Products

MOCOM Compounds ALCOM® LB PC+ABS 1000 19037 RD1036-19 is an injection molding grade polymer blend of polycarbonate and Acrylonitrile Butadiene Styrene that is highly reflective and opaque. It is used in automotive, electrical and electronic, and lighting market segments for applications such as light guides and reflectors. During processing injection molding, a melt temperature of 250-280°C and mold temperature of 70-100°C should be maintained. After processing, the material should be stored in a dark environment to protect it from light.

MOCOM Compounds ALFATER® XL A40I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) polymer with natural color and black options. It has good recovery, weathering, chemical, ozone, hot air, and hydrolysis resistant properties. It is best suited for injection molded parts, seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, plugs, fasteners & connectors, and 2K components. Additionally, it has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer.

MOCOM Compounds Alcom® PWL 10/1.1 WT1302-05LB is a polycarbonate injection molding grade material containing a special filler system of 15% that provides highly reflective and opaque properties. It is UV stabilized and provides easy release during demolding, and is often used in the automotive industry for lighting and light blocking components, such as light guides and reflectors.

MOCOM Compounds ALTECH® PP-B A 1000/120 UV is a polypropylene heterophasic copolymer with UV stabilized, heat stabilized, and processing stabilized properties. It is suitable for injection molding with a melt temperature of 200-240°C and a mold temperature of 20-70°C and is commonly used for automotive exterior parts and functional components, such as housings. Pre-drying is recommended in a dry air (dessiccant) dryer at 80-120°C for 2-3 h, or in an air circulating dryer at 80-120°C for 2-4 h.

MOCOM Compounds ALCOM® PC 740/4 CC1122-05LD is a polycarbonate-based polymer with a special filler/additive system that provides high light transmission and light scattering as well as good flow. It is approved by GS93016 and is typically used in automotive and lighting applications such as lamp covers, display elements, and operating elements. For injection molding, the recommended melt temperature is between 270-310°C and the mold temperature should be between 80-110°C. This product should be stored in a dry place and protected from light.

MOCOM Compounds ALTECH® ECO PP-B 4920/570 MR 20 is a polypropylene heterophasic copolymer containing 20% talcum, slip agent, easy release (demolding), and heat stabilized with special features containing recycled material. It is suitable for the machinery market segment and typical applications such as air ducts, housing, and unpainted automotive trim parts for various injection molding.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 17132 WT1125-17 is a polycarbonate base polymer with a special filler/additive system, designed for the Automotive and Lighting market segments. It is typically used for lamp covers, display elements, and operating elements, and has GS93016 approvals. Pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 h or 120°C in an air circulating dryer for 4-12 h with a maximum moisture content of <0.02%. For injection molding, a melt temperature of 270-310°C and a mold temperature of 80-110°C should be used.

MOCOM Compounds ALCOM® PC 740/4 CC1121-05LD is a polycarbonate base polymer containing a special filler/additive system for light scattering, high light transmission, and easy flow. It is approved for GMW15702 and GS93016, and is typically used for lamp covers, display elements, and operating elements in the automotive and lighting markets. For injection molding, the melt temperature should be 270-310°C and the mold temperature should be 80-110°C. To ensure optimal performance, the product should be stored in a dry place, away from light.

MOCOM Compounds ALCOM® LDDC PC 1000 UV BK1104-20 is a polycarbonate-based polymer with a special filler and UV stabilized additive system, suitable for automotive and lighting applications. It is used for creating light transparent components and black panel technology, with typical applications including display elements and operating elements.

MOCOM Compounds ALCOM® PC 740/4 UV WT1280-04LD is a polycarbonate base polymer with a special filler/additive system that offers high light diffusion, good flow, and UV stabilization. It is suitable for applications such as lamp covers, display elements, and operating elements in the automotive and lighting markets.

MOCOM Compounds ALCOM® PBT 700/2 WT31-956LB is a Polybutylene Terephthalate base polymer with a special filler/additive system that provides high stiffness and a highly reflective, opaque finish. It is used in the automotive and various other market segments for applications such as lighting, light blocking components, light guides, and reflectors. It can be processed for injection molding with a melt temperature of 250-270°C and a mold temperature of 80-120°C. For optimal performance, it should be stored in a dry and light-protected environment.

MOCOM Compounds Altech® PP-H A 2040/556 GF40 CP is a polypropylene homopolymer injection molding grade with 40% glass fibers, heat-stabilized, processing-stabilized, low emission, and chemically coupled. It is part of the Automotive market segment and is used to make profiles and bezels. It should be stored in a dry and light-protected environment at not more than 30°C.

MOCOM Compounds ALCOM® LD PC 2020 UV 17027 WT1022-17 is a polycarbonate base polymer with a special filler/additive system of 20% glass fibers that is UV stabilized, providing high light transmission, light scattering, and high light diffusion. For optimal performance, it should be pre-dried at 120°C in a dry air (dessiccant) dryer for 2-3 hours and with a maximum moisture content of 0.02%. This material is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements. It should be processed with a melt temperature of 290-320°C and a mold temperature of 80-130°C.

