Products

125-21 is a silver/silver chloride, one component, chemically resistant, medical electrode epoxy ink and coating suitable for application by screen-printing. This product features excellent adhesion to polyimide, polyester, polycarbonate, glass, and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to methyl ethyl ketone (MEK) and acetone as well as many other chemistries. It is also very resistant to scratching and creasing. Some applications for 125-21 include, but are not limited to, polymer thick film circuitry, trans-dermal drug delivery, ECG and EKG electrodes, defibrillator pads, tens electrodes and muscle stimulator electrodes. 125-21 is formulated to be screen-printed but can also be syringe dispensed, dipped and sprayed. The last two methods require dilution.Features Excellent Print Definition High Electrical Conductivity High Temperature Resistance Chemically Resistant Excellent Adhesion Long Screen Life Chemically resistant electrode ink

127-07 is an ink/coating with high electrical conductivity for application by screen-printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, and a variety of other substrates. The superior conductivity of this product allows the end user to print narrower and/or longer circuit trace lines or thinner coatings without compromising overall maximum ohm values. The proper use of this feature can result in a significant cost saving or enhanced performance. This product is more flexible and elastomeric than traditional conductive inks. Some applications for 127-07 include, but are not limited to, RFID antennae, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and membrane switches and it has shown to have conductivity at up to 200% elongation.Features Elastomeric conductive ink

106-12 is a silver/carbon-based electrically conductive ink, coating and adhesive suitable for application by stamping, screen printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass, and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 106-12 include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments and static elimination.Features Standard electrode material for ECG

125-09 is a radio opaque ink/coating for application by screen printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 125-09 include, but are not limited to, manufacturing of medical devices and instrumentsFeatures Very flexible, low temperature curing, ideal for urethane

125-14 is a carbon-based, electrically conductive ink and coating suitable for application by stamping, screen printing, dipping and syringe dispensing. This product has improved thermal stability compared to 111-26 and features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. Unlike conventional conductive materials this product is very resistant to flexing and creasing. Some applications for 125-14 include, but are not limited to printed heaters, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments and static elimination. 125-14 can be blended with CMI's 126-48 (50 Ω/square) in any ratio to obtain in-between electrical conductivity.Features High resistance ink, blend-able with 126-48

114-34A/B119-44 is a two component, solvent-resistant, electrically conductive ink, coating and adhesive suitable for screen-printing circuit lines. This product features excellent adhesion to Kapton, Mylar, glass, polycarbonate and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to methyl ethyl ketone. It is also very resistant to scratching and creasing. Some applications for 114-34/B119-44 include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface mounted devices, bus bars on Indium Tin Oxide sputtered surfaces, and anode coatings for tantalum capacitors. This product is designed for use in crossovers with CMI product 116-20, a UV curable dielectric. 114-34A/B119-44 may be blended with 118-09A/B to provide a wide range of conductivity levels for various applications.Features Low temperature curing two component, epoxy ink. Adheres to ITO

118-08 is a translucent blue, two component, solvent-resistant, electrically insulating ink, coating and adhesive suitable for screen printing. This product features excellent adhesion to Kapton, Mylar, glass, polycarbonate and a variety of other substrates. Unlike conventional dielectric materials, this product is very resistant to methyl ethyl ketone. It is also very resistant to scratching and creasing. Some applications for 118-08 include, but are not limited to, dielectric insulation of thick film circuitry, improving moisture resistance, arc track resistance, and weathering resistance of electrical/electronic devices.Features Blue, flexible epoxy dielectric, adheres to ITO

126-45 is a screen-printable, electrically conductive ink, coating and adhesive suitable for application by stamping, screen printing, dipping and syringe dispensing. This product features excellent adhesion to Kynar, Kapton, Mylar, glass and can also be used on low surface energy coatings such as transparent conductive oxides. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 126-45 include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface mounted devices, and anode coatings for tantalum capacitors. 126-45 is a lower cost version of 120-07.Features Economical conductive ink ideal for urethane & vinyl

113-09 is a silver/silver chloride, medical grade, electrically conductive ink and coating suitable for application by screen printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 113-09 include, but are not limited to, transdermal drug delivery, ECG electrodes, tens electrodes and muscle stimulator electrodes.Features Standard electrode ink for defibrillation and reference electrodes.

