Products

Ketron® CM GF30 Polyetheretherketone PEEK, a compression-molded, 30% glass fiber reinforced grade that offers excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. This brownish-grey colored material is designed for applications where high strength, stiffness, and stability are needed in extreme environments. Features: 30% glass fiber reinforced for added strength and stiffness Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Low expansion rate and high flexural modulus Suitable for large structural applications that require superior strength, stiffness, and stability Benefits: Offers a higher stiffness and creep resistance than Ketron 1000 PEEK Has a much better dimensional stability Ideal for structural applications carrying high static loads for long periods of time at elevated temperatures Applications: Structural applications Aerospace industry Automotive industry Medical industry Industrial machinery Chemical processing Ketron® CM GF30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your structural applications in the aerospace, automotive, medical, industrial machinery or chemical processing industries, Ketron® CM GF30 PEEK is the ideal solution. However, it is important to note that the glass fibers tend to abrade the mating surface so the suitability for sliding parts should be carefully examined.

Ertacetal® H / Acetron® H Polyoxymethylene POM-H is a homopolymer acetal grade that offers exceptional mechanical strength, stiffness, hardness, and creep resistance, making it the perfect choice for a wide range of demanding applications.Features:Superior mechanical properties that allow the use of standard fastenersExcellent stability and machining properties that reduce machining costsDurable material that allows for easy installation and removal with minimal distortionHigh chemical resistance for a long service lifetimeHigh impact strength, even at low temperaturesExcellent dimensional stability with low water absorptionBenefits:Reduced machining costs and improved efficiency in manufacturingLong-lasting and durable components that can withstand demanding conditionsEasy installation and removal, even in tight spacesHigh chemical resistance ensures a long service lifetimeHigh impact strength, even at low temperatures, ensures reliable performance in any environmentExcellent dimensional stability ensures consistent and accurate resultsApplications:Small diameter, thin-walled bushings and bearingsGearsElectrical componentsMedical and diagnostic equipmentValvesFluid handling components

Semitron® ESd 480 Polyetheretherketone PEEK electro static dissipative shapes are a top choice for critical test fixture and wafer handling applications in wet process tools, where static dissipation is critical. These shapes are specifically designed to provide excellent chemical resistance properties and high dimensional stability under varying environmental conditions.Features:Excellent chemical resistance propertiesHigh dimensional stability under varying environmental conditionsSurface resistivity: 106 - 109 ohms/sqBenefits:Ideal for critical test fixture and wafer handling applications in wet process toolsProvides a dissipative range of 106 - 109 ohms/sq, ensuring static dissipation is criticalDimensionally stable, making it ideal for critical test fixture applicationsApplications:Test fixture and wafer handling applications in wet process toolsStructural applications in wet process tools where static dissipation is importantWell-suited for use in wafer handling and other structural applications in wet process tools where static dissipation is important.

Ertalon® 6 SA is a high-performance polyamide (PA6) material that boasts a combination of excellent mechanical, electrical and chemical properties. Its exceptional mechanical strength, stiffness, toughness and damping properties make it a versatile choice for a wide range of mechanical construction and maintenance applications.Features:Superior mechanical strength and stiffnessExcellent toughness and damping propertiesResistance to creep and wearExcellent electrical insulationOutstanding chemical resistanceBenefits:Durable and long-lasting performance in demanding mechanical applicationsExcellent resistance to wear and tear, even in harsh environmentsHigh level of electrical insulation for safety and reliabilityResistant to a wide range of chemicals, making it suitable for a variety of applicationsApplications:Mechanical construction and maintenanceIndustrial equipment and machineryAutomotive and transportation componentsElectrical and electronic componentsGeneral engineering and manufacturing

Duratron® T4301 PAI Polyamide-imide is a high-performance plastic that offers exceptional properties for severe service wear applications. The addition of PTFE and graphite provides this grade with improved wear resistance and dimensional stability, making it an ideal solution for non-lubricated bearings, seals, bearing cages, and reciprocating compressor parts.Features:Very low expansion rate and coefficient of frictionLittle to no slip-stick in useExcellent dimensional stability over a wide temperature rangeHigh flexural modulus of 1,000,000 psiHigher wear resistance compared to unfilled Duratron® T4203 PAI gradeBenefits:Allows for increased bearing speeds and extended part lifeCan be used in severe service wear applicationsIdeal for non-lubricated bearings, seals, bearing cages, and reciprocating compressor partsApplications:Bearings and bearing cagesSealsReciprocating compressor partsOther severe service wear applicationsCompression-molded Duratron T4501 PAI is similar in composition to Duratron T4301 PAI, and is selected when larger shapes are required. Prior materials for these applications include steel cages, hardened steel balls, and bronze bushings. Duratron T4301 PAI (colour: black) also offers excellent dimensional stability over a wide temperature range.

Duratron® T4203 PAI is a polyamide-imide material that offers exceptional strength and durability in high-tech equipment and structural applications. With features such as high impact strength, high elongation, and dimensional stability, it is a reliable choice for precision parts and components that require high performance in extreme conditions.Features:High impact strengthHigh elongationDimensional stabilityHigh temperature resistanceExceptional machinabilityBenefits:Able to withstand extreme conditions and loadsIdeal for precision parts and components in high-tech equipmentSuitable for structural applications such as linkages and seal ringsExcellent choice for wear applications involving impact loading and abrasive wearApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearPrecision parts in high-tech equipment

Ketron® LSG PEEK-CLASSIX™ White is a product available in the form of plates and rods, designed for dental applications. This material is characterized by features like ethylene oxide sterilizability, biocompatibility, excellent sterilization resistance, X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, good mechanical properties, steam sterilizability, heat sterilizability, plasma gas sterilizability, and chemical resistance. It comes in the color white, making it suitable for dental applications.

Semitron® MP 370 shapes exhibit excellent moisture absorption and thermal resistance, while also maintaining outstanding strength and dimensional stability. As a result, this grade is often selected for test socket applications where precision machining is critical, and complex geometries are prevalent.Features:Excellent moisture absorptionHigh thermal resistanceOutstanding strength and dimensional stabilityExcellent machinabilityBenefits:Allows for precision machining and complex geometries in test socket applicationsProvides greater strength and dimensional stability compared to unfilled PEEK materialsLow internal stresses and no "soft center" issues associated with injection molded blanksApplications:Test sockets for the semiconductor manufacturing industryPrecision machining and complex geometries in various industries where high thermal resistance and moisture absorption are required.

Forzeas™ HA9010 represents a biodegradable and bio-based compound material specifically crafted for sheet molding applications. Successfully passing the OK compost Home test, this grade adheres to rigorous environmental standards and has 80% or more bio-based carbon content calculated with reference to ASTM D6866 standard.  Tailored for food contact applications, it combines sustainability with versatility, making it a responsible and reliable choice for various uses where food contact safety is essential.

Ertalon® 66 SA / Nylatron® 101 Polyamide PA66 unmodified shapes are characterized by their superior combination of strength and toughness. Compared to other unmodified nylon grades, Nylatron® 101 PA66 / Ertalon® 66 SA PA66 components possess superior mechanical strength, stiffness, wear resistance, in addition to displaying one of the highest melting points of all PA66 materials. Due to these properties, and this grade’s FDA and EU food compliant composition, Nylatron® 101 PA66 / Ertalon® 66 SA PA66 is often specified for screw machined electrical insulators, bushings, bearings, gears, roller wheels, star wheels, and seals.

BioPBS™ FZ91PM/PB is bio-based polybutylene succinate (PBS) produced from polymerization of bio-based succinic acid and 1,4-butanediol. Alike LDPE, BioPBSTM is soft and flexible semi-crystalline polyester with excellent properties suitable for blown and cast film extrusion.

BioPBS™ FD72PM/PB is a bio-based polybutylene succinate (PBS) produced through the polymerization of bio-based succinic acid and 1,4-butanediol. Similar to LDPE, BioPBS™ is a soft and flexible semi-crystalline polyester with excellent properties that make it suitable for injection molding articles for general purposes. As an essentially bio-based product, it excels in biodegradability and compostability, offering a convenient drop-in solution to achieve better sustainability goals.

Ertalyte® Sterra™ PET is an unreinforced, semi-crystalline grade that is produced from proprietary resin grades made by Mitsubishi Chemical Advanced Materials. Characterized by its excellent wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, this grade is capable of sustaining high loads and retains more of its original strength up to 180°F (85°C) than nylons or acetals. Due to these characteristics, Ertalyte® Sterra™ PET components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing and packaging, and oil and gas industries. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

TIVAR® Sterra™ ESD UHMW-PE are electrostatic dissipative shapes produced from reprocessed industrial UHMW materials and repurposed for use in a variety of industries, such as agriculture and grain handling, bulk material handling, and parcel handling. As a premium grade that is both economical and eco-friendly, TIVAR® Sterra™ ESD UHMW-PE components exhibit excellent abrasion and corrosion resistance, outstanding impact strength, minimal moisture absorption, and a low coefficient of friction. For these reasons, TIVAR® Sterra™ ESD UHMW-PE is often a favored solution for conveyor, chute, and hopper applications, where electrical charge build-ups are prevalent. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Ketron® Sterra™ 1000 PEEK is an unfilled, general-purpose grade known for its exceptional elongation and toughness. It is ideal for instrument and seal components, where ductility and inertness are crucial. Ketron® Sterra™ 1000 PEEK portfolio, featuring recycled content for a reduced carbon footprint compared to non-recycled materials.

