Products

Semitron® ESd 520HR Polyamide-imide PAI electro static dissipative shapes are a unique and advanced solution for test equipment and device handling applications within the semiconductor and electronics industry. The product possesses the unique ability to resist dielectric breakdown at high voltages, and maintains its performance throughout the 100V to 1000V voltage range while offering the mechanical performance needed to excel in demanding applications.Features:Resists dielectric breakdown at high voltagesMaintains performance throughout the 100V to 1000V voltage rangeHigh strength and heat resistanceSurface resistivity of 10E10 to 10E12 ohms per squareBenefits:High mechanical strength results in longer useful life of the test heads and greater units (tested) per hour.Minimizes the risk of 'leakage' (cross-talk)Retains its surface resistivity at electrical forces greater than 100 volts.Applications:IC Device Testing Fixtures: A test fixture manufacturer recently began using Semitron ESd 520HR that combines electrostatic dissipation (ESD) and high mechanical strength, to make integrated circuit test heads.Test nests, sockets, and contactors for test equipment and other device handling components.Other applications where controlled bleed off of static charges is critical.

Semitron® ESd 490HR Polyetheretherketone PEEK electro static dissipative shapes offer similar physical properties as Semitron® ESd 480 PEEK, but exhibit a higher resistivity value in the 10E8 to 10E10 ohms per square range. Semitron® ESd 490HR PEEK components are thermally stable to temperatures of 490° F / 270° C without degradation, and also possess high structural strength and stiffness combined with excellent dimensional stability. Furthermore, this particular grade is non-sloughing, which is why it is an ideal solution for socket, nest, and contactor manufacturing for test equipment, and other electronic device handling applications.Features:High resistivity value in the 10E8 to 10E10 ohms per square rangeThermally stable to temperatures of 490° F / 270° C without degradationHigh structural strength and stiffnessExcellent dimensional stabilityNon-sloughingBenefits:Ideal for socket, nest, and contactor manufacturing for test equipmentSuitable for electronic device handling applicationsNon-sloughing feature makes it a good option for applications where debris generation is a concernHigh thermal stability and dimensional stability make it suitable for high-temperature and critical applicationsApplications:Socket, nest, and contactor manufacturing for test equipmentElectronic device handling applicationsOther high-temperature and critical applications requiring high resistivity, thermal stability, and dimensional stability.

Ketron® CM HPV Polyetheretherketone PEEK shapes, a compression molded, carbon fiber reinforced, graphite and PTFE lubricated material that offers the lowest coefficient of friction and the best machinability of all PEEK materials. Features: Compression molded and carbon fiber reinforced with graphite and PTFE lubricants Lowest coefficient of friction and best machinability of all PEEK materials Low wear and friction, and high LPV Benefits: Improves the performance of service bearings, bushings, insulators, valves, and seals with its combination of low wear and friction and high LPV Low coefficient of friction and best machinability of all PEEK materials Suitable for wear and friction applications Applications: Service bearings Bushings Insulators Valves Seals Wear and friction applications Ketron® CM HPV PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your service bearings, bushings, insulators, valves, and seals or need a material suitable for wear and friction applications, Ketron® CM HPV PEEK is the ideal solution.

Semitron® HPV ESd PEEK shapes are specially formulated with specific additives that make them an excellent performer in wear and friction applications where antistatic properties are essential. These shapes are specifically designed for electronic fixture applications that require a high degree of dimensional stability over an extended thermal range, as well as precise machinability.Features:Contains specific additives that provide excellent performance in wear and friction applicationsAntistatic properties for electronic fixture applicationsHigh dimensional stability over an extended thermal rangePrecise machinabilityBenefits:Improved performance in wear and friction applicationsReduced risk of static discharge damage to electronic componentsLong-lasting dimensional stability in high-temperature environmentsEasy to machine for precise applicationsApplications:Electronic fixture applications such as test sockets, contactors, and nestsWear and friction applications where antistatic properties are essentialHigh-temperature applications that require dimensional stability and precise machiningVacuum chamber components and other semiconductor equipment.

Ketron® CM 1030HT Polyetherketone PEEK, a carbon filled material that provides added stiffness at high temperatures. With excellent dimensional stability, chemical and corrosion resistance, this material is ideal for a variety of applications that require strength, stiffness and stability at high temperatures. Features: Carbon filled for added strength and stiffness Provides added stiffness at high temperatures Good dimensional stability Excellent chemical and corrosion resistance Benefits: Improved strength and stiffness at high temperatures Suitable for high temperature applications Good dimensional stability ensures consistent and accurate performance Excellent chemical and corrosion resistance ensures long-lasting performance in harsh environments. Applications: Aerospace industry Automotive industry Medical industry Industrial machinery High-temperature applications Ketron® CM 1030HT PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your aerospace, automotive, medical, industrial machinery or high-temperature applications, Ketron® CM 1030HT PEEK is the ideal solution.

Acetron® C Sterra™ POM-C is a general-purpose copolymer acetal grade that is often favored for its porosity-free nature. Acetron® C Sterra™ POM-C shapes offer low moisture and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Techtron® PSBG is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added strength and durability of carbon fiber reinforcement. This compression-molded material is internally lubricated and designed to excel in wear applications where an electrically conductive material is required.Key features:Excellent wear resistance: internally lubricated and carbon fiber-reinforced, allowing it to withstand high loads and minimize wear and tearOutstanding dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerancesExtreme chemical and corrosion resistance: ideal for use in demanding environmentsLow coefficient of linear thermal expansion: making it suitable for applications where dimensional stability is criticalElectrically conductive: ideal for wear applications that require electrical conductivityBenefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion and wearEnhanced precision and dimensional stabilityImproved electrical conductivityApplications:Bushings and bearings, lantern rings, and pump wear components in the oil and gas industryElectrical components as it is electrically conductiveAutomotive and aerospace components as it can withstand high temperatures.Wear-resistant components in general, as it is internally lubricated and reinforced with carbon fiberTechtron® PSBG is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, making it easy to incorporate into your designs.

DURABIO™ D5380 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it has excellent scratch resistance and UV / weather resistance. It also has high transparency and unique optical properties. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for transparent sheets, consumer goods, E&E housing, and cosmetic containers. This grade is suitable for extrusion mold.

Duratron® D7015G PI Polyimide is a high-performance bearing grade material that offers exceptional temperature and wear resistance. With a low coefficient of friction, this material is ideal for use in applications where high loads and speeds are a critical factor.Features:15% graphite added for long wear and frictionSuperior temperature and wear resistanceLow coefficient of frictionMaintains performance abilities with or without lubricationBenefits:Excellent choice for bearing, bushing, and seal applications where higher loads or speeds are a significant factorProvides long-lasting performance in harsh environmentsLow maintenance and long-lasting partsApplications:Bearings and bushings in high-temperature environmentsSeals for high-speed or high-load applicationsMachine parts and components in harsh environments where temperature and wear resistance are needed.

Fluorosint® MT-01 is an advanced polymer material that combines the excellent chemical resistance, low friction and high temperature properties of PTFE (polytetrafluoroethylene) with the added strength, stiffness and stability. This material is designed to excel in demanding applications where high performance and reliability are required.Key features:High strength and stiffness: provides superior mechanical performance at elevated temperaturesPTFE base: provides excellent chemical resistance, low friction and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear, impact and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:High-performance seat, seal and wear applications where extreme conditions are present such as high temperature, pressure and chemical exposureComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesComponents that need high chemical resistance, low friction, and high temperature properties such as valves, pumps, and heat exchangers.Fluorosint® MT-01 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. It's also important to mention that the temperature and chemical resistance can vary depending on the grade of PTFE used as well as other additives, always consult with the manufacturer for the exact properties of the final material.

Semitron® ESd 410C PEI Polyetherimide electro static dissipative shapes are the perfect solution for semiconductor and electronics handling environments. These shapes offer exceptional dimensional stability and can withstand temperatures up to 410º F without degradation. The unique properties of Semitron® ESd 410C PEI make it ideal for a wide range of applications, including handling tray, circuit board, hard disk drive, and sensitive processing equipment applications.Features:Surface resistivity of 104 - 106 ohms/sq.Thermal performance to 210 °C (410 °F)Low stress for tight tolerance machiningHigh strength and stiffnessBenefits:Excellent dimensional stabilityResistant to high temperaturesLow stress for tighter tolerances during machiningReduced coefficient of linear thermal expansionMinimal water absorptionApplications:Handling Trays: Trays manufactured from Semitron® ESd 410C dissipate static charges reliably and are dimensionally stable. (Prior materials: PPS, PEEK, Vespel® PI)Circuit Boards: Semitron ESd 410C is ideal for use in circuit boards as it offers excellent dimensional stability and can withstand high temperatures without degradation.Hard Disk Drives: Semitron ESd 410C is an ideal material for use in hard disk drives due to its high strength, low stress properties and exceptional dimensional stability.Sensitive Processing Equipment: Semitron ESd 410C offers low stress properties, minimal water absorption and high strength making it an ideal choice for use in sensitive processing equipment.

DURABIO™ DT7010 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it has excellent scratch resistance and UV resistance. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for consumer goods, E&E housing, and cosmetic containers. This grade is characterized by high heat resistance and high impact strength. It is suitable for injection mold.

Ketron® Sterra™ HPV PEEK shapes are carbon fiber reinforced with graphite and PTFE lubricants. This gives them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron® Sterra™ HPV PEEK’s combination of low wear, low friction, and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves, and seals. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

DURABIO™ DT6010 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it has excellent scratch resistance and UV resistance. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for consumer goods, E&E housing, and cosmetic containers. This grade is characterized by high-impact strength. It is suitable for injection mold.

Duratron® T4501 PAI Polyamide-imide is a high-performance plastic known for its exceptional compressive strength and excellent wear resistance. This grade is ideal for general purpose wear and friction applications, and is able to endure harsh thermal, chemical, and stress conditions.Features:High compressive strengthExcellent wear resistanceAble to endure harsh thermal, chemical, and stress conditionsSimilar in composition to Duratron® T4301 PAIAvailable in larger shapes or componentsBenefits:Can carry more loadReliable solution for general purpose wear and friction applicationsSuitable for a wide range of applications that require high strength and durabilityApplications:General purpose wear and friction partsLarge shapes and componentsApplications that require high strength and durability such as industrial machinery, automotive and aerospace.

Semitron® ESd 480 Polyetheretherketone PEEK electro static dissipative shapes are a top choice for critical test fixture and wafer handling applications in wet process tools, where static dissipation is critical. These shapes are specifically designed to provide excellent chemical resistance properties and high dimensional stability under varying environmental conditions.Features:Excellent chemical resistance propertiesHigh dimensional stability under varying environmental conditionsSurface resistivity: 106 - 109 ohms/sqBenefits:Ideal for critical test fixture and wafer handling applications in wet process toolsProvides a dissipative range of 106 - 109 ohms/sq, ensuring static dissipation is criticalDimensionally stable, making it ideal for critical test fixture applicationsApplications:Test fixture and wafer handling applications in wet process toolsStructural applications in wet process tools where static dissipation is importantWell-suited for use in wafer handling and other structural applications in wet process tools where static dissipation is important.

Ertalyte® is a high-performance polyethylene terephthalate polyester (PET) produced by Mitsubishi Chemical Advanced Materials. With its exceptional wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, Ertalyte® is the ideal material for applications that require sustained high loads and high-temperature performance.Features:Excellent wear resistanceLow coefficient of frictionHigh strength and toughnessResistant to moderately acidic solutionsRetains more of its original strength up to 180° F / 85° C than nylons or acetalsBenefits:Capable of sustaining high loadsIdeal for applications requiring high-temperature performanceExtends the service life of componentsLow maintenance and repair costsSuitable for use in harsh environmentsApplications:PharmaceuticalFood processing and packagingOil and gasBearings and structural applicationsAny application requiring high load and high-temperature performance.

Ketron® 1000 PEEK is a high-performance polymer that offers excellent mechanical properties and chemical resistance. It is widely used in a variety of applications where high strength and stiffness, low friction, and excellent dimensional stability are required. This material is ideal for instrument and seal components, where its high elongation and toughness make it an excellent choice. Its non-toxic and biocompatible properties make it suitable for use in medical and food processing applications.   Key features: High strength and stiffness Low friction Excellent dimensional stability High elongation and toughness EU 10/2011 and FDA compliant   Benefits: Improved performance and durability of components Increased resistance to chemicals and high temperatures Enhanced biocompatibility and safety in medical and food processing applications Greater design flexibility and compatibility with a wide range of applications and industries   Application: Structural parts: Ketron® PEEK is often used for structural components that are subject to high temperatures and chemical exposure. For example, it is commonly used for vacuum wand handles in semiconductor manufacturing. Bushings, bearings, seals, and back-up rings: Ketron® PEEK is an excellent choice for components that are subject to wear and tear. Its low coefficient of friction and high strength make it suitable for use in a wide range of applications, from aircraft to oil field drilling.   Ketron® 1000 PEEK is available in a range of shapes and sizes, making it easy to incorporate into your designs. It is a versatile and reliable material that can help improve the performance and longevity of your products.

DURABIO™ D7340 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it has excellent scratch resistance and UV / weather resistance. It also has high transparency and unique optical properties. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for consumer goods, E&E housing, and cosmetic containers. This grade is characterized by high heat resistance and is suitable for injection mold.

Ketron® LSG FG PEEK is a product available in the form of plates and rods and boasts a range of features including X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, heat resistance, steam sterilizability, heat sterilizability, plasma gas sterilizability, chemical resistance, ethylene oxide sterilizability, and biocompatibility. It is offered in both beige and black colors and is suitable for applications in equipment and parts, particularly connectors.

TIVAR® Sterra™ DrySlide UHMW-PE is an internally lubricated product. This lubricant is built into the PE-UHMW matrix with a higher molecular weight. It offers a lower coefficient of friction and enhanced wear and abrasion resistance than TIVAR® 1000 PE-UHMW. The additives used also make this material static dissipative and considerably improves UV-resistance. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Semitron® ESd 420V PEI Polyetherimide electro static dissipative shapes, a high-performance material designed for use in the semiconductor and electronics industries. With its unique combination of properties, this grade offers a range of benefits for device handling and test applications.Features:High strength and stiffness, making it suitable for extreme structural applicationsExcellent resistivity in the 10E5 to 10E8 ohms per square range, ensuring reliable electrostatic dissipationHeat deflection temperature of 419° F / 215° C, making it suitable for high temperature environmentsNot subject to dimensional change as a result of exposure to moistureBenefits:Suitable for use in a range of applications within the semiconductor and electronics industriesOffers reliable performance in extreme conditionsCost-effective alternative for applications that do not require the thermal performance of ultra-high performance materialsApplications:Device handling and test applications within the semiconductor and electronics industriesSuitable for use in high temperature environments, including extreme structural applications.

Ketron® GF30 Polyetheretherketone PEEK, a 30% glass fiber reinforced grade that offers excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. This material is designed for applications where high strength, stiffness, and stability are needed, especially at high temperatures. Features: 30% glass fiber reinforced for added strength and stiffness Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Low expansion rate and high flexural modulus Suitable for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 300°F / 150°C Benefits: Offers improved strength, stiffness, and stability in high temperature applications Low expansion rate and high flexural modulus make it suitable for structural applications Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Applications: Structural applications Aerospace industry Automotive industry Medical industry Industrial machinery Chemical processing Ketron® GF30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions, especially at high temperatures. Whether you are looking to improve the performance of your structural applications in the aerospace, automotive, medical, industrial machinery or chemical processing industries, Ketron® GF30 PEEK is the ideal solution.

Ketron® CA30 Polyetheretherketone PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance that Ketron® GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications.

Ketron® LSG CA30 PEEK is a product available in the form of plates and rods, and possesses an array of beneficial features including ethylene oxide sterilizability, biocompatibility, X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, heat resistance, steam sterilizability, heat sterilizability, wear resistance, plasma gas sterilizability, dimensional stability, chemical resistance, and creep resistance. It comes in a sleek black color and is well-suited for applications in appliances and electronics. Potential uses include nailing target devices, grips, adapters, and washers.

DURABIO™ D7342 (D7340-810) is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it also has excellent scratch resistance and UV / weather resistance. It also has high transparency and unique optical properties. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for automotive exterior and interior parts, consumer goods, E&E housing, and cosmetic containers. This grade is characterized by high heat resistance and is suitable for injection mold.

Techtron® PSGF PPS is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added strength and stiffness of glass fiber reinforcement. This compression-molded material is designed to excel in structural applications where dimensional stability and resistance to harsh environments are required.Key features:Extreme dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerances.Chemical and corrosion resistance: suitable for use in demanding environments and harsh chemicals.Glass fiber reinforced: increased strength and stiffness, ideal for structural componentsHigh temperature resistance: can withstand high temperatures and maintain stability.Benefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion and wearEnhanced precision and dimensional stabilityImproved strength and stiffnessApplications:Structural components such as pump housings, valves, and compressors in the oil and gas industryAutomotive and aerospace components as it can withstand high temperatures.Industrial and chemical processing applications where chemical resistance and dimensional stability is needed.General structural components where increased strength and stiffness is neededTechtron® PSGF is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, making it easy to incorporate into your designs.

Semitron® ESd 420 PEI Polyetherimide electro static dissipative shapes exhibit high strength and stiffness, and excellent resistivity in the 10E5 to 10E8 ohms per square range. This grade in particular excels in high temperature environments, making it ideal for extreme structural applications in semiconductor and electronics markets.Features:High strength and stiffnessExcellent resistivity in the 10E5 to 10E8 ohms per square rangeSuitable for high temperature environmentsSurface resistivity: 106 - 109 ohms/sqBenefits:Ideal for extreme structural applications in semiconductor and electronics marketsOnly truly dissipative plastic product for use in high temperature applicationsCan withstand harsh conditions while maintaining its electrostatic propertiesApplications:Semiconductor and electronics industryHigh temperature structural applications such as in electronic components and equipment, where electrostatic discharge (ESD) protection is necessary.Can be used in electronic packaging, automotive, aerospace, and other industries where static control is critical.

Ketron® LSG PEEK is a product available in the form of plates and rods, offering exceptional heat and excellent sterilization resistance through methods like steam, dry heat, ethylene oxide, plasma, gamma, and x-ray. It comes in various colors, including beige, black, blue, red, green, and yellow. The material is characterized by features such as ethylene oxide sterilizability, biocompatibility, X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, heat resistance, steam sterilizability, heat sterilizability, plasma gas sterilizability, chemical resistance. Its main applications include equipment and parts, especially connectors.

DURABIO™ D6350 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it also has excellent scratch resistance and UV / weather resistance. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for automotive exterior and interior parts, consumer goods, E&E housing, and cosmetic containers. This grade is characterized by good flow and is suitable for injection mold.

Sultron® LSG FG R5100 PPSU is a product available in the form of plates and rods, and it possesses various important features. These include being ethylene oxide sterilizable, biocompatible, excellent sterilization resistance, X-ray sterilizable, alkali resistant, life science grade, gamma sterilizable, steam sterilizable, acid resistant, heat sterilizable, plasma gas sterilizable, excellent hydrolysis resistance, and high ductility. It comes in the color black and finds applications in equipment and parts, implants and prosthetics, medical devices and assemblies, surgical instruments, and trays, as well as connectors in the medical field.