MOCOM Compounds ALCOM® PC 740/4 UV WT1082-08LD2 is a polycarbonate-based polymer with a special filler/additive system that is UV stabilized, translucent, light-scattering, and has high light diffusion and good flow. It is typically used in automotive and lighting applications for lamp covers, display elements, and operating elements. It has been approved by GMW15702, GM3013, and GS93016 and should be processed using injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® PC740/26 UV WT1407-04LB is a high heat polycarbonate base polymer with a special filler/additive system that is UV stabilized and highly reflective, opaque, and easy to flow. It is suitable for automotive and lighting applications such as light guides, reflectors, and light blocking components. During processing injection molding, the melt temperature should be between 330-340°C and the mold temperature should be between 120-140°C.

MOCOM Compounds ALFATER® XL A60I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) base polymer that is used for injection molding applications. It is available in natural color or black and has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications. Typical applications include seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners and connectors, and 2K components. It also has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALCOM® PC 740/4 UV GY1320-04LD is a polycarbonate base polymer with a special filler/additive system that features light scattering, high light diffusion, easy flow, and UV stabilization. It is suitable for automotive, lighting, and lighting-related applications such as lamp covers, display elements, and operating elements. It is approved by GS93016 and should be processed through injection molding at a melt temperature of 270-310°C and a mold temperature of 80-110°C. For optimum performance, it should be stored in a dry and light-protected environment with the lid securely closed.

MOCOM Compounds ALTECH® PP-B B 4915/500 MR15 is a heat-stabilized and processing-stabilized polypropylene heterophasic copolymer blended with 15% talcum. It is suitable for injection molding with a melt temperature between 200-250°C and a mold temperature between 20-70°C, making it ideal for applications in the automotive industry for interior decoration/finishing, clothing/fasteners, and functional components, housings. Pre-drying should be done in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or in an air circulating dryer at 80-120°C for 2-4 hours. This product should be stored in a dry and light-protected environment not exceeding 30°C.

MOCOM Compounds ALFATER® XL A40I 4GP0000 is a thermoplastic vulcanisate (PP+EPDM) suitable for injection molding. It has a melt temperature of 190-220°C and a mold temperature of 10-60°C with injection speed in the middle to high range, back pressure (hydraulic) greater than 3 bar and a holding pressure of 50-70% of injection pressure. It has a natural color with bright inherent color and is low emission, with good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is used in the automotive, building and construction, electrical and electronic, sport and leisure, and furniture markets, and can be used for injection molded parts such as seals, sealing lips, handles, racking/shelving, soft touch elements, impact protection/shock absorbers, protection caps, thin walled parts, profiles, cable ducts, and two-component components.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 16059 CC1059-16 is a polycarbonate base polymer containing a special filler/additive system, UV stabilized, which provides high light transmission, light scattering, and high light diffusion, with easy flow. It is suitable for automotive and lighting market segments and is typically used for light diffusing panels, light diffusers, and lamp covers.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 18075 CC1088-18 is a polycarbonate base polymer with a special filler/additive system providing features such as being translucent, having high light transmission, high light diffusion, light scattering, easy release (demolding), and good flow. It is processing stabilized and UV stabilized, making it suitable for injection molding with melt temperatures of 270-310°C and mold temperatures of 80-110°C. This material is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements, and is GS93016 approved.

MOCOM Compounds ALTECH® ECO PC 1000/170 is a polycarbonate base polymer that contains recycled material and has easy release (demolding) properties. It is suitable for injection molding with a melt temperature range of 270-310°C and a mold temperature range of 80-110°C, making it appropriate for automotive, lighting, and various other market segments. Commonly used for housing, automotive trim unpainted, and various other fixtures and fittings applications.

MOCOM Compounds ALCOM® PC 740/4 UV WT1445-06LD is a polycarbonate base polymer with a special filler/additive system for light scattering, UV stabilization, and easy flow. It is used for lamp covers, display elements, and operating elements in the automotive and lighting market segments, and is approved by GS93016.

MOCOM Compounds ALCOM® PC 740/4 GY1152-05LD is a polycarbonate base polymer with a special filler/additive system that provides light scattering and high light diffusion, making it translucent and with good flow. It is suitable for Automotive and Lighting market segments and typical applications include lamp covers, display elements, and operating elements. It has been approved by GS93016 and should be processed with a melt temperature of 270-310°C and mold temperature of 80-110°C.

MOCOM Compounds ALTECH® PP-H A 2020/750 GF20 CP is a base polymer of Polypropylene Homopolymer with 20% glass fibers and filler/additive system. It is processing stabilized, high stiffness, chemically coupled, and heat stabilized. It has a melt temperature of 200-250°C and mold temperature of 20-70°C and is suitable for the electrical and electronic, building and construction, and automotive market segments. Typical applications include housings, fixing elements, functional components, and radiator grilles.

