Products

MOCOM Compounds ALTECH® PP-H FC 2020/100.01 is a polypropylene homopolymer reinforced with 20% glass fibers. It is suitable for injection molding at a melt temperature of 200-250°C and a mold temperature of 20-70°C, with features such as easy release (demolding), processing stability, and heat stability. This product is suitable for building and construction, packaging, food contact, household goods, thin walled parts, and kitchenware applications.

MOCOM Compounds ALTECH® PP-B A 4930/507 MR30 is a Polypropylene Heterophasic Copolymer containing 30% talcum and is specially designed for building and construction, machinery, and household goods applications. It is highly heat stabilized and has easy release (demolding) and slip agent properties. Pre-Drying Conditions should be carried out in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or in an air circulating dryer at 80-120°C for 2-4 hours. Processing Injection molding should be carried out at a melt temperature of 200-250°C and a mold temperature of 20-70°C. The product should be stored in a cool, dry place and should not be exposed to temperatures above 30°C.

MOCOM Compounds ALFATER® XL A90I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) suitable for processing injection molding. It has special features such as food contact compliance with EN 71-3, good colorability, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is used in a variety of market segments such as packaging, household goods, food processing industry, toys, and is suitable for injection molded parts such as seals, sealing lips, handles, soft touch elements, protection caps, caps/closures, containers, kitchen ware and 2K components with a maximum service temperature range ranging from -40-125°C.

MOCOM Compounds ALTECH® ABS A 1000/106 GY1116-20 is a pre-drying acrylonitrile/butadiene/styrene/copolymer with special features of easy flow and injection molding grade. It is typically used for sanitary articles, thin walled parts and other hygiene products and injection molded parts. For processing injection molding, the melt temperature should range from 200-240°C and the mold temperature should range from 50-80°C. The maximum moisture content should be less than 0.20%. For pre-drying conditions, the material should be dried in a dry air (dessiccant) dryer at 80°C for 2-4 hours, or in an air circulating dryer at 80°C for 3-6 hours depending on the moisture content.

MOCOM Compounds ALPERFORM® PE SL FC 0205-14 EA is a base polymer consisting of polyethylene low density with a filler/additive system of 2% lubricant. It has a minimum shelf life of 6 months and is dosage dependent on application and operational area, with 5% extrusion and 5% injection molding. It has special features including a slip agent, migration towards surface, food contact, high additive content, free from cadmium, lead and diarylide pigments, high dispersibility, and dust-free. It is suitable for use in polyethylene low density, polyethylene linear low density, polyethylene high density, ethylene acrylic acid copolymer, polypropylene, and polypropylene copolymer.

MOCOM Compounds ALCOM® HM PP 1000 18038 is a pre-drying condition polypropylene copolymer with a hygienic material filler/additive system and a silver, metallic color similar to RAL 9022 and RAL 9023. It has antibacterial properties according to ISO 22196, and is used in packaging, personal care, household goods, furniture, building, and construction applications such as sanitary articles, hygiene products, kitchen ware, functional components, housings, handles, containers, and caps/closures. Processing injection molding requires a melt temperature of 200-270°C and a mold temperature of 20-70°C.

MOCOM Compounds ALCOM® HM PP 3030 14029 is a polypropylene with 30% glass beads, hygienic material and gray color, featuring antibacterial properties according to ISO 22196. It is used in the packaging, personal care, household goods, furniture, building and construction markets. Typical applications include sanitary articles, hygiene products, domestic appliances, kitchen ware, functional components, housings, handles, fittings, containers, and caps/closures. Injection molding requires a melt temperature of 200-270°C and a mold temperature of 20-90°C, with a maximum moisture content of <0.10%.

MOCOM Compounds ALTECH® PP-H B 2012/500 GF12 is a Polypropylene Homopolymer pre-dried in an air circulating dryer or in a dry air (dessiccant) dryer. The melt temperature for processing injection molding is 200-250°C and the mold temperature is 20-70°C. The filler/additive system is 12% glass fibers, chemically coupled, heat stabilized, with an easy release (demolding) and slip agent. The market segment for this material is Furniture, building and construction, sport and leisure, and various. The application area is for household goods and domestic appliances and the typical applications are furniture profile and racking/shelving.

