Dimensional Stability
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
4200.0 - 4200.0 MPa
Color:
Brown
Duratron® T4203 PAI is a polyamide-imide material that offers exceptional strength and durability in high-tech equipment and structural applications. With features such as high impact strength, high elongation, and dimensional stability, it is a reliable choice for precision parts and components that require high performance in extreme conditions.Features:High impact strengthHigh elongationDimensional stabilityHigh temperature resistanceExceptional machinabilityBenefits:Able to withstand extreme conditions and loadsIdeal for precision parts and components in high-tech equipmentSuitable for structural applications such as linkages and seal ringsExcellent choice for wear applications involving impact loading and abrasive wearApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearPrecision parts in high-tech equipment
Mitsubishi Chemical Group Corporation
Semitron® MPR-1000
Polymer Name:
Polyamide-imide (PAI)
Physical Form:
Plates, Rods
Features:
Very Good Heat Resistance, High Tolerance, High Durability, Chipping Resistance, Low Outgassing, Good Machinability
Density:
1470.0 - 1470.0 kg/m³
Tensile Modulus:
6050.0 - 6050.0 MPa
Color:
Yellow, Brown
Semitron® MPR 1000 - an advanced engineering material that is specially developed for use in the semiconductor and electronics industry. This material boasts excellent heat resistance and low erosion rates in plasma chambers, making it a top choice for vacuum chamber applications such as etch, CVD, and ion implant.Features:Longevity: Increased life in plasma chambers (up to 25X over polyimide in ozone)Clean: Low ionic metal content and low out-gassingValue: Lower overall cost in use compared to traditional materials used in vacuum chamber applications such as quartz, ceramics, and engineering plasticsBenefits:Long-lasting performance in plasma-based vacuum chambersLow maintenance and cost-effective solutionClean and efficient, suitable for semiconductor and electronics industryApplications:Clamp ringsTrench ringsScrewsPinsShower headsCentering pinsFocus ringsInsulatorsVacuum padsWafer guidesSemitron® MPR 1000 is a versatile material that is ideal for use in vacuum chamber applications within the semiconductor and electronics industry. With its outstanding heat resistance and low erosion rates, this material is a cost-effective and efficient solution that ensures longevity and clean performance in plasma-based vacuum chambers.
Mitsubishi Chemical Group Corporation
Altron™ PC
Polymer Name:
Polycarbonate (PC)
Physical Form:
Plates
Features:
High Impact Resistance, Low Moisture Absorption, High Strength, Excellent Dielectric Properties, Amorphous, Acid Resistant, High Tolerance, UV Stabilized, Good Electrical Properties, High Modulus of Elasticity, Good Impact Strength
Density:
1200.0 - 1200.0 kg/m³
Tensile Modulus:
2400.0 - 2400.0 MPa
Color:
Transparent
Altron™ 1000 PC machine grade polycarbonate is a transparent, amorphous thermoplastic that offers exceptional impact strength and elasticity, minimal moisture absorption, and outstanding resistance to acidic solutions. This grade is produced from select batches of non-UV stabilized polycarbonate resin that complies with EU and FDA regulations for plastics intended to come into contact with food products.Features:Transparent, amorphous thermoplasticSuperior impact strengthSuperior flexural modulus of elasticityMinimal moisture absorptionOutstanding resistance to acidsGreat electrical characteristicsBenefits:Durable and able to withstand high impactsResistant to deformation under loadLow moisture absorption means no swelling or warpingResistant to acidic solutions, making it suitable for a variety of applicationsExcellent electrical characteristics, making it suitable for semiconductor and electronics applicationsApplications:Semiconductor and electronics applicationsTransparent structural applicationsFood contact applications that comply with EU and FDA regulations
Show
36
of 8,537 results
Go to page
1
2
3
4
5
6
7
8
9
10