128-07 is an ink/coating with high electrical conductivity for application by screen-printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, and a variety of other substrates. The proper use of this feature can result in a significant cost saving or enhanced performance. This product is more flexible and elastomeric than traditional conductive inks. Some applications for 128-07 include, but are not limited to, RFID antennae, polymer thick film circuitry, and membrane switches and it has shown to have conductivity at over 50% elongation. 128-07 is a carbon version of 127-07.Features Elastomeric resistive ink

117-43 is a waterborne, silver/ silver chloride, based electrically conductive ink and coating suitable for application by screen-printing. This product features adhesion to Kapton, Mylar, glass, and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 117-43 include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments, medical electrodes and static elimination. 117-43 is a screen-printable version of 117-42, for use in facilities where V.O.C's are a concern.Features Water-borne electrode ink

126-09 is an electrically conductive ink/coating for application by screen-printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. This product is very resistant to abrasion, scratching, flexing and creasing and is suitable for applications requiring significant flexing cycles with minimal effect on electrical performance. Some applications for 126-09 include, but are not limited to, RFID antennae, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches and coatings for tantalum capacitors.Features Economical conductive ink

127-06 is a carbon filled, screen-printable, electrically conductive, epoxy based ink and coating suitable for application by screen- printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 127-06 include, but are not limited to, printed potentiometers, printed resistors, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches and anode coatings for tantalum capacitors. 127-06 is a 5 kΩ/sq/mil version of 120-24 and features an extended screen life.Features High resistance ink, blend able with 120-24, ideal for strain gages.

118-38(EU) is a waterborne, low V.O.C., electrically conductive ink and coating, suitable for application by screen-printing. This product features adhesion to Kapton, Mylar, glass, and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 118-38(EU) include, but are not limited to, medical electrodes, emi/rfi shielding, polymer thick film circuitry, membrane switches and static elimination. 118-38(EU) is an N-methyl Pyrrolidone free version of 118-38, for use in facilities where V.O.C's are a concern.Features Abrasion resistant, water-based, NMP free

126-33 is an ink/coating with extremely high electrical conductivity for application by screenprinting, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, and a variety of other substrates. The superior conductivity of this product allows the end user to print narrower and/or longer circuit trace lines or thinner coatings without compromising overall maximum ohm values. The proper use of this feature can result in a significant cost saving or enhanced performance. Unlike conventional conductive materials, this product is resistant to aggressive solvents such as MEK and acetone. Some applications for 126-33 include, but are not limited to, RFID antennae, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and membrane switchesFeatures Abrasion resistant extremely conductive ink

127-49A/B is an electrically conductive, two-component, silicone ink and coating suitable for high temperature applications. 127-49A/B is suitable for application via syringe dispensing and screen printing. Unlike typical conductive inks, the high temperature capability of this product makes it useful in a range of unique applications such as extreme performance coatings. 127-49A/B is also able to cure at room temperature.Features Ultra high temperature conductive ink

125-09TS is a radio opaque ink/coating for application by screen printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 125-09TS include, but are not limited to, manufacturing of medical devices and instruments. 125-09TS is a thermosetting version of 125-09T.Features Very abrasion resistant, thermosetting version of 125-09, ideal for urethane

113-09(S) is a silver/silver chloride, medical grade, electrically conductive ink and coating suitable for application by screen printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 113-09(S) include, but are not limited to, transdermal drug delivery, ECG electrodes, tens electrodes and muscle stimulator electrodes. 113-09(S) is a chemically resistant version of 113-09.Features Increased solvent resistant version of 113-09

126-48 is an electrically conductive ink/coating for application by screen-printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 126–48 include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and membrane switches. 126-48 is a higher viscosity version of 112- 48.

