Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Optical Properties
- Processing Information (Injection Molding)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Flexural Modulus | 2450.0 | MPa | ISO 178 |
| Flexural Stress (3.5% Strain) | 76.0 | MPa | ISO 178 |
| Tensile Modulus | 2400.0 | MPa | ISO 527 |
| Tensile Stress at Yield | 66.0 | MPa | ISO 527 |
| Tensile Elongation at Yield | 6.0 | % | ISO 527 |
| Tensile Elongation at Break | 80.0 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | no break | kJ/m² | ISO 179/1eU |
| Impact Strength (Charpy, at -40°C) | no break | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 10.0 | kJ/m² | ISO 179/1eA |
| Notched Impact (Charpy, at -40°C) | 10.0 | kJ/m² | ISO 179/1eA |
| Value | Units | Test Method / Conditions | |
| Density | 1190.0 | kg/m³ | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Vicat B50 | 142.0 | °C | ISO 306 |
| HDT / A (1.8 MPa) | 124.0 | °C | ISO 75-1/-2 |
| Value | Units | Test Method / Conditions | |
| Moisture Content | max. 0.02 | % | — |
| Value | Units | Test Method / Conditions | |
| Total Transmission T(Y) (d=1,0mm, A, 2°) | 49.0 | % | ISO 13468 |
| Total Transmission T(Y) (d=2,0mm, A, 2°) | 27.0 | % | ISO 13468 |
| Total Transmission T(Y) (d=3,0mm, A, 2°) | 15.0 | % | ISO 13468 |
| Total Transmission T(Y) (d=4,0mm, A, 2°) | 8.5 | % | ISO 13468 |
| Haze T(Y) (d=1.0 mm, A, 2°) | 5.0 | % | ISO 13468 |
| Haze T(Y) (d=2.0 mm, A, 2°) | 8.0 | % | ISO 13468 |
| Haze T(Y) (d=3.0 mm, A, 2°) | 10.0 | % | ISO 13468 |
| Haze T(Y) (d=4.0 mm, A, 2°) | 13.5 | % | ISO 13468 |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 270 - 310 | °C | — |
| Mould Temperature | 80 - 110 | °C | — |
| Value | Units | Test Method / Conditions | |
| Melt Index (MVR) | 20.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 300.0 | °C | — |
| MVR Load | 1.2 | kg | — |
| Shrinkage (24h) | 0.6 - 0.9 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Product Performance Characteristics
Alcom® LDDC – Deep Color
- Deep Color for illuminated parts
- Optical appearance in deep colors (e.g. “Piano Black”) when backlight LEDs switched off
- Optimized transmission of (colored) LED light
- Symbols or displays visible, when LEDs are switched on
- No visual color shift of transmitted light
- Transmission with/without homogeneous scattering
- Tailor made: Color, transmission, haze, half power angle
- Suited for illuminated applications
- Seamless user interfaces
- Decorative elements, consoles
- Displays, touch sensitive surfaces
Example: Cover Lens for Displays
- Transparent black material covers display unit
- Mold-in-Color user surface
- Display on: clear transmission
- Display off: deep gloss black panel
- Electronics not visible
Example: Classic Ambient Lighting
- Piano black diffusing lens
- Homogeneous light output
- Established assembly concepts
- Can be implemented into seamless designs
Also, for ambient lighting of larger areas, e.g.
- Illuminated door trim
- Illumination of center console
- Deep Color for illuminated parts
- Pre-Drying Conditions
- 120 °C in a dry air (dessiccant) dryer for 2-4 h
- 120 °C in an air circulating dryer for 4-12 h
Storage & Handling
- Storage Conditions
Store in dry, protected from light.