Products in Parts & Components

DABCO® T 120 is a potent catalyst used for urethane reactions (gelling), offering excellent hydrolytic stability on the resin side. It is a dibutyl tin-based catalyst that displays high catalytic activity and enhanced hydrolytic stability. This catalyst finds application in spray foam, rigid polyurethanes, and high-resiliency flexible molded products.

Evonik Polymer VS 500 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

VESTAMID® LX9008 BK 9.7504 is a plasticizer-free polyamide 12 compound renowned for its exceptional long-term resistance under thermal load. This compound is specifically designed for the production of flexible tubes exposed to higher temperatures, making it ideal for applications in the engine compartment of motor vehicles. When utilized as diesel fuel lines, VESTAMID® LX9008 BK 9.7504 demonstrates significant advantages over standard grades, as evident in storage tests with diesel fuel. With low moisture absorption, this material maintains the dimensions and properties of finished parts even in changing ambient conditions. However, when using VESTAMID® LX9008 BK 9.7504 for fuel lines, certain prerequisites must be considered. Experience the outstanding long-term thermal resistance and reliability of VESTAMID® LX9008 BK 9.7504 for your demanding applications.

VESTAKEEP® 4000 GF30 is a glass fiber-reinforced (30%) polyether ether ketone specifically designed for injection molding applications. This semi-crystalline polymer offers superior mechanical, thermal, and chemical resistance, ensuring exceptional performance. Parts manufactured from VESTAKEEP® 4000 GF30 exhibit low flammability, enhancing safety. Compatible with common injection molding machines for thermoplastics, this material simplifies the manufacturing process. Experience the reliability and versatility of VESTAKEEP® 4000 GF30 in your injection molding applications. With its glass fiber reinforcement, it provides enhanced strength and rigidity, while maintaining excellent properties in challenging environments. Choose VESTAKEEP® 4000 GF30 for its superior mechanical performance, thermal stability, chemical resistance, and ease of processing, enabling the production of high-quality injection molded parts.

VESTAMID® L2140 BK 9.7504 is a heat- and light-stabilized polyamide 12 compound designed for extrusion of tubing and semi-finished products such as fuel lines. The properties of this material are minimally affected by changing humidity due to its low moisture absorption. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance.

VESTAMID® L1833 BK 9.7623 is a 23% glass fiber-reinforced, easily demoldable, and heat-stabilized polyamide 12 compound. This compound is specifically formulated to provide efficient production of injection molded parts with short cycle times, thanks to its excellent mold release properties. VESTAMID® L1833 BK 9.7623 is supplied as cylindrical granules, conveniently packaged in moisture-proof bags, ensuring optimal storage conditions. Experience the reliability and performance of VESTAMID® L1833 BK 9.7623 in your injection molding applications. This compound, with its glass fiber reinforcement, offers enhanced strength and rigidity, while its demolding characteristics and heat stability contribute to efficient production. Choose VESTAMID® L1833 BK 9.7623 for its exceptional properties, ease of processing, and suitability for a wide range of injection molded parts.

VESTAMID® MLT 4800 is an innovative 'low extractable' 5-layer tube designed for automotive fuel handling systems. It consists of an outer layer of VESTAMID® polyamide 12, a barrier layer of ethylene vinyl alcohol (EVOH), and an inner layer of VESTAMID® polyamide 612. VESTAMID® MLT 4800 offers excellent barrier properties against ethanol-containing fuels and has very low extractables. It exhibits excellent cold impact properties, like all Evonik multilayer systems.

VESTAMID® LX9001 BK 9.7504 is a heat-stabilized and light-resistant PA 12 compound specifically developed for the extrusion coating of steel tubes. This compound enhances the corrosion resistance of steel tubes through its exceptional impact strength, abrasion resistance, and chemical resistance. The excellent adhesion between the steel and the properly applied VESTAMID® LX9001 BK 9.7504 further contributes to this increased corrosion resistance. Additionally, VESTAMID® LX9001 BK 9.7504 offers the advantages of low water absorption, good dimensional stability, and consistent properties even in changing ambient humidity. Supplied as cylindrical pellets in moisture-proof packaging, they are ready for seamless processing. Experience the exceptional qualities of VESTAMID® LX9001 BK 9.7504 and enhance the performance and durability of steel tubes with its reliable coating solution.

