Products results

Ti-Pure™ R-900 is a rutile titanium dioxide (TiO2) pigment with a simplified surface design that opens an extended range of performance options. This product provides high brightness and excellent hiding in a wide variety of gloss applications. It has a multifaceted product design for non-durable, demanding applications, and it is an ideal choice for corrosion resistance coatings.

ASCOTRAN® H10 is a ready-to-use, liquid-form, anti flash-rust additive for waterborne coatings and galvanized steel substrates. It replaces mineral anticorrosive pigments and enhances their effectiveness. This product functions as a hydrophobic agent and increases the water resistance of dry films. It helps shield against corrosion in metal packaging.

ASCOTRAN® AL4 is a ready-to-use, VOC-free, liquid-form, anti flash-rust additive for any waterborne coating. It contains a hydrophobic agent that protects nearly dry films under severe ambient humidity conditions. Additionally, this product acts as a corrosion inhibitor for metal packaging protection.

Pangel B20 is a powdered additive with a high thickening and anti-settling capacity for intermediate polarity systems, particularly recommended for systems based on aromatic and unsaturated polyester type solvents. It provides thixotropic, suspension and sagging-resistance properties to systems based on aromatic and unsaturated polyester type solvents, Pangel B20 does not require the use of a polar activator for its dispersion.

Pangel W is an organically modified sepiolite in powder form used to improve the anti-sagging properties of aqueous systems as well as its anti-sedimentation performance during storage. This thickener is manufactured through organic modification of rheological sepiolite, mainly for aqueous systems. It improves rheological characteristics in the range of shear forces affecting sagging and sedimentation properties while controlling consistency.

Pangel OMD1 is a self-dispersing rheological additive for medium- to low-polarity systems. It is based on a highly purified bentonite clay and is recommended for both aliphatic solvents and mineral or synthetic oils. This product is an easy-to-disperse, self-activated organobentonite.

ACCESS® SRE Emulsion based on siloxanes with a concentration of 30%. Which is a defoamer for paints and primers.

AFCONA 2048 is a defoamer for both spray and brush applications of solvent-based wood coatings. It is especially suited for high gloss solvent-based wood finishes and is highly compatible, not causing unacceptable haze. It is particularly useful for brush applications, as it quickly evaporates and provides rapid defoaming.

Pangel OM4 is a rheological additive for intermediate to low-polarity systems, based on a highly purified bentonite clay. Pangel OM4 shows particularly good performance in aliphatic and aromatic solvents. Pangel OM4 is recommended for both aliphatic solvents and mineral or synthetic oils.

AFCONA 6960 is a micronized PTFE wax for all types of paint, ink and plastic surface modifiers. It gives better transparency to wet paint and final coating comparing to other PTFE waxes that are available in the market. It also provides anti-blocking and anti-scratch properties.

DeMUL 229 is a nonionic emulsifier, improving shear, temperature and electrolyte stability of polymer dispersions. DeMUL 229 can also be used during the premixing phase in the production of waterborne emulsion paints, acting as a process aid and reducing grind time by faster deagglomeration of TiO2 and fillers.

Minex® ST 4 A100-10 is a functional filler that is produced from nepheline syenite, a naturally occurring, silica-deficient sodium-potassium alumina silicate. Automated scanning electron microscopy confirms that Minex® ST grades contain less than one-tenth of one percent crystalline silica. No free crystalline silica is detectable in the mineral complex. All Minex® ST grades are processed and sized with rigid adherence to Covia’s QIPSM quality assurance programs.

DeCAL 4030 is a low-cost universal thermoplastic Styrene/Acrylic copolymer in emulsion form that offers excellent binding power, adhesion, and gloss. DeCAL 4030 is used in a wide range of applications, including interior and exterior water-based paints, lacquers, adhesives, and flexible fillers.

Crestakyd® 10-2505 is a fast drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. This long oil air drying alkyd can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes.

Hauthane HD-2107 DMM (L-2877) is a hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. Features: Forms tough, abrasion- and mar-resistance films. Outstanding water and chemical resistance. Excellent exterior weathering performance. Can be crosslinked to enhance performance. Dilution and clean-up with ordinary tap water. Contains dipropylene glycol dimethyl ether (DMM) co-solvent.

Crestakyd® 30-5068 exhibits rapid drying characteristics and fast hardness development. It has very good weather resistance, excellent film build and attractive gloss. It can be used for NC finishes, acid hardening finishes and in combination with low reactivity melamine resins for industrial stoving enamels and automotive finishes.

Texicryl® 13-013 is a styrene acrylic copolymer emulsion containing a plasticizer. The product gives excellent adhesion on substrates and even at low temperature, the flexibility is good. It is suitable for paints, sealants, acrylics, highly filled putties and soft fillers applications.

