Products in Wire & Cable

ELASTOSIL® R 573/70 A/B is a two-component, electrically conductive HCR silicone rubber for the manufacture of electrically conductive products. This product is an addition-cured electrically conductive HCR silicone rubber that shows a low volume resistivity. This product can be used within a temperature range of -55 °C to +210 °C.

ELASTOSIL® R 573/50 A/B is a two-component, electrically conductive HCR silicone rubber for the manufacture of electrically conductive products. This product is an addition-cured electrically conductive HCR silicone rubber that shows a low volume resistivity. This product can be used within a temperature range of -55 °C to +210 °C.

POWERSIL® 190 MH is a one-component silicone rubber compound that is peroxide-curing and ready to use. It is specifically formulated for high voltage applications. When used to extrude or mold insulators, POWERSIL® 190 MH provides excellent resistance to arcing and tracking. This enhanced resistance helps improve the reliability of electrical systems and reduces power interruptions.

POWERSIL® 730 A/B is a low-viscosity two-component compound known for its excellent processing properties, high tracking and erosion resistance, as well as outstanding mechanical and electrical properties. It is a ready-to-use system that is very easy to process due to its low viscosity. Additionally, it exhibits excellent dielectric properties and high arcing resistance.

HDK® T40 is a standard synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity commonly used in various industrial applications. HDK® T40 finds applications in flexographic printing, gravure printing, industrial wood coatings, inkjet paper, offset printing, and printing inks.

POWERSIL® GEL A/B is a pourable, two-component silicone mixture that cures at room temperature to form a transparent, very soft silicone gel. The resulting vulcanizate exhibits excellent mechanical damping properties, providing effective vibration absorption. Additionally, this gel is non-bleeding, ensuring its stability and integrity over time.

POWERSIL® Paste AP is an opaque to whitish paste with a medium consistency. It exhibits good values for electrical insulation, permittivity, and dielectric strength. Additionally, POWERSIL® Paste AP shows minimal swelling of silicone elastomers it comes in contact with, thanks to the utilization of a special phenyl-silicone oil.

ELASTOSIL® R Plus 4305/80 is a two-component, high-consistency silicone rubber specifically designed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and display good to very good mechanical properties. This fast-curing silicone rubber demonstrates good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.

SEMICOSIL® 911 A/B is a pourable, two-part silicone rubber that cures to a soft silicone gel through addition-curing. It has a 1:1 mixing ratio and demonstrates thixotropic behavior. This product offers rapid heat curing and forms a soft gel during vulcanization. SEMICOSIL® 911 A/B has a low volatile and uncured polymer content. It maintains almost constant properties within a wide temperature range, from -40 °C to +180 °C. Additionally, it boasts a low ion content.

GENIOSIL® GF 56 is an alkoxyvinylsilane. It is a clear, colorless liquid with a distinctive aromatic odor. In the presence of moisture, it undergoes hydrolysis (releasing ethanol) to form silanols, which can further react with each other to generate siloxanes. Acting as a bifunctional molecule, GENIOSIL® GF 56 serves as a molecular bridge between organic and inorganic substrates.

ELASTOSIL® R Plus 4360/60 MH is a two-component, high consistency silicone rubber specifically designed for the manufacture of extruded articles. The vulcanizates produced using this silicone rubber exhibit excellent elasticity (rebound resilience) and demonstrate good tear resistance. In comparison to other platinum curing grades like the ELASTOSIL® R plus 4305 series, ELASTOSIL® R Plus 4360/60 MH showcases improved physical resistance.

POWERSIL® GEL C 670 A/B is a two-component, addition-curing silicone mixture that cures at room temperature to a soft silicone gel. The gel is filled with a special lightweight filler, resulting in low density and compressibility. This unique compressibility makes the material suitable for applications in closed instruments without pressure compensation containers.

HDK® H20 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H20 is used as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics, and other applications. It also serves as a reinforcing filler in elastomers, particularly silicone-elastomers. Additionally, HDK® H20 acts as a free flow additive in the production of powder coatings.

ELASTOSIL® AUX G 800 is a solution of reactive siloxanes and silanes in an organic solvent. The primer composition can be applied to the substrate as-is or diluted. During evaporation of the solvent and on exposure to atmospheric humidity at ambient temperature, a rigid primer film is formed that firmly adheres to the substrate. Application of silicone rubber onto the primed substrate and subsequent vulcanization will then result in a tight bond between the silicone rubber and the substrate.