125-19FS is a flexible, re-workable, electrically conductive, silicone-based ink. The overall balance of peel strength, cohesion, printability and high temperature holding power provides a versatility that makes this product useful in a wide range of coating, printing, fastening and bonding applications.Features Excellent Bonding to Difficult Surfaces High Temperature Resistance Wide Range of Applications Screen Printable

125-09MDB is a medium durometer, blue, radio opaque ink/coating for application by screen printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 125-09MDB include, but are not limited to, manufacturing of medical devices and instruments.Features Very flexible blue radio opaque ink.

117-23(S) is a medical grade, electrically conductive ink, coating and adhesive suitable for application by stamping, screen printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some uses for 117-23(S) include, but are not limited to, EKG and Tens electrode applications, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, and membrane switches. 117-23(S) is a chemically resistant version of 117-23.Features Increased solvent resistant version of 117-23

118-09A/B119-44 is a two component, solvent-resistant, electrically conductive ink, coating and adhesive suitable for screen-printing circuit lines. This product features excellent adhesion to Kapton, Mylar, glass, polycarbonate and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to methyl ethyl ketone. It is also very resistant to scratching and creasing. Some applications for 118- 09A/B119-44 include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface mounted devices, bus bars on Indium Tin Oxide sputtered surfaces, and anode coatings for tantalum capacitors. This product is designed for use in crossovers with CMI product 116-20, a UV curable dielectric.Features Low temp curing, adheres to ITO

125-19(SP)C is a highly elastomeric, electrically conductive, silicone-based ink. This product features a high performance design useful in a wide range of printing and coating applications and features excellent bonding to most metal and plastic substrates. This product is very resistant to flexing and creasing and is ideal for applications that include, but are not limited to, wearable electronics, high temperature bonding, and stretchable, elastomeric conductors. 125-19(SP)C is one of the few conductive materials that can bond/adhere to silicone substrates and surfaces and features a uniquely long pot life.Features Elastomeric silicone conductive ink, non-flammable

113-09(LPS) is a silver/silver chloride, medical grade, electrically conductive ink and coating suitable for application by screen printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 113-09(LPS) include, but are not limited to, transdermal drug delivery, ECG electrodes, tens electrodes and muscle stimulator electrodes. 113-09(LPS) is a more flexible, solvent resistant version of 113-09.Features More flexible, solvent resistant version of 113-09

126-26(SP) is a two-component, high performance, silicone ink, coating, and adhesive optimized for screen printing. 126-26(SP) features a low viscosity, has a quick cure time at elevated temperatures, and is highly solvent resistant upon cure. 126-26(SP) features excellent adhesion to many substrates including but not limited to Mylar, Kapton, many grades of TPU, and is able to be bonded to many grades of silicones and Teflon. Uses for 126-26(SP) include but are not limited to sealing and environmental protection of electronic components, insulating of conductive circuitry, and potting of stress-sensitive equipment. 126-26(SP) is a long screen life, two component version of 126-26.Features Non-Flammable Silicone dielectric ink and coating

112-47 is a carbon-based, electrically conductive ink, coating and adhesive suitable for application by stamping, screen printing, dipping and syringe dispensing. This product is has better thermal stability than 111-26 and features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 112-47 include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments and static elimination. 112-47 can be blended with CMI's 112-48 (20 Ω/square) and 112-15 (0.010 Ω/square) in any ratio to obtain in-between electrical conductivity.Features Extremely resistant ink. Blend-able with 112-48

121-30 is a carbon / silver filled, electrically conductive ink and coating for application by screen-printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates, including transparent conductive oxide coatings. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 121-30 include, but are not limited to, EMI/RFI shielding of polyimide flexible circuits, polymer thick film circuitry, solar cell and touch screen bus bar applications and back electrodes on electroluminescent devices.Features Carbon/Silver conductive ink