MOCOM Compounds ALTECH® ECO PC 2030/200 GF30 is a polycarbonate base polymer containing 30% glass fibers and recycled material, suitable for applications such as plugs/connectors, housings, and other household goods and energy management. To ensure optimal performance, pre-drying conditions require a dry air (dessiccant) dryer at 100-120°C for 2-3 h, or an air circulating dryer at 100-120°C for 4-12 h depending on moisture content, with a maximum moisture content of <0.02%.

MOCOM Compounds ALTECH® PP-H FC 2030/100 GF30 is a Polypropylene Homopolymer with a 30% glass fibers filler/additive system that provides high stiffness and is both processing and heat stabilized. It has a melt temperature of 200-250°C and a mold temperature of 20-70°C. This material is used in market segments such as packaging, personal care, machinery, electrical and electronic products, and is suitable for injection molded parts, electrical components, domestic appliances, and food contact items. Typical applications include kitchenware, functional components, and housings.

MOCOM Compounds ALCOM® HM PC+ABS 1000 AG 16152 is a hygienic material with antibacterial properties according to ISO 22196 in its natural color. It is designed for packaging, personal care, household goods, furniture, building and construction, and sport and leisure applications. It is suitable for injection molded parts such as sanitary articles, hygiene products, functional components, fittings, housings, clothing/fasteners, handles, profiles, etc.

MOCOM Compounds ALTECH® PP-H FC 4940/100 TV40 is a Polypropylene Homopolymer with a filler/additive system of 40% talcum which offers high stiffness, high heat stabilization, processing stabilization, and easy release (demolding). It is suitable for applications in the electrical and electronic, building and construction, and personal care market segments, such as kitchenware, functional components, housings, and other household goods. To ensure its optimal performance, pre-drying conditions should be completed, and the processing injection molding should be carried out at specific melt and mold temperatures.

MOCOM Compounds CELLIDOR® CP FC 400.01-08 is a base polymer composed of cellulose acetate propionate containing 8% phthalate-free plasticiser. It is suitable for injection molding parts, food contact and typical applications such as toothbrushes. Pre-drying conditions should be in an air circulating dryer at 60-90°C for 2-4 h, depending on moisture content, with a maximum moisture content of 0.15%. Processing should be injection molding with a melt temperature of 180-230°C and a mold temperature of 40-80°C. To ensure quality, keep it dry and protected from light.

MOCOM Compounds ALFATER® XL A70I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) with natural and bright inherent colors. It has excellent features for food contact, compliant with EN 71-3, good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It has an easy flow and is ideal for use in the packaging, household goods, food processing industry, toys, and injection molded parts such as seals, sealing lips, handles, soft touch elements, protection caps, caps/closures, containers, kitchenware, and 2K components.

MOCOM Compounds ALCOM® ABS 530/29 SV1462-06MCO is a pre-drying condition Acrylonitrile/Butadiene/Styrene/Copolymer with a metallic effect and special features of flow line optimization and easy flow. It is used for electrical and electronic, building and construction applications, such as household goods and housings. Its processing injection molding requires a melt temperature of 220-260°C and a mold temperature of 50-80°C.

MOCOM Compounds ALCOM® PBT 700/9 is a pre-drying conditions polybutylene terephthalate (PBT) with a matt (textured) surface, used in the building and construction, fixtures/fittings, and household goods. Typical applications include kitchenware, fixing elements, and more. Processing injection molding requires a melt temperature of 250-270°C and a mold temperature of 60-100°C. For proper use, keep in a dry, protected environment, not above 30°C, and pre-dry in a dry air (dessiccant) dryer at 100-120°C for 2-4 h, or in an air circulating dryer at 100-120°C for 4-8 h, depending on the moisture content.

MOCOM Compounds ALTECH® PP-H B 4910/500 MR10 is a polypropylene homopolymer that is processed using injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C, containing 10% talcum and being processing stabilized and easy release (demolding). It is used in the market segments of packaging, furniture, building and construction, and is suitable for injection molded parts, interior decoration/finishing. Typical applications include racking/shelving, household goods, housings, and functional components. To ensure a good quality of the product, it should be stored in a cool, dark place, not exceeding 30°C.

MOCOM Compounds ALCOM® ABS 530/50 HM is a white, pre-dried Acrylonitrile/Butadiene/Styrene/Copolymer with a hygienic filler/additive system and antibacterial properties according to ISO 22196. It has a melt temperature range of 220-260°C and a mold temperature range of 50-80°C. This product is suitable for injection molded parts such as sanitary articles, hygiene products, domestic appliances, functional components, handles, and fittings, and is used for applications in the packaging, personal care, household goods, furniture, building and construction, and sport and leisure markets. For optimal results, it should be stored in a dry, light-tightly sealed environment.

MOCOM Compounds ALCOM® HM PP 1000 AG 17005 is a pre-dried polypropylene copolymer containing a hygienic filler/additive system. The material is white, similar to RAL 9003, and has antibacterial properties according to ISO 22196. It is suitable for use in packaging, personal care, household goods, furniture, building, and construction applications. Injection molding of the material should be done with a melt temperature of 200-270°C and a mold temperature of 20-70°C. The material should be stored and handled in a tightly sealed environment.

MOCOM Compounds ALTECH® PP-H A 3030/100 GB30 is a Polypropylene Homopolymer with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It is composed of 30% glass beads and a special filler/additive system that includes easy release (demolding), slip agent, and heat stabilization. It is commonly used in building and construction, sport and leisure, and is suitable for injection molded parts and interior applications such as household goods, hygiene products, and housings. To ensure optimal performance, it should be stored in a dry and light-protected environment at a maximum temperature of 30°C.

MOCOM Compounds ALCOM® ABS 530/29 SV1245-05MCF is a pre-dried acrylonitrile/butadiene/styrene/copolymer with a metallic effect and low tendency to form flow lines. It has easy flow and is used in the electrical and electronic, building and construction markets, typically for housings. It must be melt-processed at temperatures between 220-260°C and molded at temperatures between 50-80°C.

MOCOM Compounds ALCOM® PP 620/10 GY1464-04MCF is a polypropylene heterophasic copolymer with a gray, metallic color. It features flow line optimization, low tendency to produce flow lines, slip agent, and heat stabilization. This product is suitable for applications such as household items and housings, and can be processed using injection molding with a melt temperature of 200-270°C and mold temperature 20-70°C.

MOCOM Compounds ALTECH® PP-B A 4430/100 MR30 is a polypropylene heterophasic copolymer with 20% chalk and 10% talcum. It is heat stabilized and has easy release (demolding) and processing stabilized characteristics. For injection molding, the melt temperature should be 200-250°C and the mold temperature should be 20-70°C. This material is applicable in the building and construction, sport and leisure markets and is typically used for housings and functional components. It should be stored in a dry, light-protected environment, not above 30°C, for optimal results.

MOCOM Compounds ALCOM® PP 620/6 UV GY1380-05MCO is a gray, metallic, flow line optimized, and UV stabilized polypropylene homopolymer. It is suitable for pre-drying conditions in an air circulating dryer at 80-100°C for 2-4 hours, or in a dry air (dessiccant) dryer at 80-100°C for 2-3 hours, depending on moisture content. For injection molding, a melt temperature of 200-270°C and a mold temperature of 20-70°C are recommended. Typical applications include housings for household goods. To ensure the best performance, it should be kept dry and protected from light, not exceeding 30°C.

MOCOM Compounds ALFATER® XL A60I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) of natural color, bright inherent color, and blue. Its pre-drying conditions include a dry air (dessiccant) dryer at 70-80°C for 2-4 hours, with a maximum moisture content of less than 0.10%. Special features of the polymer include being food contact compliant with EN 71-3, good colorability, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is used in the packaging, household goods, food processing industry, toys, and other areas for injection molded parts, such as seals, sealing lips, handles, soft touch elements, protection caps, caps/closures, containers, and kitchenware. It adheres to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALCOM® HM PA+ABS 1000 AG 16077 is a hygienic material with antibacterial features according to ISO 22196. It is white in color, similar to RAL 9003, and is mainly used for injection molded parts such as sanitary articles, hygiene products, functional components, fittings, housings, clothing/fasteners. It is also suitable for applications such as packaging, personal care, furniture, building and construction, and sport and leisure.

MOCOM Compounds ALTECH® PP-B B 2020/550 GF20 Pre-Drying Conditions is suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. The base polymer is a polypropylene copolymer with a filler/additive system of 20% glass fibers that is chemically coupled, processing stabilized, and has easy release (demolding) and heat stabilizing features. The market segment for this material is building and construction, packaging, and its application areas are household goods, power tools, exterior parts, and filter systems. Typical applications include racking/shelving, handles, housings, and functional components. For storage, this material should be kept dry, protected from light, and not above 30°C.