Forzeas™ HA7004 stands as an ideal choice for food contact injection molding applications. Successfully passing the OK compost Home test, this grade aligns with stringent environmental standards and has 80% or more bio-based carbon content calculated with reference to ASTM D6866 standard. This underscores its commitment to sustainability and makes Forzeas™ HA7004 a reliable option for applications where food contact safety is paramount.

KyronMAX® S-2212 is an advanced polymer material that combines the excellent strength, stiffness, and impact resistance of nylon with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, and toughness are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessNylon base: provides excellent impact resistance, toughness and good chemical resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear, impact and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industries, where high temperature and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesComponents that need high toughness, such as gears, cogs, and sprockets for industrial machinery and equipmentKyronMAX® S-2212 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries. Please note that no stock shapes are offered. It's important to mention that the carbon fiber content can vary, always consult with the manufacturer for the exact content and its effect on the properties of the final material.

Fluorosint® MT-01 is an advanced polymer material that combines the excellent chemical resistance, low friction and high temperature properties of PTFE (polytetrafluoroethylene) with the added strength, stiffness and stability. This material is designed to excel in demanding applications where high performance and reliability are required.Key features:High strength and stiffness: provides superior mechanical performance at elevated temperaturesPTFE base: provides excellent chemical resistance, low friction and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear, impact and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:High-performance seat, seal and wear applications where extreme conditions are present such as high temperature, pressure and chemical exposureComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesComponents that need high chemical resistance, low friction, and high temperature properties such as valves, pumps, and heat exchangers.Fluorosint® MT-01 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. It's also important to mention that the temperature and chemical resistance can vary depending on the grade of PTFE used as well as other additives, always consult with the manufacturer for the exact properties of the final material.

DURABIO™ D7340 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it has excellent scratch resistance and UV / weather resistance. It also has high transparency and unique optical properties. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for consumer goods, E&E housing, and cosmetic containers. This grade is characterized by high heat resistance and is suitable for injection mold.

Ketron® LSG PEEK is a product available in the form of plates and rods, offering exceptional heat and excellent sterilization resistance through methods like steam, dry heat, ethylene oxide, plasma, gamma, and x-ray. It comes in various colors, including beige, black, blue, red, green, and yellow. The material is characterized by features such as ethylene oxide sterilizability, biocompatibility, X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, heat resistance, steam sterilizability, heat sterilizability, plasma gas sterilizability, chemical resistance. Its main applications include equipment and parts, especially connectors.

Nylatron® 703 XL, a unique, ultra-high performance bearing grade made from Polyamide PA6. This material offers exceptional wear resistance, even better than Nylatron® NSM, while also providing superior load bearing capabilities and a near zero level of stick-slip.Features:Ultra-high performance bearing gradeBetter wear resistance than Nylatron® NSMSuperior load bearing capabilitiesNear zero level of stick-slipBenefits:Provides an extraordinary amount of motion control for high-precision applicationsElimination of stick-slip improves performance in high-precision applicationsIdeal for wear-intensive applicationsApplications:Wear padsConveyor componentsCorner tracksPneumatic control surfacesConstruction and heavy equipment marketsMade from a high performance cast nylon 6, Nylatron 703 XL is suitable for heavy-duty, high-load and high-speed applications where the highest level of wear resistance and load-bearing capabilities are required. It offers improved performance and longer service life than other materials. It is a cost-effective solution for construction, heavy equipment and other industrial markets that demand high-performance and durability.

Ketron® CM CA30 Polyetheretherketone PEEK, a compression-molded, 30% carbon fiber-reinforced grade that offers exceptional impact, corrosion, chemical, and wear resistance. This black-colored material is designed for applications where high strength, stiffness, and thermal conductivity are needed. Features: 30% carbon fiber reinforced for added strength and stiffness Outstanding impact, corrosion, chemical, and wear resistance Reduced thermal expansion for improved performance High thermal conductivity for rapid heat dissipation Suitable for large parts and bearing applications Benefits: Extends the life of components by resisting wear and corrosion Improves pressure-velocity capabilities and bearing life by dissipating heat faster Provides 3.5 times higher thermal conductivity compared to unreinforced PEEK Offers even higher stiffness, mechanical strength, and creep resistance than Ketron GF30 PEEK Applications: Bearing applications Large parts Automotive industry Aerospace industry Medical industry Industrial machinery Chemical processing Ketron® CM CA30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your bearing applications, need a strong and stiff material for large parts or are in the automotive, aerospace, medical, industrial machinery or chemical processing industries, Ketron® CM CA30 PEEK is the ideal solution.