TEGO® Surten 228 E surfactant is a specially formulated wetting agent designed for diverse aqueous applications. This surfactant excels in delivering rapid wetting of pigments and substrates, owing to its remarkable ability to reduce surface tension dynamically. TEGO® Surten 228 E surfactant boasts universally balanced properties, making it suitable for a wide range of applications.

KOSMOS® MB 10 is a strong gel catalyst for polyether-based systems, utilizing a combination of tin and bismuth. It facilitates a robust gelling reaction. It is sensitive to moisture and requires the correct handling during storage and production to maintain high performance.

NANOPOL® A 720 is a flexible dispersion of colloidal silica in n-butyl acetate solvent. The silica phase is composed of surface-modified, synthetic SiO₂-spheres that are very small in size (Ø 20 nm) and have a narrow particle size distribution. Despite having a high SiO₂-content of 50 wt%, NANOPOL® A 720 is transparent, low in viscosity, and does not show sedimentation due to the agglomerate-free dispersion of the nanoparticles in the solvent. It significantly improves tear resistance, fracture toughness, and modulus. NANOPOL® A 720 can be used to formulate highly filled, transparent adhesives based on various reactive resins. It is also easy to process due to its uncritical solvents.

POLYCAT® SA 2 LE is a low-emissive, delayed-action tertiary amine based on DBU. It effectively enhances the urethane reaction when heat is applied, making it suitable for microcellular, integral skin, coating, adhesive, sealant, and elastomer applications. This product is especially recommended for use with low-activity aliphatic isocyanates.

DABCO® T 12 (dibutyltin dilaurate, DBTDL) is a catalyst that enhances the urethane (polyol-isocyanate) reaction in the manufacturing of flexible and rigid polyurethane foams, coatings, adhesives, and sealants. It promotes rapid gel and tack-free times, contributing to improved mechanical properties in molded and slabstock foams.

VESTAMID® L1670 is a low-viscosity polyamide 12 compound that has been specifically developed with heat and light stabilization for the extrusion of thin wire insulations and cable jacketings. Coatings made from VESTAMID® L1670 demonstrate a low coefficient of friction, which greatly facilitates the process of laying cables. This compound is well-suited for profile extrusion and wire and cable extrusion processing techniques.

VESTAMID® L2124 BK 9.7507 is a plasticized polyamide 12 compound specially formulated for the extrusion of flexible tubing and hoses in oil and petrochemical applications. This heat- and light-stabilized compound complies with DIN 73-378, Type: PA 12-PHL, for tubing. Its low moisture absorption ensures minimal variation in properties with changing humidity. Manufactured with exceptional impact strength, a low coefficient of friction, and good chemical resistance, parts made from VESTAMID® L2124 BK 9.7507 exhibit outstanding performance. With its high melt viscosity and precise dimensional control during pipe extrusion, this semi-crystalline material provides reliability and ease of processing. Supplied as cylindrical granules in moisture-proof bags, VESTAMID® L2124 BK 9.7507 is ready for seamless integration into your production process.

POLYCAT® SA 102 is a heat-activated catalyst that offers excellent front-end delay, activated at a thermo-activation temperature of approximately 60 °C (140°F). This catalyst is specifically recommended for artificial turf applications. It belongs to the category of blocked amine catalysts, which are known for their ability to provide delayed reaction profiles.

VESTAMID® L1930 BK 9.7503 is a heat-stabilized PA 12 compound reinforced with 30% milled glass fibers. It is suitable for injection molding applications. The reinforcement provides high strength and rigidity to the moldings. Due to the low water absorption of PA 12, parts made from this compound exhibit good dimensional stability and maintain mechanical properties even with changing ambient humidity.

Evonik Modifier 705 refers to SiH-terminated polydimethyl siloxanes utilized as plasticizers in addition-curing silicones. Due to their difunctional structure, these products do not crosslink but extend the chains of vinyl-terminated silicone polymers (Polymer VS). The use of these modifiers reduces crosslinking density and, consequently, the elastomer's hardness.