Hauthane L-3415 is a VOC-free, water-borne, UV-curable polyurethane dispersion.Features:VOC-free, APEO surfactant free.Excellent chemical and stain resistance.Forms durable, films under ambient or force-dried conditions.Superior abrasion resistance.Fast water-release properties.

Texicryl® S-12 is a styrene acrylic resin soluble in alkalis, developed for water-based coatings and inks. It comes in solid form and enhances the gloss and resolubility of water-based coatings for the graphic arts industry. Optimum pigment grinding is achieved by making resin solutions at 30 - 35% solids content, while clear coatings require maximum solids for the highest achievable film build.

Crestakyd® 30-5067 is a fast drying short oil alkyd supplied in xylene for use in airdry and force-dry primers and topcoats. It is recommended for use in air-dry and force-dry primers and topcoats in a variety of general industrial metal coating applications.

Texicryl® 13-813 is a modified styrene acrylic copolymer designed for use in off-set overprinting varnishes. It has been formulated to give excellent gloss over print and superior holdout over unprinted areas. It may also be used for certain graphic arts applications to non-absorbent substrates.

Crestakyd® 10-1066 is a fast drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. This long oil air drying alkyd can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes.

Texicryl® 17-0376 is a modified styrene acrylic copolymer emulsion designed for use in high performance anticorrosive primers. It has been specifically designed for the formulation of low VOC waterbased anticorrosive primers which provide excellent salt spray (to ASTM B117), humidity and prohesion resistance on clean metal substrates.

Hauthane HD-3810 is an aliphatic, polyurethane topcoat which produces a soft, rubbery feel at low gloss levels. Features: Soft, rubbery/grabby feel. Inherently low gloss without the use of external flatteners. Silicone-free. Can be crosslinked to enhance performance. Forms a film at room temperature. Low VOC: 50 g/l less water.

Crestakyd® 41-6010 is a universally employed resin in primers, enamels and hammer finishes. It is suitable for air dry, low bake and general purpose stoving industrial paints. The resin is compatible with urea and melamine formaldehyde resins and is therefore suitable for stoving finishes.

Crestakyd® 10-1022 is a fast drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. This long oil air drying alkyd can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes.

Crestakyd® 30-5005 is short oil fast drying alkyd resin with high hardness. It is an essential paint and coating component, offering excellent durability, good flow and leveling properties. This short oil air drying alkyd is used in air drying primers and finishes, metal and wood application.

Crestakyd® 30-9502 is a short oil, high solids, chain-stopped alkyd based upon linoleic-rich fatty acids, supplied in a 3:2 w/w blend of xylene / methoxy propanol. The high solids allow this product to be formulated in VOC compliant topcoats (max. 420 g/l) and DTM primers, both displaying excellent salt spray resistance.

Crestakyd® 10-1025 is a fast drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. This long oil air drying alkyd can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes.

Crestakyd® 20-5029 is a rapid drying alkyd that has excellent gloss / weathering resistance and flow characteristics. This chain stopped, medium oil air drying alkyd is an essential paint and coating component, offering excellent durability, good flow and leveling properties. It can specifically be used for primers, general air dry industrial finishes and machinery enamels.

Texicryl® 13-819 is a styrene acrylate based vehicle designed for high gloss heat resistant overprint varnishes. It has been designed for use in hard polymers normally used in the formulating of overprint varnishes, and it can be blended into OPV’s to partially replace the hard polymer and enhance the gloss level. The product is free from APEO based surfactants.

Crestacryl® 71-5060 is a thermoplastic acrylic resin, which gives rapid solvent release, very good elasticity, excellent adhesion on various metallic substrates and very good alkali and water resistance. It can be used for primers, paints for metal and finishes for wood.

Crestakyd® 10-2020 is a fast drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. This long oil air drying alkyd can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes.

Texicryl® 13-809 is a styrene acrylic emulsion polymer designed for high gloss, water-based overprint varnishes and heat resistant inks. This styrene acrylic binder has been designed to provide superb clarity, water resistance, heat resistance, gloss etc. It can be used as deblocking modifier.

Texicryl® S-09 is an alkali-soluble styrene acrylic resin developed for water-based coatings and inks. The resin is supplied in solid form and is designed to impart gloss and resolubility to water-based coatings in the graphic arts market. It is easily dissolved in water at elevated temperatures in the presence of ammonia or other suitable amines. Solutions of the resin must be kept above pH 7 to prevent the resin from reverting back to its solid form.

Crestakyd® 10-1019 is a fast drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. This long oil air drying alkyd can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes.