Products

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jER™ YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2001 is a silicone-acrylic rubber-type impact modifier with high impact strength in all temperatures and excellent weatherability. It can be used with ABS, PC, PLA, and other matrix resins in a variety of automotive, aerospace and electric and electronic applications. Features Can be used with recycled plastics Good weather stability Low temperature impact resistance *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2200 is a silicone-acrylic-based rubber impact modifier with an epoxy-modified shell.Compatible with Polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyamide (PA) and alloy, it provides hydrolysis resistance, heat-aging resistance and impact strength for a wide range of automotive, aerospace and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

METABLEN™ S 2030 is a silicone-acrylic-based rubber impact modifier with excellent weatherability and super high impact strength at room temperature and low temperatures. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistanceHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ A 3000 is an acrylic-modified polytetrafluoroethylene (PTFE) used in vacuum molding, foam molding, blow molding and profiling. It improves the melt tension that is required in these processing methods by minimizing increases in melt viscosity, without sacrificing the inherent properties of thermoplastics.BenefitsIncreases melt tension of a resinMaintains fluidityEnhances die swellImproves the flexural modulus, heat deformation temperature, and other properties of polypropyleneAnti-drip effect with flame-retardant resinsImproves filler dispersibilityBetter surface appearanceIncreases foam expansion ratioApplicationsAutomotiveConsumer goodsElectric and electronics*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2100 is a silicone-acrylic-based rubber impact modifier with good colorability and impact strength. It is used for polycarbonates (PC) and polycarbonate blends, polyvinyl chloride, engineering plastics and polyolefins in a variety of automotive, aerospace, consumer goods, and electric and electronic applications. METABLEN™ S-2100 provides ductility on facial impact tests, even after immersion of coating chemicals. The effect is maintained at higher molding temperatures. BenefitsEasy to processFlame retardancy for engineering plastics and polyolefins elastomersFeaturesGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ SX-006 is a silicone-acrylic rubber-type impact modifier that provides impact strength and weatherability while maintaining melt-flow ability and scratch resistance of PMMA and SAN. It also gives vivid molded-in colors like piano black. The compounded resins can be widely used in automotive exterior applications (e.g. front grill, pillar, door mirror housing). Features High impact strength in all temperature zones High modulus and excellent heat aging resistance Excellent colorability *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S X-005 is a silicone-acrylic rubber-type impact modifier that provides flame retardance, hydrolysis resistance and impact strength. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesFlame retardantWeather stabilityHydrolysis resistanceImpact resistance even at low temperaturesLow friction*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ W 600A is an acrylic rubber-type impact modifier with good weatherability and hydrolysis resistance. It is used for polylactic acid (PLA), polycarbonate/polybutylene terephthalate (PC/PBT) and polycarbonate/polyethylene terephthalate (PC/PBT) in 3D printer filaments and aerospace, consumer goods, and electric and electronic applications.FeaturesHigh level of hydrolysis resistance Good impact strengthMaintains weather stability*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ A 3800 is acrylic-modified polytetrafluoroethylene (PTFE) that can be used as an anti-dripping agent for flame retardant formulations. It can be used for PC and alloy in automotive, aerospace, consumer goods, and electric and electronics applications.BenefitsResins with METABLEN™ A-3800 and flame retardant achieve V-0 in UL-94 testingImproves melt tensionIncreases die swellEnhances surface appearanceIncreases foam expansion ratio FeaturesAnti-dripping capabilityEasy to handle and processFlame retardantGood mechanical propertiesDisperses better than standard PTFE powders *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ C 223A is a butadiene-based rubber and graft copolymer. It is used as an impact modifier for ABS, polyamides, PC, PLA, and other matrix resins in automotive and transportation, electrical and electronics, and consumer goods applications.FeaturesImpact resistanceSuper high impact strength in all temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2260 is a silicone-acrylic-based rubber core shell-type impact modifier that provides super high impact strength and weatherability to acrylonitrile butadiene styrene (ABS), acrylonitrile styrene acrylate (ASA) and poly methyl methacrylate (PMMA) through extrusion and moldings. It is used for esthetic exterior car components such as front grills, and housings for electronics.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ F 410 is an acrylic gloss control agent that provides a matte finish for injection molded plastics and elastomers. It can also be used as a blocking inhibitor for film and sheet extrusion.FeaturesGood dispersibilityPrevents blocking of sheet and film *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ W 450A is an acrylic rubber-type impact modifier with good weatherability and impact strength. It is used for polyvinyl chloride (PVC) in window frames, pipes and gutters.FeaturesHigh level of elasticity Good impact strengthMaintains weather stability*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ SRK-200A is a silicone-acrylic-based rubber impact modifier with heat-aging resistance and impact strength. It is used for polycarbonate/acrylonitrile butadiene styrene (PC/ABS) and polycarbonate/polybutylene terephthalate (PC/PBT) in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesChemical resistanceWeather stabilityHeat resistanceHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2130 is a silicone-acrylic-based rubber impact modifier optimized for flame retardant polycarbonate (PC) resins. It adds colorability, heat-aging resistance and impact strength to PC and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UT-7792 is a bio-based urethane acrylate oligomer. (Development product) Its biomass degree is 71% while its mechanical properties are the same as a non-biomass grade UV-3300B, with higher elongation and very soft rubbery elasticity suitable for using UV-curable adhesives for electronics devices. Features Bio-based Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Duratron® T5530 PAI is a high-performance, glass-reinforced polyamide-imide material that offers exceptional rigidity, retention of stiffness, low thermal expansion, and outstanding load-carrying capabilities. This 30% glass-reinforced grade is ideal for structural applications in the semiconductor, electronics, and aerospace industries, where high strength, stiffness, and dimensional stability are required.Features:High rigidity and retention of stiffnessLow thermal expansionOutstanding load-carrying capabilities30% glass reinforced for added strength and stiffnessBenefits:Suitable for structural applications in harsh environmentsOffers exceptional dimensional stability up to 260°CIdeal for precision parts in the electronic and semiconductor industriesApplications:Aerospace and defenseSemiconductor and electronicsIndustrial machinery and equipmentMedical devicesPrecision parts in high-temperature environmentsNote: The suitability of Duratron T5530 PAI for sliding parts should be carefully evaluated as the glass fibers may cause abrasion to the mating surface.