MOCOM Compounds ALCOM® LD PC 1000 UV 14095 GY1198-14 is a polycarbonate-based resin with a special filler/additive system that is UV stabilized and translucent, with high light diffusion and good flow. It has been approved by GS93016 and is suitable for injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C. It is suitable for a variety of applications such as lamp covers, display elements and operating elements in the automotive and lighting market segments.

MOCOM Compounds ALCOM® POM 770/1 GF20 PTFE15 is a Polyoxymethylene Copolymer containing 20% glass fibers and 15% PTFE. It has improved sliding/wear and heat-stabilized properties, making it suitable for automotive and machinery applications such as gear wheels, roller bearings, and functional components, bearings, and sliding elements. Processing for injection molding is at a melt temperature of 190-230°C and a mold temperature of 60-120°C.

MOCOM Compounds ALCOM® PC 740/4 UV RD1231-11LD3 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and translucent with light scattering and good flow. It is used in the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements. It has GS93016 approvals and must be protected from light. For processing injection molding, the melt temperature should be 270-310°C and the mold temperature should range from 80-110°C.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 15015 CC1026-15 is a polycarbonate base polymer with a special filler/additive system, UV stabilized for translucent, light scattering characteristics dependent on wall thickness. It is suitable for use in the automotive and lighting markets for applications such as lamp covers, display elements, and operating elements, and is approved by GS93016.

MOCOM Compounds ALCOM® LD2 PC 9000 UV 14019 WT1030-14 is a polycarbonate-based polymer with a special filler/additive system that is UV-stabilized and has translucent, light scattering, and high light diffusion properties. It is suitable for automotive, lighting, and other light transparent components and injection molded parts, such as lamp covers, display elements, and operating elements. For processing injection molding, melt temperatures should be between 270-310°C and mold temperatures should be between 80-110°C.

MOCOM Compounds ALCOM® POM 770/1 PTFE18 SI2 is a polyoxymethylene copolymer with a 20% PTFE/Silicone filler/additive system designed for improved sliding and wear in the automotive and machinery market segments. Typical applications include functional components, bearings, and sliding elements. It can be processed by injection molding with a melt temperature of 180-220°C and a mold temperature of 60-100°C. Pre-drying conditions include either a dry air (desiccant) dryer for 2-3 hours at 100-110°C, or an air circulating dryer for 3-5 hours at 100-110°C, depending on the moisture content.

MOCOM Compounds ALCOM® PC 740/4 UV WT1296-07LD is a polycarbonate polymer with a special filler/additive system that is UV stabilized, has high light transmission and light scattering, and has good flow. It is used in the automotive and lighting industries for applications such as lamp covers, display elements, and operating elements. It has GS93016 approvals and is recommended to be stored dry and in the dark. For injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C. It should also be noted that the recommended injection pressure is between 80-150 bar.

MOCOM Compounds ALCOM® LDDC PMMA 1000UV18123 BK1016-11 is a translucent, UV stabilized Polymethylmethacrylate polymer used for Automotive, Lighting, and interior decoration/finishing, light transparent components, and Black Panel-Technology applications such as lamp covers, display elements, and operating elements. Pre-drying conditions involve 80°C in a dry air (dessiccant) dryer for 3-4 hours and 80°C in an air circulating dryer for 4-6 hours with a maximum moisture content of less than 0.02%. For processing injection molding, the melt temperature should be between 220-270°C and the mold temperature should be between 50-80°C. It should be protected from light.

MOCOM Compounds ALCOM® PC 740/4 UV WT1240-10LD is a polycarbonate-based material with a special filler/additive system designed for high light transmission, light scattering, and UV stability. It is suitable for Automotive and Lighting market segments for applications such as lamp covers, display elements, and operating elements. Processing Injection molding involves a melt temperature of 270-310°C and a mold temperature of 80-110°C. Pre-Drying Conditions require 120°C in a dry air (dessiccant) dryer for 2-4 hours and 120°C in an air circulating dryer for 4-12 hours. It has been approved by GS93016 and should be stored in a dry, light-protected environment.

MOCOM Compounds ALCOM® PC 740/4 UV WT1306-07LD is a polycarbonate base polymer with a special filler/additive system that provides high light transmission and light scattering, as well as good flow and UV stabilization. It is used in the automotive and lighting markets mainly for applications such as lamp covers, display elements and operating elements, and is approved by GS93016.

MOCOM Compounds ALCOM® HTC 300/1 GY1055-10LD is a high-temperature copolyester base polymer with a special filler/additive system that has translucent, light-scattering, and high light diffusion properties. It is typically used for automotive and lighting applications such as lamp covers, display elements, and operating elements. To ensure the best performance, it should be stored in a dry, light-protected environment. When processing injection molding, a melt temperature of 260-280°C and a mold temperature of 50-70°C should be used.