Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Processing Information (Injection Molding)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus | 1500.0 | MPa | ISO 178 |
Flexural Stress (3.5% Strain) | 40.0 | MPa | ISO 178 |
Tensile Modulus | 1500.0 | MPa | ISO 527 |
Tensile Stress at Yield | 36.0 | MPa | ISO 527 |
Tensile Elongation at Yield | 4.2 | % | ISO 527 |
Tensile Elongation at Break | 16.0 | % | ISO 527 |
Impact Strength (Charpy, at 23°C) | 200.0 | kJ/m² | ISO 179/1eU |
Impact Strength (Charpy, at -40°C) | 130.0 | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Charpy, at 23°C) | 25.0 | kJ/m² | ISO 179/1eA |
Notched Impact (Charpy, at -40°C) | 7.5 | kJ/m² | ISO 179/1eA |
Ball Indentation Hardness (H132/30) | 73.0 | MPa | ISO 2039-1 |
Value | Units | Test Method / Conditions | |
Density | 1190.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
Vicat B50 | 88.0 | °C | ISO 306 |
HDT / A (1.8 MPa) | 92.0 | °C | ISO 75-1/-2 |
Value | Units | Test Method / Conditions | |
Melt Temperature | 180 - 230 | °C | — |
Mould Temperature | 40 - 80 | °C | — |
Value | Units | Test Method / Conditions | |
Melt Index (MVR) | 6.0 | cm³/10min | ISO 1133 |
MVR Temperature | 210.0 | °C | — |
MVR Load | 2.16 | kg | — |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer 50-70 °C for 2-3 h
- In an air circulatIng dryer 50-80 °C for 2-4 h
Storage & Handling
- Storage Conditions
Store in dry, protected from light.