VESTAMID® NRG 1001 is a high-viscosity, plasticized, and impact-modified PA 12 compound with heat and light stabilizers for the extrusion of flexible tubing and hoses, particularly for oil and petrochemical applications. It offers easy processing and good dimensional control during pipe extrusion, especially for large pipe diameters.

VESTAMID® NRG 2101 YE is a high-molecular-grade PA-12 material developed by Evonik. It is designed for use in thermoplastic piping systems at higher operating pressures and larger diameters, replacing metallic piping systems in a safe and cost-effective manner. It offers superior performance characteristics.

VESTAMID® MLT 4300 is an established 4-layer tube for automotive fuel handling systems. It is a multilayer tubing system with an outer layer of VESTAMID® polyamide 12 and a barrier layer of ethylene vinyl alcohol (EVOH). VESTAMID® MLT 4300 offers excellent permeation resistance against ethanol-containing fuels and good cold impact performance.

VESTAMID® L1723 BK 9.7624 is a low-viscosity, plasticized PA12 resin suitable for injection molding. It has been developed specifically for the production of strip clips and cable ties. The parts made from this resin maintain their dimensions in environments with varying humidity levels while possessing high tenacity, a low coefficient of friction, and good chemical resistance.

VESTAMID® X7393 NC is a high-viscosity, plasticized, impact-modified, heat- and light-stabilized polyamide 12 compound used for flexible tubing and hoses in the automobile industry. Parts made from VESTAMID® X7393 NC exhibit optimized cold temperature impact resistance and increased burst pressure resistance in the extrusion of semi-rigid tubing. Additionally, it offers an exceptional low coefficient of friction and good chemical resistance.

DABCO® DC 1 is designed to delay the initiation of the reaction while ensuring a robust curing process by enhancing the urethane (polyol-isocyanate) reaction in various flexible molded polyurethane foams, making it particularly suitable for NVH applications. It is a suitable option for applications that demand lower or no emissions from amines.

VESTAMID® MLT 7440 is an automotive industry-proven 5-layer tube specifically designed for fuel handling systems. This system features an outer layer of VESTAMID® polyamide 12, along with two barrier layers: ethylene vinyl alcohol (EVOH) as the middle layer and a fluoropolymer, EFEP NEOFLONTM, as the inner layer. With excellent resistance properties against alcohol-containing fuels, the MLT 7400 offers superior chemical resistance on the inner tube surface and a close-to-zero extraction level. In certain regions, antistatic properties may be required, which are fulfilled by the multilayer tubing system (MLT) 7440. Based on the same design, the MLT 7440 incorporates a conductive fluoropolymer EFEP NEOFLONTM inner layer. Experience the reliability and exceptional performance of the multilayer tubing systems (MLT) 7400 and (MLT) 7440 in fuel handling systems, ensuring superior fuel resistance and meeting the specific requirements of your automotive applications.

VESTAMID® X7297 BK 9.7507 is a plasticized polyamide 12 compound with a heat and light stabilizer for the extrusion of flexible tubing and hoses, especially for automotive applications. It is characterized by easy processing and high impact strength at low temperatures.

TEGOSIL® Heatban 200 is a heat stabilizer for cured silicone elastomers, especially high-consistency rubber (HCR). Like TEGOSIL® Heatban 110, this product offers protection against thermal degradation up to 300°C. It is compatible with various peroxide- and platinum-cured rubber materials commonly used in industrial and consumer applications. Its pasty viscosity simplifies incorporation into HCR formulations.

ALBIDUR® EP 5340 A is a concentrated dispersion, containing 40% high-performance elastomer within a cycloaliphatic epoxy resin (EEC). This product plays a vital role as a toughness modifier, particularly suited for rigid and brittle epoxy resin systems. The elastomeric component consists of a specialized silicone rubber, intricately distributed within the liquid resin as an extremely finely dispersed second phase.