POWERSIL® GEL FC A/B is a pourable, two-component silicone mixture that cures at room temperature to form a soft silicone gel. This product exhibits a very fast curing behavior, allowing for quick processing times. The resulting vulcanizate is transparent and possesses excellent mechanical damping properties, making it suitable for applications requiring vibration absorption. Furthermore, it is a non-bleeding gel, ensuring its stability and reliability.

GENIOSIL® XL 10 is an alkoxyvinyl silane compound. When exposed to moisture, the silane undergoes hydrolysis, resulting in the release of methanol. This hydrolysis process leads to the formation of silanols, which have the ability to react with each other and form siloxanes. The applications of GENIOSIL® XL 10 include marine and protective coatings, plastic additives, and plastic crosslinking.

GENIOPLAST® Fluid FR is a high-viscosity silicone formulation specifically designed as a polymer additive for polyolefins and other thermoplastic resins. It is composed of a linear silicone fluid with a dissolved silicone resin, resulting in a clear and colorless formulation. The primary application of GENIOPLAST® Fluid FR is in plastic additives.

POWERSIL® 466 LV A/B is a ready-to-use, two-component system of liquid silicone rubber. It offers medium conductivity and exhibits excellent mechanical properties. The material has high elongation at break and low tension set, providing flexibility and resilience. Additionally, it maintains stable electrical properties, making it suitable for various applications.

POWERSIL® 740 Dark Gray A/B is a paste-like, two-component compound with short curing times. It is designed to form vulcanizates with exceptional properties, including high tracking and erosion resistance. The material exhibits excellent mechanical properties, particularly high tear strength, and demonstrates outstanding dielectric behavior.

POWERSIL® 3500 MH is a high-temperature vulcanizing (HTV) silicone rubber, used as an addition-curing one-component compound for the production of press-cured articles. The resulting vulcanized products are resistant to tracking and display good to very good mechanical properties. The compound does not release any peroxide split products during cure or post-cure processes. The curing system is significantly faster compared to peroxide-curing materials; cure time can be reduced by 30-50%, depending on the wall thickness.

ELASTOSIL® 4300 is a one-part, acid-curing silicone sealant with excellent mechanical properties and a high curing rate for the construction of aquariums and industrial applications. This product cures at room temperature under the action of atmospheric moisture to form a permanently flexible silicone rubber.

POWERSIL® 440 MH is a ready-to-use electrically conductive silicone rubber grade suitable for all types of molding applications. It is specifically designed for field grading in cable accessories and other electrically conductive parts. This material provides excellent conductivity and is ideal for applications requiring electrical conductivity.

WACKER SilGel® 613 is a pourable, addition-curing, RTV-2 silicone rubber that undergoes vulcanization at room temperature, resulting in a highly flexible silicone gel. This product offers inherent tack and possesses excellent mechanical damping properties. Furthermore, when used in conjunction with ELASTOSIL® CAT UV, WACKER SilGel® 613 exhibits rapid UV curing at room temperature while maintaining a long pot life.

POWERSIL® 464 A/B is a ready-to-use, two-component system of electrically conductive liquid silicone rubber. It exhibits medium conductivity and possesses good electrical and mechanical properties. It is specifically designed with excellent bonding features on RTV-2 rubber, ensuring stable electrical properties and reliable mechanical performance.

Dynasylan® 6598 is an oligomeric siloxane featuring vinyl, propyl, and ethoxy groups. Developed from Dynasylan® VTMOEO, this colorless and nearly odorless liquid brings enhanced properties. Acting as an excellent silane compatibilizer, it bridges inorganic fillers like kaolin, MDH, and ATH with organic polymers such as EPDM, EVA, and PE. In mineral-filled and peroxide-crosslinked cable systems, Dynasylan® 6598 improves mechanical and electrical attributes, especially in moist conditions. With its high boiling start and flash point, it ensures safety, handling ease, and processing advantages. Furthermore, this product emits significantly less hydrolysis ethanol (VOC) compared to monomeric silanes, addressing environmental considerations.

VESTAKEEP® 4000 GF30 is a glass fiber-reinforced (30%) polyether ether ketone specifically designed for injection molding applications. This semi-crystalline polymer offers superior mechanical, thermal, and chemical resistance, ensuring exceptional performance. Parts manufactured from VESTAKEEP® 4000 GF30 exhibit low flammability, enhancing safety. Compatible with common injection molding machines for thermoplastics, this material simplifies the manufacturing process. Experience the reliability and versatility of VESTAKEEP® 4000 GF30 in your injection molding applications. With its glass fiber reinforcement, it provides enhanced strength and rigidity, while maintaining excellent properties in challenging environments. Choose VESTAKEEP® 4000 GF30 for its superior mechanical performance, thermal stability, chemical resistance, and ease of processing, enabling the production of high-quality injection molded parts.

VESTAKEEP® 4000 FP is an unreinforced, high-viscosity polyether ether ketone fine powder. It can be used as a basic resin or blended with different additives for manufacturing compression molding parts. This semi-crystalline polymer exhibits excellent thermal and chemical resistance. VESTAKEEP® 4000 FP has low flammability.

VESTAKEEP® 4000 CF30 is a polyether ether ketone (PEEK) reinforced with 30% carbon fiber. It is specifically designed for injection molding. This semi-crystalline polymer offers superior mechanical, thermal, and chemical resistance. Parts made from VESTAKEEP® 4000 CF30 have low flammability. It can be processed using standard injection molding machines for thermoplastics.

VESTAMID® L1723 BK 9.7624 is a low-viscosity, plasticized PA12 resin suitable for injection molding. It has been developed specifically for the production of strip clips and cable ties. The parts made from this resin maintain their dimensions in environments with varying humidity levels while possessing high tenacity, a low coefficient of friction, and good chemical resistance.

TROGAMID® myCX eCO is a microcrystalline transparent polyamide used for manufacturing parts in the optical industry, such as lenses, using the injection molding process. It is produced using production technology that maximizes the potential for CO2 emission savings of up to 50%.

Dynasylan® SIVO 214 is an aminofunctional silane composition with enhanced crosslinking activity. It serves as an adhesion promoter, facilitating bonding between inorganic materials (such as glass, metals, fillers) and organic polymers (including thermosets, thermoplastics, elastomers). Additionally, it functions as a surface modifier and supports chemical modification of various substances.

Dynasylan® 1505 is an amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers) and as a surface modifier. This liquid product finds its use in coatings, primers, and industrial additives like foundry resins. Compatible with glass and metal substrates, it's your go-to for various applications, from abrasives manufacturing to pipes and cables. Elevate your materials with Dynasylan® 1505.

VESTAKEEP® 5000 FP is an unreinforced, high-viscosity polyether ether ketone fine powder. This versatile material can be used as a basic resin or in blends with different additives for manufacturing compression molding parts. The semi-crystalline polymer offers superior thermal and chemical resistance, making it suitable for demanding applications. VESTAKEEP® 5000 FP exhibits low flammability, ensuring enhanced safety. It is supplied as a powder in 10 kg boxes with moisture-proof polyethylene liners, providing convenient and reliable storage. Choose VESTAKEEP® 5000 FP for its exceptional properties and versatility in manufacturing compression molding parts. Experience the reliability and performance of this high-viscosity powder in your specific applications.

Dynasylan® MEMO is a revolutionary solution for enhancing polymer and resin performance. As a versatile surface modifier and coupling agent, it excels in various applications. This product boasts exceptional chemical resistance, improving filler dispersion and mechanical properties in plastics and elastomers. With features like acid and alkali resistance, low viscosity, and good wet adhesion strength, Dynasylan® MEMO transforms materials into high-performance wonders. Experience its benefits in cables, pipes, and more.

Dynasylan® 1122 is a secondary aminofunctional ethoxysilane, characterized by two symmetric silicone atoms. It functions as an adhesion promoter between inorganic materials (such as glass, metals, fillers) and organic polymers (including thermosets, thermoplastics, elastomers). In addition to its role as a surface modifier, Dynasylan® 1122 can be employed for the chemical modification of various substances.

Dynasylan® 1124 is a secondary aminofunctional methoxysilane with symmetric silicon atoms, serves as an adhesion promoter between inorganic materials (like glass, metals, fillers) and organic polymers (thermosets, thermoplastics, elastomers). This versatile compound also functions as a surface modifier and enables chemical substance modification. Available as a colorless to yellow liquid with an amine-like odor, Dynasylan® 1124 readily dissolves in alcohols, aliphatic, or aromatic hydrocarbons.