Products in CASE Ingredients: Enamel

Hydropalat® WE 3650 is a low-foaming wetting agent with key benefits including highly effective wetting for water-based coatings and ink applications, excellent dynamic surface tension reduction in combination with low foam stabilization, and suitability for lacquers or inks experiencing substrate wetting or cratering issues. Due to its excellent wetting properties, the product can also positively affect ink transfer and adhesion.

Dispex® Ultra FA 4483 is an excellent dispersing agent for inorganic pigments. In clear, viscous liquid form, Dispex® Ultra FA 4483 is well-suited for dispersing inorganic pigments like iron oxide, titanium dioxide, calcium sulfate (gypsum), etc.

Efka® SI 2022 is a silicone-based defoamer suitable for both solvent-based and solvent-free coatings. It prevents the formation of foam and blisters during manufacturing and application. It is recommended for two-pack systems based on polyurethane and epoxy resins, especially suited for polyurethane-based curtain coating finishes, and baking enamels based on alkyd resins or saturated polyesters.

Efka® SL 3236 functions as a slip and leveling agent, being an organically modified polysiloxane soluble in various solvents. It improves general surface characteristics and is recommended for non-aqueous coatings like baking enamels, acid-curable or polyurethane wood finishes.

Efka® FL 3600 is a flow and leveling agent that offers a strong reduction of surface tension, good compatibility, and effective anti-cratering properties. In slightly yellowish liquid form, Efka® FL 3600 enhances the flow and leveling characteristics of coatings.

Dianhydrides & Imides BISDA (4,4-bisphenol A dianhydride, dianhydrides of BPA) are flakes that can serve as a comonomer in polyimide synthesis or as an anhydride curing agent in epoxy applications. When utilized as an epoxy curative, it can enhance thermal performance compared to monoanhydrides and aromatic amine curing agents. Its application areas include electronics encapsulation, composites, and adhesives. Dianhydrides & Imides BISDA-derived polyimide varnishes, coatings, adhesives, films, and wire enamels offer desired solubility and stability in organic solvents even after complete imidization, heat resistance, flexibility/softness, dimensional stability, and adhesion properties for the ever-increasing design complexity of electronic devices. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

AFCONA 3750 is a silicone-based leveling and anti-crater agent for aqueous coatings that does not impact inter-coating adhesion. It is a highly fluorocarbon-modified acrylic polymer with very low surface tension, allowing it to substitute and perform as silicones without the side effects of silicones.

TYTAN™ TET is a titanium chelate of triethanolamine and isopropyl alcohol complexes. TYTAN™ TET is a water-soluble titanate that can be used in a variety of applications, e.g., as a cross-linking agent in aqueous and non-aqueous paint, wire enamel, and as an adhesion promoter in polyurethane systems.

AFCONA 3770 is a leveling agent with good defoaming effect and anti-crater working for solvent-based coatings. Fluorocarbon modified acrylic polymer. AFCONA 3770 is a fluorocarbon modified acrylic polymer. Besides acting as an effective leveling agent, it also gives a strong defoaming effect as well as anti-crater properties.

AFCONA 2023 is a moderate defoamer with minimal side effects. It prevents the formation of foam and blisters during the manufacturing and application of solvent-based coatings. The product has a moderate defoaming property and does not show many of the obvious side effects seen when using some stronger defoamers.

DCL 1419 Quinacridone Violet, PV.19 is a bright, blue-shaded quinacridone with a similar shade to thioindigo red, and it has excellent overall properties. This pigment is FDA-approved (Section 178.3297) and is recommended for use in inks, high-grade industrial paints, implement enamels, agricultural equipment, and powder coating applications.

DCL 2912 Naphthol Red, PR.112 is a brilliant yellow shade of naphthol AS pigment with excellent masstone weather fastness. This product is suited for interior architectural, low-cost industrial exterior, air-drying, and baking enamel coatings and has better solvent fastness than PR.3 (toluidine red), making it suitable for more demanding applications.

AFCONA 3779 is a leveling agent for solvent-based coatings. It is a pure polyacrylic leveling agent. Polyacrylics are well known for flow and leveling performance. AFCONA 3779 also acts as defoamer in most coating systems. It provides anti-flooding and floating properties, works as a defoamer and deareator.

AFCONA 3280 is a special modified polysiloxane that is soluble in aliphatic and aromatic hydrocarbons, esters and ketones, but insoluble in water. It offers slip, defoaming, and improvement of surface characteristics without hurting intercoat adhesion. Additionally, it offers better hot water resistance than other polyether modified polysiloxanes.