Ketron® Sterra™ HPV PEEK shapes are carbon fiber reinforced with graphite and PTFE lubricants. This gives them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron® Sterra™ HPV PEEK’s combination of low wear, low friction, and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves, and seals. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

KyronMAX® S-4330 is a high-performance polymer that combines the excellent strength, stiffness, and thermal resistance of high-temperature PPA (polyphenylsulfone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required, especially at high temperatures.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessHigh-temperature PPA base: provides excellent thermal stability, dimensional stability, and chemical resistance at high temperaturesInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength at high temperatures.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industries, where high temperature and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesElectrical and electronic components where high temperature, chemical and dimensional stability is needed, such as in high temperature motors and generators.KyronMAX® S-4330 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered

TIVAR® Sterra™ DrySlide UHMW-PE is an internally lubricated product. This lubricant is built into the PE-UHMW matrix with a higher molecular weight. It offers a lower coefficient of friction and enhanced wear and abrasion resistance than TIVAR® 1000 PE-UHMW. The additives used also make this material static dissipative and considerably improves UV-resistance. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

DURABIO™ DT6010 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it has excellent scratch resistance and UV resistance. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for consumer goods, E&E housing, and cosmetic containers. This grade is characterized by high-impact strength. It is suitable for injection mold.

KyronMAX® S-9230 is a high-performance polymer that combines the excellent strength, stiffness, and thermal resistance of PEEK (Polyetheretherketone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessPEEK base: provides excellent thermal stability, dimensional stability and chemical resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength at high temperatures.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the aerospace, medical, and industrial industries where high temperature, strength and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesMedical devices, implants and components in medical equipment that require high strength and biocompatibility.KyronMAX® S-9230 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered.It's also worth mentioning that PEEK is a biocompatible material and can be used in medical applications, but it's important to note that should be evaluated for the specific application and use case.

Sultron® Polysulfone PSU is a versatile and reliable thermoplastic material that offers a combination of excellent mechanical, thermal, and electrical properties. With its ability to withstand high temperatures and resist a wide range of chemicals, Sultron® PSU is the ideal solution for applications that demand the highest level of performance and durability. Features: Translucent material with excellent mechanical, thermal, and electrical properties Often replaces polycarbonate in applications requiring higher temperature resistance and improved chemical resistance Outstanding radiation stability and resistance to acidic and salt solutions, detergents, hot water, and steam Benefits: Broad temperature range capability makes Sultron® PSU suitable for a wide range of applications Good thermal and electrical insulation characteristics ensure consistent performance in demanding environments Hydrolysis resistant and radiation stable, making it a reliable choice for analytical instrumentation, medical devices, and semiconductor process equipment components Applications: Analytical instrumentation Medical devices Semiconductor process equipment components Any application that demands high temperature resistance and chemical resistance.

Nylatron® 101 Polyamide PA66 and Ertalon® 66 SA Polyamide PA66 - the ultimate solution for applications that require a combination of strength and toughness. These unmodified shapes are characterized by their superior mechanical strength, stiffness, and wear resistance, making them ideal for a wide range of industrial applications.Features:High mechanical strength, stiffness, and hardnessGood fatigue resistance, sliding properties and machinabilityHigh mechanical damping abilityExcellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Benefits:With Nylatron® 101 PA66 and Ertalon® 66 SA PA66, you can be sure that your components will withstand even the most demanding of conditions.The superior strength and toughness of these materials ensures that they can handle heavy loads and high-stress applications with ease.The excellent wear resistance and sliding properties of these materials make them ideal for use in gears, bearings, bushings, and other moving parts.Their good electrical insulating properties and resistance to high energy radiation make them suitable for use in electrical equipment and machinery.Applications:Screw machined electrical insulatorsBushings, bearings, gears, roller wheels, star wheels, and sealsFood processing and packaging industry (FDA and EU food contact compliant composition)Suitable for machining on automatic lathes