VESTAMID® X7167 NC is a high-quality polyamide 12 (PA12) compound formulated for exceptional heat stability and flame retardancy. This compound incorporates a non-migrating flame retardant that is free of halogens and phosphorous, making it an ideal choice for interior parts in aircraft, railways, and ships. VESTAMID® X7167 NC meets the stringent requirements of FAR 25.853 or ABD 0031, ensuring compliance and safety in these demanding applications. This versatile resin can be processed through extrusion or injection molding methods. However, it is important to note that the melt temperature should not exceed 260 °C to maintain the effectiveness of the flame retardant. We recommend melt temperatures within the range of 210–230 °C for optimal performance. VESTAMID® X7167 NC is conveniently supplied as cylindrical pellets, packaged in moisture-proof bags, ready for immediate use. Trust VESTAMID® X7167 NC for reliable and flame-resistant solutions in interior component manufacturing.

VESTAMID® MLT 7400 is a proven 5-layer tube designed specifically for fuel handling systems in the automotive industry. This innovative system features an outer layer of VESTAMID® polyamide 12, along with two barrier layers: ethylene vinyl alcohol (EVOH) as the middle layer and a fluoropolymer, EFEP NEOFLONTM, as the inner layer. The combination of these materials provides exceptional resistance to alcohol-containing fuels, superior chemical resistance on the inner tube surface, and virtually zero extraction levels. VESTAMID® MLT 7400 delivers reliable performance and durability. It comes in the form of pellets or granules, allowing for easy integration into manufacturing processes. With its excellent thermal stability and resistance to oil and fuels, this tube finds extensive applications in the automotive and mobility sectors.

VESTAMID® LX9112 BK is a heat-stabilized, conductive polyamide 12 compound specifically developed for the pore-free extrusion coating of steel tubing. It stands out from commonly used conductive extrusion compounds due to its significantly lower melt viscosity and outstanding extrusion characteristics, even in very thin coatings.

VESTAMID® NRG 5901 BK is a high-molecular-weight PA-12 material developed by Evonik. This exceptional material offers superior performance characteristics, making it an ideal choice for expanding the use of thermoplastic piping systems. With its ability to handle higher operating pressures and larger diameters, VESTAMID® NRG 5901 BK provides a safe and cost-effective alternative to metallic piping systems. In addition to extending the operating pressure limits of thermoplastic piping systems, it offers numerous benefits and, in many cases, outperforms conventional PE piping systems. Experience the reliability, durability, and enhanced performance of VESTAMID® NRG 5901 BK in your piping applications. Choose VESTAMID® NRG 5901 BK for its superior properties and cost-effective solution, ensuring the safe and efficient operation of your thermoplastic piping systems.

VESTAMID® MLT 4500 is a well-established 5-layer tube designed for automotive fuel handling systems. This system features an outer and inner layer of VESTAMID® polyamide 12, providing excellent performance and durability. The MLT 4500 series also incorporates a barrier layer of ethylene vinyl alcohol (EVOH), offering superior permeation resistance against alcohol-containing fuels. Additionally, it delivers exceptional cold impact performance, ensuring reliable operation even in challenging conditions. In specific regions where antistatic properties are required, the multilayer tubing system (MLT) 4540 is available. Based on the same design, the MLT 4540 includes a conductive VESTAMID® polyamide 12 inner layer to fulfill the antistatic requirements. Experience the reliability and versatility of the MLT 4500 series and MLT 4540 in automotive fuel handling systems, ensuring efficient fuel transport and meeting the specific needs of your applications.

Evonik Crosslinker 110, part of the Crosslinker 100 series, consists of polydimethylsiloxanes containing SiH groups within the polymer chain. In addition to SiH groups within the chain, the Crosslinker 100 series features terminal SiH groups. These crosslinkers are essential components of polyaddition silicones. When working with two-component silicone formulations, it is crucial to maintain strict separation between Pt catalysts (e.g., Catalyst 500 series) and SiH crosslinkers to ensure proper performance.

TEGO® Surten 219 E surfactant is 100% active Gemini wetting agent technology for use in a wide range of aqueous applications. TEGO® Surten 219 E surfactant shows excellent dynamic surface tension reduction with low foam tendency. TEGO® Surten 219 E surfactant is easy-to handle liquid that contains no added alkylphenol ethoxylates (APEs).

VESTAKEEP® 5000 G is a high-viscosity, unreinforced polyether ether ketone suitable for injection molding and extrusion. It is a semi-crystalline polymer with superior thermal and chemical resistance. Parts made from VESTAKEEP® 5000 G have low flammability and can be processed using standard machines for thermoplastics.