Products in Industrial: Abrasion Resistant

XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts XIAMETER(TM) PMX- 200 Silicone Fluid 100 cSt and 1 part XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt) to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

Braskem America UTEC® 6541 is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

Braskem America UTEC® 6540 is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

Braskem America UTEC® 6540G is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

VERSALINK® P 1000 is a liquid oligomeric diamine curative that remains in liquid form at room temperature. It is easily mixed, cast, and cured at ambient temperatures. This product serves as a curative for different diisocyanates and their prepolymers. Additionally, it can be utilized as a modifier for amine or anhydride-cured epoxies, enhancing their flexibility.

VESTAKEEP® 5000 G is a high-viscosity, unreinforced polyether ether ketone suitable for injection molding and extrusion. It is a semi-crystalline polymer with superior thermal and chemical resistance. Parts made from VESTAKEEP® 5000 G have low flammability and can be processed using standard machines for thermoplastics.

VESTAMID® NRG 5901 BK is a high-molecular-weight PA-12 material developed by Evonik. This exceptional material offers superior performance characteristics, making it an ideal choice for expanding the use of thermoplastic piping systems. With its ability to handle higher operating pressures and larger diameters, VESTAMID® NRG 5901 BK provides a safe and cost-effective alternative to metallic piping systems. In addition to extending the operating pressure limits of thermoplastic piping systems, it offers numerous benefits and, in many cases, outperforms conventional PE piping systems. Experience the reliability, durability, and enhanced performance of VESTAMID® NRG 5901 BK in your piping applications. Choose VESTAMID® NRG 5901 BK for its superior properties and cost-effective solution, ensuring the safe and efficient operation of your thermoplastic piping systems.

VERSALINK® P 2000 is an oligomeric diamine that is in the form of a waxy solid at room temperature. It serves as a curative for different diisocyanates and their prepolymers. Additionally, it can be utilized as a modifier for amine- or anhydride-cured epoxies to improve flexibility. Moreover, when blended with other VERSALINK® oligomeric diamines, it can achieve a liquid state at room temperature.

VESTAKEEP® 4000 CF30 is a polyether ether ketone (PEEK) reinforced with 30% carbon fiber. It is specifically designed for injection molding. This semi-crystalline polymer offers superior mechanical, thermal, and chemical resistance. Parts made from VESTAKEEP® 4000 CF30 have low flammability. It can be processed using standard injection molding machines for thermoplastics.

VESTAKEEP® 4000 GF30 is a glass fiber-reinforced (30%) polyether ether ketone specifically designed for injection molding applications. This semi-crystalline polymer offers superior mechanical, thermal, and chemical resistance, ensuring exceptional performance. Parts manufactured from VESTAKEEP® 4000 GF30 exhibit low flammability, enhancing safety. Compatible with common injection molding machines for thermoplastics, this material simplifies the manufacturing process. Experience the reliability and versatility of VESTAKEEP® 4000 GF30 in your injection molding applications. With its glass fiber reinforcement, it provides enhanced strength and rigidity, while maintaining excellent properties in challenging environments. Choose VESTAKEEP® 4000 GF30 for its superior mechanical performance, thermal stability, chemical resistance, and ease of processing, enabling the production of high-quality injection molded parts.

Dynasylan® VTMO is a bifunctional organosilane, combines a reactive vinyl group and a hydrolyzable inorganic trimethoxysilyl group. Its versatile reactivity enables chemical bonding to both inorganic materials (e.g., glass, metals, fillers) and organic polymers (such as thermosets, thermoplastics, elastomers). Functioning as a crosslinking agent, adhesion promoter, and surface modifier, Dynasylan® VTMO offers diverse applications.

TROGAMID® CX7323 NC is a specialized polyamide designed for injection molding applications. This microcrystalline transparent polyamide exhibits exceptional transparency to the human eye due to its extremely small crystallite size, which prevents the scattering of visible light. The material's crystalline structure also imparts outstanding crack resistance, ensuring durability and reliability in various manufacturing processes. TROGAMID® CX7323 is conveniently supplied as spherical pellets, packaged in polyethylene. This product allows for a certain degree of flexibility in molds and processing, enabling adjustments to accommodate specific cavity requirements or optimize the overall manufacturing process. With its unique properties, TROGAMID® CX7323 offers a reliable solution for the production of transparent parts through injection molding.

