Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Flammability
- Processing Information (Injection Molding)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus | 2380.0 | MPa | ISO 178 |
Flexural Strength | 75.0 | MPa | ISO 178 |
Flexural Stress (3.5% Strain) | 72.0 | MPa | ISO 178 |
Tensile Modulus | 2350.0 | MPa | ISO 527 |
Tensile Strength | 45.0 | MPa | ISO 527 |
Tensile Stress at Yield | 48.0 | MPa | ISO 527 |
Tensile Elongation at Yield | 3.0 | % | ISO 527 |
Tensile Elongation at Break | 7.0 | % | ISO 527 |
Impact Strength (Charpy, at 23°C) | no break | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Charpy, at 23°C) | 12.0 | kJ/m² | ISO 179/1eA |
Notched Impact (Charpy, at -40°C) | 5.0 | kJ/m² | ISO 179/1eA |
Value | Units | Test Method / Conditions | |
Density | 1070.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
Vicat B50 | 105.0 | °C | ISO 306 |
Value | Units | Test Method / Conditions | |
Moisture Content | max. 0.2 | % | — |
Value | Units | Test Method / Conditions | |
Flammability (0.75 m) | HB | class | UL 94 |
Flammability (1.5 mm) | HB | class | UL 94 |
Flammability (3.0 mm) | HB | class | UL 94 |
Glow Wire (GWFI, 650°C, 1mm) | Passed | — | DIN EN 60695 |
Glow Wire (GWFI, 650°C, 2mm) | Passed | — | DIN EN 60695 |
Glow Wire (GWFI, 650°C, 3mm) | Passed | — | DIN EN 60695 |
Value | Units | Test Method / Conditions | |
Melt Temperature | 200 - 240 | °C | — |
Mould Temperature | 50 - 80 | °C | — |
Value | Units | Test Method / Conditions | |
Melt Index (MVR) | 20.0 | cm³/10min | ISO 1133 |
MVR Temperature | 220.0 | °C | — |
MVR Load | 10.0 | kg | — |
Shrinkage (24h) | min. 0.6 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 80 °C in a dry air (dessiccant) dryer for 2-4 h
- 80 °C in an air circulating dryer for 3-6 h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.