DURABIO™ DT7043 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it has excellent scratch resistance and UV / weather resistance. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for automotive exterior and interior parts, consumer goods, E&E housing, and cosmetic containers. This grade is characterized by high impact strength and high heat resistance. It is suitable for injection mold.

Ketron® CM CA30 Polyetheretherketone PEEK, a compression-molded, 30% carbon fiber-reinforced grade that offers exceptional impact, corrosion, chemical, and wear resistance. This black-colored material is designed for applications where high strength, stiffness, and thermal conductivity are needed. Features: 30% carbon fiber reinforced for added strength and stiffness Outstanding impact, corrosion, chemical, and wear resistance Reduced thermal expansion for improved performance High thermal conductivity for rapid heat dissipation Suitable for large parts and bearing applications Benefits: Extends the life of components by resisting wear and corrosion Improves pressure-velocity capabilities and bearing life by dissipating heat faster Provides 3.5 times higher thermal conductivity compared to unreinforced PEEK Offers even higher stiffness, mechanical strength, and creep resistance than Ketron GF30 PEEK Applications: Bearing applications Large parts Automotive industry Aerospace industry Medical industry Industrial machinery Chemical processing Ketron® CM CA30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your bearing applications, need a strong and stiff material for large parts or are in the automotive, aerospace, medical, industrial machinery or chemical processing industries, Ketron® CM CA30 PEEK is the ideal solution.

DURABIO™ D5360 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it has excellent scratch resistance and UV / weather resistance. It also has high transparency and unique optical properties. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for consumer goods, E&E housing, cosmetic containers, and stationery. This grade is characterized by good flow and is suitable for injection mold.

Duratron® CU60 PBI, the ultimate engineering plastic for high-performance applications. This advanced material is made from Polybenzimidazole (PBI) and is the highest performing engineering plastic offered by Mitsubishi Chemical Advanced Materials. With superior mechanical properties, heat resistance, and mechanical property retention over 400°F / 205°C, Duratron® CU60 PBI is the ideal choice for applications where extreme temperatures and high loads are present.Features:Superior mechanical properties, heat resistance, and mechanical property retention over 400°F / 205°CBetter wear resistance and load carrying capabilities at extreme temperatures than any other reinforced or unreinforced advanced engineering plastic"Clean" in terms of ionic impurity and does not outgas (except water)Excellent ultrasonic transparency, making it an ideal choice for probe tip lenses in ultrasonic measuring equipmentExcellent thermal insulation, other plastics in melt do not stick to Duratron CU60 PBIBenefits:Duratron® CU60 PBI offers unmatched performance in high-heat applications, making it ideal for high heat bushings, connectors, valve seats, and probe tip lenses in semiconductor manufacturingIts superior wear resistance and load carrying capabilities make it a great choice for aerospace and other high-performance industriesIts "clean" characteristics make it ideal for use in vacuum chamber applications in semiconductor manufacturingIts excellent thermal insulation and non-stick properties make it ideal for contact seals and insulator bushings in plastic production and molding equipmentDuratron CU60 PBI is an ideal replacement for metals and ceramics in pump components, valve seats, bearings, rollers, and high-temperature insulatorsApplications:High-performance vacuum chamber applications in semiconductor manufacturingAerospace and other high-performance industriesHigh heat bushings, connectors, valve seats, and probe tip lensesContact seals and insulator bushings in plastic production and molding equipmentPump components, valve seats, bearings, rollers, and high-temperature insulatorsCritical components to decrease maintenance costs and to gain valuable production "uptime".

Ertalyte® Sterra™ PET is an unreinforced, semi-crystalline grade that is produced from proprietary resin grades made by Mitsubishi Chemical Advanced Materials. Characterized by its excellent wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, this grade is capable of sustaining high loads and retains more of its original strength up to 180°F (85°C) than nylons or acetals. Due to these characteristics, Ertalyte® Sterra™ PET components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing and packaging, and oil and gas industries. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.