VERSALINK® P 250 is an oligomeric diamine curative that exists as a waxy solid at room temperature. It can be easily mixed, cast, and cured at ambient temperatures. This product serves as a curative for different diisocyanates and their prepolymers. Furthermore, it can function as a modifier for amine or anhydride-cured epoxies, enhancing their flexibility.

VERSALINK® P 650 is a liquid oligomeric diamine curative that remains in liquid form at room temperature. It can be easily mixed, cast, and cured at ambient temperatures. This product serves as a curative for different diisocyanates and their prepolymers. Additionally, it can be used as a modifier for amine or anhydride-cured epoxies, enhancing their flexibility.

Ketron® CM CA30 Polyetheretherketone PEEK, a compression-molded, 30% carbon fiber-reinforced grade that offers exceptional impact, corrosion, chemical, and wear resistance. This black-colored material is designed for applications where high strength, stiffness, and thermal conductivity are needed. Features: 30% carbon fiber reinforced for added strength and stiffness Outstanding impact, corrosion, chemical, and wear resistance Reduced thermal expansion for improved performance High thermal conductivity for rapid heat dissipation Suitable for large parts and bearing applications Benefits: Extends the life of components by resisting wear and corrosion Improves pressure-velocity capabilities and bearing life by dissipating heat faster Provides 3.5 times higher thermal conductivity compared to unreinforced PEEK Offers even higher stiffness, mechanical strength, and creep resistance than Ketron GF30 PEEK Applications: Bearing applications Large parts Automotive industry Aerospace industry Medical industry Industrial machinery Chemical processing Ketron® CM CA30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your bearing applications, need a strong and stiff material for large parts or are in the automotive, aerospace, medical, industrial machinery or chemical processing industries, Ketron® CM CA30 PEEK is the ideal solution.

Ketron® CA30 Polyetheretherketone PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance that Ketron® GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications.

Ketron® Sterra™ CA30 PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance than Ketron GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® Sterra™ CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

TIVAR® Sterra™ UHMW-PE shapes are produced from reprocessed industrial UHMW materials and repurposed for use in a variety of industries, such as construction and heavy equipment, agriculture and grain handling, bulk material and parcel handling, automotive, and transportation. As a premium grade that is both economical and eco-friendly, TIVAR® Sterra™ UHMW-PE components exhibit excellent abrasion and corrosion resistance, outstanding impact strength, minimal moisture absorption, and a low coefficient of friction. For these reasons, TIVAR® Sterra™ UHMW-PE is often a favored solution for wear and outrigger pads, strips, rails, and guides, rollers, conveyors, chutes, hoppers, impact plates, and asphalt equipment components. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Ketron® CM 1030HT Polyetherketone PEEK, a carbon filled material that provides added stiffness at high temperatures. With excellent dimensional stability, chemical and corrosion resistance, this material is ideal for a variety of applications that require strength, stiffness and stability at high temperatures. Features: Carbon filled for added strength and stiffness Provides added stiffness at high temperatures Good dimensional stability Excellent chemical and corrosion resistance Benefits: Improved strength and stiffness at high temperatures Suitable for high temperature applications Good dimensional stability ensures consistent and accurate performance Excellent chemical and corrosion resistance ensures long-lasting performance in harsh environments. Applications: Aerospace industry Automotive industry Medical industry Industrial machinery High-temperature applications Ketron® CM 1030HT PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your aerospace, automotive, medical, industrial machinery or high-temperature applications, Ketron® CM 1030HT PEEK is the ideal solution.