KyronMAX® S-9230 is a high-performance polymer that combines the excellent strength, stiffness, and thermal resistance of PEEK (Polyetheretherketone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessPEEK base: provides excellent thermal stability, dimensional stability and chemical resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength at high temperatures.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the aerospace, medical, and industrial industries where high temperature, strength and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesMedical devices, implants and components in medical equipment that require high strength and biocompatibility.KyronMAX® S-9230 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered.It's also worth mentioning that PEEK is a biocompatible material and can be used in medical applications, but it's important to note that should be evaluated for the specific application and use case.

KyronMAX® S-4340 is a hi-temp PPA injection molding compound filled with ultra high strength carbon fiber. No stock shapes offered, only injection molding pellets.

Ketron® LSG CA30 PEEK is a product available in the form of plates and rods, and possesses an array of beneficial features including ethylene oxide sterilizability, biocompatibility, X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, heat resistance, steam sterilizability, heat sterilizability, wear resistance, plasma gas sterilizability, dimensional stability, chemical resistance, and creep resistance. It comes in a sleek black color and is well-suited for applications in appliances and electronics. Potential uses include nailing target devices, grips, adapters, and washers.

KyronMAX® S-4240 is an advanced polymer material that combines the excellent strength, stiffness, and thermal resistance of PPA (polyphenylsulfone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessPPA base: provides excellent thermal stability, dimensional stability and chemical resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industries, where high temperature and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesElectrical and electronic components where high temperature, chemical and dimensional stability is neededKyronMAX® S-4240 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries. Please note that no stock shapes are offered. It's important to mention that the carbon fiber content can vary, always consult with manufacturer for the exact content and its effect on the properties of the final material.

KyronMAX® S-2220 is a high-performance polymer that combines the excellent strength and toughness of nylon with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength and stiffness are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessNylon base: provides excellent toughness and impact resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionBenefits:Improved strength and stiffness of components in demanding environmentsIncreased resistance to wear and tearEnhanced performance and durability of your productsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industriesComponents that require high strength and stiffness, such as gears and bearing componentsIndustrial and manufacturing equipment where high strength and stiffness is neededComponents that require high strength and stiffness in harsh environmentsKyronMAX® S-2220 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered, only injection molding pellets.lets.

KyronMAX® S-2230 is a high-performance polymer that combines the excellent strength and toughness of nylon with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength and stiffness are required, making it ideal for components that will be exposed to high stress, high impact and high temperature environments.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessNylon base: provides excellent toughness and impact resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environmentsIncreased resistance to wear and tear and high temperatureEnhanced performance and durability of your productsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industriesComponents that require high strength and stiffness, such as gears, bearing components, and bushingsIndustrial and manufacturing equipment where high strength and stiffness is neededComponents that require high strength and stiffness in harsh environments, such as those exposed to high temperature and stress.KyronMAX® S-2230 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered

METABLEN™ S 2501 is a is silicone-acrylic-rubber-type impact modifier that adds hydrolysis resistance, heat-aging resistance and impact strength to polycarbonate (PC), polylactic acid (PLA) and alloy in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistance*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

KyronMAX® S-4330 is a high-performance polymer that combines the excellent strength, stiffness, and thermal resistance of high-temperature PPA (polyphenylsulfone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required, especially at high temperatures.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessHigh-temperature PPA base: provides excellent thermal stability, dimensional stability, and chemical resistance at high temperaturesInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength at high temperatures.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industries, where high temperature and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesElectrical and electronic components where high temperature, chemical and dimensional stability is needed, such as in high temperature motors and generators.KyronMAX® S-4330 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered

SHIKOH™ UV-3300B is UV curable urethane acrylate oligomer with excellent soft-elasticity, and very high elongation. It also shows good mechanical properties even at low temperature. EB and Thermal cure systems are also applicable. Features Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Good mechanical properties at low temperature Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Semitron® ESd 410C PEI Polyetherimide electro static dissipative shapes are the perfect solution for semiconductor and electronics handling environments. These shapes offer exceptional dimensional stability and can withstand temperatures up to 410º F without degradation. The unique properties of Semitron® ESd 410C PEI make it ideal for a wide range of applications, including handling tray, circuit board, hard disk drive, and sensitive processing equipment applications.Features:Surface resistivity of 104 - 106 ohms/sq.Thermal performance to 210 °C (410 °F)Low stress for tight tolerance machiningHigh strength and stiffnessBenefits:Excellent dimensional stabilityResistant to high temperaturesLow stress for tighter tolerances during machiningReduced coefficient of linear thermal expansionMinimal water absorptionApplications:Handling Trays: Trays manufactured from Semitron® ESd 410C dissipate static charges reliably and are dimensionally stable. (Prior materials: PPS, PEEK, Vespel® PI)Circuit Boards: Semitron ESd 410C is ideal for use in circuit boards as it offers excellent dimensional stability and can withstand high temperatures without degradation.Hard Disk Drives: Semitron ESd 410C is an ideal material for use in hard disk drives due to its high strength, low stress properties and exceptional dimensional stability.Sensitive Processing Equipment: Semitron ESd 410C offers low stress properties, minimal water absorption and high strength making it an ideal choice for use in sensitive processing equipment.