Acetron® C Sterra™ POM-C is a general-purpose copolymer acetal grade that is often favored for its porosity-free nature. Acetron® C Sterra™ POM-C shapes offer low moisture and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Semitron® CMP XL20 Polyamideimide PAI shapes were specifically developed for CMP ring applications in the semiconductor and electronics industry, due to their excellent long wear life in CMP slurries. In addition to these characteristics, Semitron® CMP XL20 PAI components display high strength and stiffness, and outstanding wear resistance over a broad range of temperatures, making this grade the ideal solution for dynamic applications in process environments.Features:Specifically developed for CMP ring applications in the semiconductor and electronics industryExcellent long wear life in CMP slurriesHigh strength and stiffnessOutstanding wear resistance over a broad range of temperaturesBenefits:Ideal solution for dynamic applications in process environmentsSignificantly lower cost per waferOutperforms PPS up to 20x in most processesPromotes fewer edge defects and better uniformityApplications:CMP ring applications in the semiconductor and electronics industryCan be used in clamp rings, trench rings, screws, pins, and shower headsSuitable for use in centering pins, focus rings, insulators, vacuum pads, and wafer guides.

Ertalon® 4.6 and Nylatron® 4.6 are advanced polyamide PA46 shapes that are known for their superior heat aging resistance and ability to retain outstanding stiffness and creep resistance over a wide range of temperatures.Features:Superior heat aging resistanceRetains outstanding stiffness and creep resistance at high temperaturesOutperforms PA6, PA66, POM, and PET in extreme environmentsBenefits:Ideal for use in extreme environments where traditional materials fall shortCan withstand high temperatures without losing mechanical propertiesSuitable for a wide range of applications, including bushings, bearings, gears, pulleys, sheaves, wear pads, valve seats, seals, and conveyor wear componentsApplications:Bushings and bearings in extreme temperature environmentsGears and pulleys in high-heat industrial settingsWear pads and valve seats in harsh chemical environmentsSeals and conveyor wear components in high-temperature applications.

Techtron® HPV PPS is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added wear resistance and strength of glass fiber reinforcement and internal lubrication. This compression-molded material is designed to excel in demanding environments and applications where wear resistance and dimensional stability are required.Key features:Superior wear resistance: internally lubricated and glass fiber-reinforced, allowing it to withstand high loads and minimize wear and tearOutstanding chemical and hydrolysis resistance: suitable for use in harsh environments and chemicalsExcellent dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerancesGreat electrical insulating and dielectric propertiesLow coefficient of friction and inherent low flammabilityGlass fiber reinforced: increased strength and stiffness, ideal for wear componentsFood grade availableBenefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion, and wearEnhanced precision and dimensional stabilityImproved electrical insulation and dielectric propertiesReduced friction and lower flammability riskMore cost-effective than advanced engineering plastics for certain applicationsApplications:Wear components such as bushings and bearings, CIP wash down parts, and pump, valve, and compressor applications in the aerospace, food processing, and oil and gas industries.Industrial equipment such as industrial drying and food processing ovens (bearings, rollers, etc.)Chemical process equipment (pump-, valve & compressor components)Electrical insulating systemsCost-effective alternative to advanced engineering plastics in certain applicationsTechtron® HPV is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, including food grade, making it easy to incorporate into your designs.

Sultron® LSG PSU offers a variety of features that make it a suitable material for medical devices and assemblies. It exhibits excellent sterilization resistance, X-ray sterilizability, life science grade, excellent transparency properties, gamma sterilizability, good mechanical properties, steam sterilizability, heat sterilizability, plasma gas sterilizability, excellent thermal properties, good electrical properties, ethylene oxide sterilizability, biocompatibility, and hydrolysis resistance. It is a product available in yellow and translucent colors and can be found in the physical forms of plates and rods.

DURABIO™ D6350 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it also has excellent scratch resistance and UV / weather resistance. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for automotive exterior and interior parts, consumer goods, E&E housing, and cosmetic containers. This grade is characterized by good flow and is suitable for injection mold.

Ertalon® 6PLA / Nylatron® MC 907 is a high-performance, unmodified cast nylon 6 grade that offers exceptional strength, hardness, creep resistance, and heat aging properties. This grade is also FDA and EU food contact compliant, making it ideal for use in the food processing and packaging industry.Features:High mechanical strength, stiffness, and hardnessGood resistance to creep, wear, fatigue, and heat agingGood sliding properties and machinabilityElectrical insulation and resistance to gamma and x-ray radiationBenefits:Can withstand high loads and extreme temperaturesProvides reliable performance in harsh environmentsEasy to machine for custom applicationsSafe for use in food contact applicationsApplications:Gears, rollers, wheels, bearings, and conveyor wear parts in the food processing and packaging industryOther applications that require high strength and hardness, such as sleeve and slide bearings, wear pads, rollers, pulleys, scrapers, gear wheels, sprockets, star wheels, and insulators.