TIVAR® Sterra™ DrySlide UHMW-PE is an internally lubricated product. This lubricant is built into the PE-UHMW matrix with a higher molecular weight. It offers a lower coefficient of friction and enhanced wear and abrasion resistance than TIVAR® 1000 PE-UHMW. The additives used also make this material static dissipative and considerably improves UV-resistance. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

TIVAR® Sterra™ ESD UHMW-PE are electrostatic dissipative shapes produced from reprocessed industrial UHMW materials and repurposed for use in a variety of industries, such as agriculture and grain handling, bulk material handling, and parcel handling. As a premium grade that is both economical and eco-friendly, TIVAR® Sterra™ ESD UHMW-PE components exhibit excellent abrasion and corrosion resistance, outstanding impact strength, minimal moisture absorption, and a low coefficient of friction. For these reasons, TIVAR® Sterra™ ESD UHMW-PE is often a favored solution for conveyor, chute, and hopper applications, where electrical charge build-ups are prevalent. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Ertalyte® is a high-performance polyethylene terephthalate polyester (PET) produced by Mitsubishi Chemical Advanced Materials. With its exceptional wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, Ertalyte® is the ideal material for applications that require sustained high loads and high-temperature performance.Features:Excellent wear resistanceLow coefficient of frictionHigh strength and toughnessResistant to moderately acidic solutionsRetains more of its original strength up to 180° F / 85° C than nylons or acetalsBenefits:Capable of sustaining high loadsIdeal for applications requiring high-temperature performanceExtends the service life of componentsLow maintenance and repair costsSuitable for use in harsh environmentsApplications:PharmaceuticalFood processing and packagingOil and gasBearings and structural applicationsAny application requiring high load and high-temperature performance.

Aegis® H100ZP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. The resin product complies with all food contact regulations. Aegis® H100ZP homopolymer combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance.

Aegis® PIR-H35ZI resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H35ZI, its standard, non-recycled counterpart.Aegis® PIR-H35ZI resin is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. Aegis® PIR-H35ZI homopolymer exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® H8202NL resin is a 2.6 RV, unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It combines good strength, stiffness and toughness with excellent heat, chemical and abrasion resistance.

Aegis® PIR-H8202NLB resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H8202NLB, its standard, non-recycled counterpart.Aegis® PIR-H8202NLB resin is an unfilled, low/medium viscosity, non-lubricated, nylon 6 homopolymer. It exhibits good strength, stiffness, and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® H85WC01 resin is a medium-high viscosity, heat stabilized, nylon 6 jacket compound for use in wire, cable, flexible lighting and plenum applications. It provides excellent performance across the range of THHN, THWN and TFFN constructions along with a well-balanced set of properties, including low fuming, high toughness, abrasion resistance, and excellent resistance to gasoline, oil and other hydrocarbons.

Aegis® H8202NLB is an unfilled, low/medium viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt fluidity for filling thin sections. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® H85QP is a lubricated, medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film. It combines strength, toughness and strong thermoforming properties with excellent heat, chemical and abrasion resistance.

Aegis® H100NP resin is a medium-viscosity nylon 6 extrusion grade homopolymer for cast or blown film. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.

Aegis® H35ZI is an unfilled, low viscosity, non-lubricated nylon 6 injection molding homopolymer exhibiting excellent melt flow properties for filling thin sections and reduced cycle times. It exhibits good strength, stiffness and toughness as well as excellent heat, chemical and abrasion resistance.

Aegis® PIR-H85NP resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H85NP, its standard, non-recycled counterpart.Aegis® PIR-H85NP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown BOPA film. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.

Aegis® H85NP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown BOPA film. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.

Aegis® H135ZP resin is a high-viscosity nylon 6 extrusion grade homopolymer for cast or blown film applications. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.

Aegis® H55WCX resin is a medium-viscosity, heat stabilized, nylon 6 universal wire jacket compound that provides excellent performance across a range of THHN, THWN and TFFN constructions. It offers well-balanced features including flexibility, toughness, abrasion resistance, and superior resistance to gasoline, oil and other hydrocarbons.

ACCESS® SF 30,000 cSt Silicone Fluid is a high-performance silicone fluid with a viscosity of 30,000 cSt. This fluid is ideal for use in high-temperature environments where traditional lubricants would break down. It offers excellent lubrication and insulation properties, making it suitable for use in a wide range of industrial and automotive applications. It also provides excellent resistance to oxidation and degradation, making it ideal for long-term use in harsh conditions.