113-15 is a radio opaque ink/coating for application by screen printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, glass and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 113–15 include, but are not limited to, manufacturing of medical devices and instruments.Features Low temperature curing, flexible & highly filled, ideal for polyester

125-20 is a silver/silver chloride, one component, chemically resistant, medical electrode epoxy ink and coating suitable for application by screen-printing. This product features excellent adhesion to polyimide, polyester, polycarbonate, glass, and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to methyl ethyl ketone (MEK) and acetone as well as many other chemistries. It is also very resistant to scratching and creasing. Some applications for 125-20 include, but are not limited to, polymer thick film circuitry, trans-dermal drug delivery, ECG and EKG electrodes, defibrillator pads, tens electrodes and muscle stimulator electrodes. 125-20 is formulated to be screen-printed but can also be syringe dispensed, dipped and sprayed. The last two methods require dilution.Features Excellent Print Definition High Electrical Conductivity High Temperature Resistance Chemically Resistant Excellent Adhesion Long Screen Life Chemically resistant electrode ink

113-09H is a silver/silver chloride, medical grade, electrically conductive ink and coating suitable for application by screen printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 113-09H include, but are not limited to, transdermal drug delivery, ECG electrodes, tens electrodes and muscle stimulator electrodes. 113-09H is a more hydrophilic version of 113-09.Features Hydrophilic version of 113-09

126-03(SP)C is a highly elastomeric, electrically conductive, silicone-based ink. This product features a highperformance design useful in a wide range of printing and coating applications and features excellent bonding to most metal and plastic substrates. This product is very resistant to flexing and creasing and is ideal for applications that include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, sealing of electronic casings. 126-03(SP)C is one of the few conductive materials that can bond/adhere to silicone substrates and surfaces and features a uniquely long pot life.Features Excellent Bonding to Difficult Surfaces High Temperature Resistance Wide Range of Applications Screen Printable/Syringe Dispensable Elastomeric silicone resistive ink, non-flammable

126-49(SP) is a highly elastomeric, electrically conductive, silicone-based medical electrode ink. This product features a high-performance in a wide range of sensing, delivery, and stabilizing applications and features excellent repeatability, stability, and accuracy. This product is highly resistant to flexing and creasing and is ideal for applications that include, but are not limited to: ECG electrodes, TENS electrodes, reference electrodes, and transdermal drug delivery. 126-49(SP) is one of the few conductive materials that can bond/adhere to silicone substrates and surfaces and features a uniquely long pot life.Features Excellent Bonding to Difficult Surfaces High Temperature Resistance Long screen life Superior Elasticity Screen Printable/Syringe Dispensable Elastomeric electrode ink for reference electrodes

112-15A is an ink/coating with extremely high electrical conductivity for application by screenprinting, dipping and syringe dispensing. The product features excellent adhesion to Kapton®, Mylar®, glass and a variety of other substrates. The superior conductivity of this product allows the end user to print narrower and/or longer circuit trace lines without compromising overall maximum ohm values. The proper use of this feature can result in a significant cost saving. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 112–15A include, but are not limited to, emi/rfi shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches and coatings for tantalum capacitors. 112-15A is a lower viscosity version of 112-15.Features Standard membrane switch conductive ink.

125-09PC is a radio opaque ink/coating for application by screen printing, dipping and syringe dispensing. The product features excellent adhesion to Kapton, Mylar, polycarbonate, glass and a variety of other substrates. Unlike conventional conductive materials, this product is very resistant to abrasion, scratching, flexing and creasing. Some applications for 125-09PC include, but are not limited to, manufacturing of medical devices and instruments. 125-09PC is a polycarbonate compatible version of 125-09.Features Very flexible, low temperature curing, ideal for polycarbonate