Products in Industrial: Silicones

XIAMETER(TM) PMX-200 Silicone Fluid 600,000 cSt is a high-viscosity polydimethylsiloxane polymer that is primarily used for foam control in nonaqueous processes. In petroleum processing, it provides effective foam control at extremely low dosage levels. This product is also suitable for use in personal care applications. The high-molecular-weight dimethicone provides easy combing and detangling for wet or dry hair and adds softness, smoothness, and gloss.

XIAMETER(TM) PMX-200 Silicone Fluid 500,000 cSt is a high-viscosity polydimethylsiloxane polymer that is primarily used for foam control in nonaqueous processes. In petroleum processing, it provides effective foam control at extremely low dosage levels. This product is also suitable for use in personal care applications. The high-molecular-weight dimethicone provides easy combing and detangling for wet or dry hair and adds softness, smoothness, and gloss.

XIAMETER(TM) PMX-200 Silicone Fluid 20cSt is a polydimethylsiloxane fluid commonly used as a base fluid in personal care products due to its excellent spreading characteristics. It is clear, tasteless, essentially odorless, and non-greasy. Commercial bulk-polymerized dimethyl silicone fluids, such as XIAMETER(TM) PMX-200 Silicone Fluid 20cSt, typically contain trace amounts of impurities.

SILFOAM® SD 670 is an anhydrous antifoam agent based on organofunctional silicone fluids, which exhibit high compatibility with organic systems. SILFOAM® SD 670 is a self-dispersing product that spontaneously forms a fine dispersion when added to water. It is recommended for all organic systems that require a highly compatible antifoam agent.

ELASTOSIL® 7750 N is a one-component, neutral-curing, low-modulus silicone sealant with outstanding adhesion, a long shelf life, and excellent tooling characteristics for construction, glass, and window building, as well as industrial applications. ELASTOSIL® 7750 N cures at room temperature in the presence of atmospheric moisture to give a permanently flexible silicone rubber.

SILFOAM® SD 882 is an anhydrous, low viscosity antifoam agent that has the ability to form a fine dispersion when introduced to water or highly polar systems. Its degree of organomodification allows it to effectively control negative effects such as surface defects and separation tendencies.

ELASTOSIL® LR 3846/20 A/B is a considerable oil-bleeding, liquid silicone rubber of the ELASTOSIL® LR 3846 series. It is a paste-like, readily pigmentable, two-component product with a short curing time. Shortly after the curing process, a slight, thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque, have good mechanical and electrical properties, and have very low compression sets.

ELASTOSIL® E14 Red is a non-sag acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent primerless adhesion to many substrates and outstanding heat stability even in long-term exposure. It meets the physical requirements of MIL-A-46106, Group I, Type I, and Group III, Type I.

WACKER® 440 - Glazing and Perimeter is a high-quality silicone sealant specifically designed for various applications such as construction, glass and window building, and industrial use. This one-component, neutral-curing sealant offers outstanding adhesion, a long shelf life, and excellent tooling characteristics. When exposed to atmospheric moisture at room temperature, WACKER® 440 - Glazing and Perimeter undergoes curing and transforms into a permanently flexible silicone rubber.

ELASTOSIL® LR 3004/40 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3004 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® LR 3842/40 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® SOLAR 1109 White is a solvent-free and non-corrosive, one-part silicone adhesive that does not slump. Upon exposure to air moisture, ELASTOSIL® SOLAR 1109 White cures at room temperature, resulting in a permanently flexible silicone rubber with excellent mechanical properties. When fully cured, it exhibits long-term stability against weathering, moisture, and UV radiation. This silicone elastomer can withstand continuously changing climatic conditions, UV radiation, and temperatures as high as 180 °C (356 °F) without sustaining any damage.

ELASTOSIL® LR 3844/50 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

SILFOAM® SC 120 is an anhydrous antifoam compound known for its low viscosity, making it easier to handle compared to high-viscosity alternatives. It demonstrates exceptional resistance to alkaline environments, showcasing its versatility in various applications. The excellent alkali resistance of SILFOAM® SC 120 further enhances its suitability for a wide range of uses.

WACKER® L 067 is a superspreading surfactant based on trisiloxane technology. Due to its unique structure, WACKER® L 067 exhibits high surface activity, allowing it to effectively wet and spread on almost any hydrophobic surface. It has versatile applications, including use as a tank-side adjuvant to improve spray coverage and uptake, or to reduce spray volume. It can also serve as an adjuvant in agrochemical formulations.

ELASTOSIL® LR 3001/55 FR A/B is a paste-like, low-inflammable, two-component compound of liquid silicone rubber. The excellent flame retardancy is confirmed by the achieved UL94-V0 listings at 0.75 mm and 3 mm thickness and f1 rating according to UL746C: Unterwriters Laboratories File E75704 (Wacker Chemie AG). It exhibits good heat resistance, high oil resistance, and short curing times, which are further benefits of this material.

ELASTOSIL® LR 3004/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3004 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

WACKER® AK 200 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 200.000 mm²/s. It is enhanced with a special heat stabilizer that safeguards the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 200 000 STAB is particularly well-suited for applications that entail high temperatures and/or shear stress. It exhibits long-term heat stability, making it suitable for operating temperatures exceeding 150 °C, and it demonstrates high shear stability.

ELASTOSIL® R 427/30 is a high-strength silicone rubber known for its outstanding transparency, excellent tear strength, and exceptional mechanical properties. It is particularly suitable for the production of extruded profiles. The vulcanizing characteristics of this product allow for short cycle times in the manufacturing of molded articles through compression, transfer, and injection molding processes. Post-cured vulcanizates of this product can be utilized in various applications within the healthcare and food handling industries.

ELASTOSIL® R 863/65 MH is a peroxide-curing silicone rubber known for its exceptional green strength, which greatly improves calendering and extrusion performance. When uncured, the extruded hoses made from this silicone rubber exhibit high dimensional stability and a non-sticky surface. ELASTOSIL® R 863/65 is specifically formulated as a high green-strength peroxide-curing silicone rubber. It is recommended to add heat stabilizers when operating at service temperatures exceeding 180 °C.

ELASTOSIL® N189 Black is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. It exhibits excellent primerless adhesion to many substrates and has good resistance to mineral oil and coolants. Additionally, it shows excellent heat stability.

WACKER® Crosslinker V 72 US is an emulsified hydrogenpolysiloxane that contains reactive Si-H groups. This product is specifically designed for addition-curing coating applications in the production of release, baking, and hygiene papers. It offers extremely fast curing, significantly low platinum consumption, and facilitates easy mixing and metering.

DEHESIVE® 908 is a solventless, addition-curing silicone fluid designed for release applications on both paper and filmic substrates. It is an essential component of a multicomponent release coating used in the manufacturing of paper and filmic release liners. These liners play a crucial role in the production of single- and double-sided industrial laminates.

ELASTOSIL N199 TRANSPARENT is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. ELASTOSIL® N199 Transparent exhibits excellent primerless adhesion to many substrates with high tear strength. It is a multipurpose adhesive and sealant for the electronics industry, with typical uses for CIPG- and FIPG-applications.

WACKER® AK 100 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 100,000 mm²/s. It is formulated with a special heat stabilizer that safeguards the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 100 000 STAB is particularly well-suited for applications involving high temperatures and/or shear stress. It is a non-polar liquid with a low solidification point and exhibits good dielectric properties.

ELASTOSIL® N10 Transparent is a solvent-free, neutral-cure, low-viscous, and non-thixotropic silicone sealant that cures at room temperature under the influence of atmospheric moisture. It exhibits excellent primerless adhesion to many substrates. It is a multipurpose grade for bonding, sealing, and potting, e.g. in electronic applications.

ELASTOSIL® RT 713 is a non-slump, addition-crosslinking, thermal-curing, one-component silicone rubber. It is a ready-to-use, one-part system that offers rapid heat cure. With its low density and low hardness, it provides high compressibility. It is also known for its primerless adhesion to many substrates, making it suitable for general-purpose sealant applications, as well as FIPG and CIPG applications.

ELASTOSIL® LR 3005/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® LR 3856/20 A/B is a high-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3856 series. It is a paste-like, easily pigmentable, two-component product with short curing times and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.

WACKER® AK 300 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 300000 mm²/s. It is formulated with a special heat stabilizer that provides protection against thermal decomposition and viscosity changes. This unique feature makes WACKER® AK 300 000 STAB highly suitable for applications subjected to high temperatures and/or shear stress. The heat stabilizer ensures the stability and integrity of the silicone fluid, allowing it to maintain its desired properties under challenging conditions.

ELASTOSIL® LR 3846/30 A/B is a considerable oil-bleeding, liquid silicone rubber of the ELASTOSIL® LR 3846 series. It is a paste-like, readily pigmentable, two-component product with a short curing time. Shortly after the curing process, a slight, thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque, have good mechanical and electrical properties, and have very low compression sets.

ELASTOSIL® N9111 White is a non-slump, non-corossive, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. It is a multipurpose sealant and adhesive for the appliance, automotive, and electronics industries. Due to its shear-thinning nature, ELASTOSIL® N9111 White is easy to apply. The material starts curing upon contact with air humidity.

ELASTOSIL® SC 835 A/B is a two-component silicone rubber that is flowable and addition-curing. It is specifically designed to form a closed cell foam structure. This material is highly compatible with automatic dispensing equipment, making it easy to process. ELASTOSIL® SC 835 A/B is ideal for the production of heat-resistant foam gaskets in a flat design, particularly for use in CIPG (Cured-in-Place Gasket) applications.

SILFOAM® SRE is a versatile antifoam that contains 20% active ingredients and 33% solids. It is relatively rich in emulsifier but has a low viscosity, making it easy to measure accurately. SILFOAM® SRE also demonstrates high resistance to alkalis and acids, allowing for its application in a wide range of pH-sensitive scenarios.

ELASTOSIL® R 427/70 is a high-strength silicone rubber known for its outstanding transparency, excellent tear strength, and exceptional mechanical properties. It is particularly suitable for the production of extruded profiles. The vulcanizing characteristics of this product allow for short cycle times in the manufacturing of molded articles through compression, transfer, and injection molding processes. Post-cured vulcanizates of this product can be utilized in various applications within the healthcare and food handling industries.

ELASTOSIL® N291 is a free-flowing, ready-to-use silicone rubber that can be vulcanized at room temperature or at high temperatures when exposed to atmospheric moisture. It is specifically designed for printing sealing patterns on various substrates, such as steel or cylinder head gaskets containing or free of sulfur. This can be achieved using silk-screen printing techniques.