AFCONA 3700 is a wetting, leveling and flow control agent for solvent-free and solvent-based coatings with excellent anti-crater properties. AFCONA 3700 is a highly fluorocarbon modified polyacrylic polymer. It has very low surface tension and therefore it can substitute and perform as silicones without the side effects of silicones.

AFCONA 3778 is a leveling agent for solvent-based and solvent-free coatings. It is a pure polyacrylic leveling agent. Polyacrylics are well known for flow and leveling performance. AFCONA 3778 also acts as a defoamer and deareator in most coating systems. It does not interfere with intercoat adhesion.

AFCONA 3758 is a leveling and flow control agent for solvent-based coatings with anti-crater properties. AFCONA 3758 is a special modified polyacrylic polymer. It reduces drastically surface tension of organic coating systems. This, together with good compatibility in most solvent-based systems and with minimal foam stabilizing effect, makes it very effective as an anti-crater and flow control agent for all solvent-based coatings.

AFCONA 5010 is tailor made as an effective dispersant for TiO2 and extenders. It helps to wet and disperse inorganic pigments making it an effective dispersant for TiO2. However, if a white base will be tinted with other colors later, AFCONA 4010 would be a better choice.

Pangel B20 is a powdered additive with a high thickening and anti-settling capacity for intermediate polarity systems, particularly recommended for systems based on aromatic and unsaturated polyester type solvents. It provides thixotropic, suspension and sagging-resistance properties to systems based on aromatic and unsaturated polyester type solvents, Pangel B20 does not require the use of a polar activator for its dispersion.

Pangel B10 is a powdered additive with a high thickening and anti-settling capacity for intermediate-low polarity systems, particularly recommended for systems based on white spirit type solvents. The dispersion process of Pangel B10 is similar to that of other solid components of the formulation, being necessary to ensure appropriate product wetting and the application of sufficient mechanical energy (shear). Equipment such as cowles, dissolvers, silverson types, colloidal mills, horizontal, vertical, and basket grinding equipment are enough to obtain a good dispersion.

Deuteron® OG 330 is a remarkable enhancer known for significantly improving slip, abrasion, and rub resistance in aqueous coatings and inks. Its low viscosity and dust-free delivery form make it easily manageable in paint manufacturing processes. With a concentration of approximately 46%, it's designed to optimize cost-effectiveness while delivering enhanced properties to coatings and inks.

Crestakyd® 41-6010 is a universally employed resin in primers, enamels and hammer finishes. It is suitable for air dry, low bake and general purpose stoving industrial paints. The resin is compatible with urea and melamine formaldehyde resins and is therefore suitable for stoving finishes.

Crestakyd® 20-5029 is a rapid drying alkyd that has excellent gloss / weathering resistance and flow characteristics. This chain stopped, medium oil air drying alkyd is an essential paint and coating component, offering excellent durability, good flow and leveling properties. It can specifically be used for primers, general air dry industrial finishes and machinery enamels.

Crestakyd® 20-9021 is a rapid drying alkyd that has excellent gloss / weathering resistance and flow characteristics. This medium oil air drying component is an economical chain stopped alkyd used for fast drying machinery enamels, primers and other air-dry industrial finishes.

Crestakyd® 30-5071 exhibits rapid drying characteristics and fast hardness development. It has very good weather resistance, excellent film build and attractive gloss. It can be used for NC finishes, acid hardening finishes and in combination with low reactivity melamine resins for industrial stoving enamels and automotive finishes.

Crestakyd® 20-5036 is a chain stopped alkyd with excellent drying, gloss and weathering properties. This chain stopped, medium oil is an essential paint and coating component, offering excellent durability, good flow and leveling properties. It can specifically be used for primers, general air dry industrial finishes and machinery enamels.

Crestakyd® 41-5009 is a styrene-modified alkyd based upon a blend of mixed non-yellowing oils and supplied as a solution in xylene. It is a very versatile resin that gives paints with high gloss and good resistance properties. It is also used in the marine industry for quick drying coatings.

Crestakyd® 30-5016 is a chain stopped alkyd for rapid air drying industrial paints and low bake enamels with excellent resistance to oils, greases and water. It is suitable for use in vehicle and machinery finishes, can be air-dried, force-dried or stoved. Air drying finishes are tack free in 30 minutes with good through drying properties. Crestakyd® 30-5016 has excellent resistance to oils, greases and water.

Crestakyd® 10-3000 is an air drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. It is used for interior and exterior decorative enamels, marine and topside paints. Also suitable for undercoats, maintenance primers and floor varnishes.