Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Typical Properties
- Thermal Properties
- Processing Information (Injection Molding)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Tensile Modulus | 3800.0 | MPa | ISO 527 |
| Tensile Strength at Break | 75.0 | MPa | ISO 527 |
| Tensile Elongation at Break | 3.5 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | 50.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 7.0 | kJ/m² | ISO 179/1eA |
| Value | Units | Test Method / Conditions | |
| Density | 1260.0 | kg/m³ | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Dielectric Constant (εr) | 2.881 | — | — |
| Dissipation Factor (tan δ) (at 77GHz, 2.3 mm) | 0.006 | — | — |
| Moisture Content | max. 0.02 | % | — |
| Value | Units | Test Method / Conditions | |
| Vicat B50 | 145.0 | °C | ISO 306 |
| HDT / A (1.8 MPa) | 141.0 | °C | ISO 75-1/-2 |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 310 - 330 | °C | — |
| Mould Temperature | 80 - 130 | °C | — |
| Value | Units | Test Method / Conditions | |
| Melt Index (MVR) | 10.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 300.0 | °C | — |
| MVR Load | 1.2 | kg | — |
| Shrinkage (Lengthwise, 24h) | 0.3 - 0.5 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 0.3 - 0.5 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer 100-120 °C for 2-3 h
- Dependant on moisture content
- In an air circulatIng dryer 100-120 °C for 4-12 h
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.