MOCOM Compounds ALCOM® ABS 530/29 HM-AG is a Pre-Drying Conditions Acrylonitrile/Butadiene/Styrene/Copolymer with a filler/additive system of hygienic material and light stabilizer, in white, similar to RAL 9003, gray, similar to RAL 7004, similar to RAL 7015, and similar to RAL 7043, with special features of antibacterial acc. to ISO 22196. It is marketed in segments such as packaging, personal care, household goods, furniture, building and construction, and sport and leisure, with application areas such as injection molded parts, and typical applications including sanitary articles, hygiene products, domestic appliances, functional components, handles, and fittings.

MOCOM Compounds ALTECH® PP-H A 3030/100 is a polypropylene homopolymer with a 30% glass bead filler/additive system, specially designed for easy release (demolding) and slip agent. It is suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C and can be used to create building and construction, sport and leisure applications, such as injection molded parts, interior and household goods, hygiene products, and housings. To ensure best results, pre-drying conditions should be in an air circulating dryer at 80-120°C for 2-4 h, or in a dry air (dessiccant) dryer at 80-120°C for 2-3 h.

MOCOM Compounds ALCOM® HM PP 3030 19024 is a white polypropylene homopolymer with a 30% glass bead filler/additive system that has antibacterial properties according to ISO 22196. It is widely used in markets such as packaging, personal care, household goods, building and construction, and sport and leisure. Typical applications include sanitary articles, hygiene products, domestic appliances, kitchen ware, functional components, housings, handles, fittings, containers, and caps/closures.

MOCOM Compounds Alperform® PE DET FC 0243-17 is a special type of polyethylene low density with a detectable taggant filler/additive system. It is suitable for use in various types of polyethylene and polypropylene, including low density, linear low density, and high density. This product is specifically designed for the food processing industry, with a special feature of metal detection and being detectable.

MOCOM Compounds ALCOM® PBT 700/9 BK2034-06MCS is a polybutylene terephthalate base polymer with a matt (textured) surface, used in building and construction, fixtures/fittings, household goods, and kitchenware for various applications. For optimal results, it should be pre-dried in a dry air (dessiccant) dryer at 100-120°C for 2-4 hours or in an air circulating dryer at 100-120°C for 4-8 hours, depending on moisture content. During processing, injection molding should be used with a melt temperature of 250-270°C and a mold temperature of 60-100°C. To ensure maximum product quality, the product should be protected from light at temperatures not exceeding 30°C.

MOCOM Compounds ALCOM® PP 620/2 SV1246-04MCO is a pre-drying condition polypropylene homopolymer with a metallic effect and optimized flow line for easy flow. It is used for applications such as housings in the household goods industry and is processed through injection molding with a melt temperature of 200-270°C and a mold temperature of 20-70°C.

MOCOM Compounds ALPERFORM® PE SL FC 0207-14 OA is a base polymer of polyethylene low density with a filler/additive system of 2% lubricant. It has special features of slip agent, migration towards the surface, food contact, high additive content, free from cadmium, lead and diarylide pigments, high dispersibility, and dust-free. It is suitable for injection molding with a melt temperature of 180-240°C and a mold temperature of 20-40°C, as well as extrusion dependent on the application and operational area. It is recommended for use in the food processing industry, household goods, packaging, and other injection molded, extruded, and blow molded parts.

MOCOM Compounds ALCOM® HM PA6 1000 AG UV 15046 WT1077-15 is a pre-dried polyamide 6-based material with an additive system containing a hygienic material and light stabilizer. It is white in color, similar to RAL 9003 and RAL 9016, and has antibacterial properties according to ISO 22196. This material is suitable for use in personal care, household goods, furniture, building and construction, and sport and leisure applications. When processing with injection molding, the recommended melt temperature should be between 250-270°C and the mold temperature should be between 40-80°C.

MOCOM Compounds CELLIDOR® CP 300-10 is a base polymer composed of cellulose acetate propionate, with a 10% phthalate-free plasticiser. It is suitable for use in the production of toothbrushes and other products. It should be pre-dried in an air circulating dryer at temperatures between 60-90°C for 2-4 hours, depending on the moisture content. For injection molding, the melt temperature should be between 180-230°C and the mold temperature should be between 40-80°C. No extra sentence required.