Products

MOCOM Compounds ALFATER® XL A85E 2GP0000 is a Thermoplastic Vulcanisate (PP+EPDM) with natural color, black color, and high viscosity. It has good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is used in the Automotive, building and construction, Machinery, electrical and electronic, and Furniture industries for extruded parts, blow molded parts, and coextrusion. It can be used for profile, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air duct, as well as 2K components. Its adhesion to Polypropylene Homopolymer, Polypropylene Copolymer, polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer has been tested generally.

MOCOM Compounds Alcom® TCD PA6 5060 FR 15090 is a polyamide 6 (PA6) material that contains a special filler system, making it thermally conductive, electrically insulating, and halogen-free flame retardant. It is also opaque and heat stabilized, making it suitable for use in radiator systems and cooling systems in the automotive, machinery, electrical and electronic, and lighting industries.

MOCOM Compounds Alcom® TCD PA66 5050 14016 is a thermal conductive and electrically insulating polyamide 66 material that is heat stabilized. It is used in a variety of market segments including automotive, machinery, electrical and electronic, and lighting. Typical applications include radiator systems, cooling systems, housings, functional components, plugs/connectors, and lamp sockets.

MOCOM Compounds ALTECH® ECO PA66 2035/500 GF35 is a heat-stabilized polyamide 66 with a filler/additive system of 35% glass fibers containing recycled material. It is suitable for use in automotive and other various market segments, such as cooling systems, chassis, steering, and radiator systems. Typical applications include oil pump parts, housing, automotive trim unpainted, oil pans/sumps, and bearing cages.

MOCOM Compounds ALTECH® ECO PA66 2030/116.01 GF30 is an impact-modified and processing-stabilized polyamide 66 resin with 30% glass fibers and recycled material. It is suitable for applications such as oil pump parts, housings, and automotive trim unpainted, cooling systems, chassis, steering, and impact protection/shock absorbers. For injection molding, the melt temperature should be between 280-300°C and the mold temperature should be between 80-120°C. It is suitable for the automotive market segment and provides excellent mechanical properties.

MOCOM Compounds ALFATER® XL A90E 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) that provides good weathering, chemical, ozone, and hot air resistance. It is suitable for extruded parts, blow molded parts, coextrusion, profiles, seals, sealing lips, conduits, tubes, cable guides, cable jacketing, bellows, air ducts, and 2K components, and can be used in the automotive, building and construction, machinery, electrical and electronic, and furniture industries. It has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALTECH® ECO PA66 2020/116 GF20 IM is an impact-modified, recycled material containing polyamide 66 with 20% glass fibers. It is suitable for a variety of applications including oil pump parts, housing, automotive trim unpainted, cooling systems, filter systems, and transport systems. To ensure optimal results, pre-drying is recommended at 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content, with a maximum moisture content of 0.15%. When processing with injection molding, melt temperature should range between 280-300°C, and mold temperature should range between 80-120°C. This material is suitable for automotive, building and construction, and various other market segments.

MOCOM Compounds ALFATER® XL ECO D40 2GP0000 is a thermoplastic vulcanisate polymer (PP+EPDM) in black color with polymer recyclate special features, suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications. Pre-drying conditions should be in a dry air (dessiccant) dryer at 70-80°C for 2-4 hours, with a maximum moisture content of <0.10%. Processing extrusion requires a melt temperature of 190-230°C and an indie temperature of 190-220°C.

MOCOM Compounds ALFATER® XL A60E 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) with high viscosity, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for use in automotive, building and construction, machinery, electrical and electronic, and furniture applications, such as for extruded parts, blow molded parts, coextrusion, profiles, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air ducts. It also has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. All of these properties make it a versatile material for various applications.

MOCOM Compounds Alcom® TCD PA6 5070 FR 15021 is a polyamide 6-based polymer with a special filler that makes it thermally conductive, electrically insulating, heat stabilized, and halogen-free flame retardant. It is suitable for a variety of markets such as Automotive, Machinery, electrical and electronic, and Lighting, and is particularly ideal for radiator systems and cooling systems. Typical applications include housings, functional components, plugs/connectors, and lamp sockets.

MOCOM Compounds ALCOM® PA66 910/32.1 TCE5 is a polyamide 66 base polymer with a special filler and additive system that provides thermal and electrical conductivity, as well as heat stabilization. It is mainly used for automotive, machinery, electrical and electronic, and lighting applications like electrical components, radiator systems, and cooling systems such as housings and functional components. To ensure optimal performance, it should be pre-dried at 80°C in a dry air (dessiccant) dryer for 2-12 hours, with a maximum moisture content of 0.12%. For injection molding, the melt temperature should be between 300-320°C and the mold temperature should be between 100-130°C.

MOCOM Compounds ALTECH® PP-H A 2020/750 GF20 CP is a base polymer of Polypropylene Homopolymer with 20% glass fibers and filler/additive system. It is processing stabilized, high stiffness, chemically coupled, and heat stabilized. It has a melt temperature of 200-250°C and mold temperature of 20-70°C and is suitable for the electrical and electronic, building and construction, and automotive market segments. Typical applications include housings, fixing elements, functional components, and radiator grilles.

MOCOM Compounds ALTECH® PP-H A 2020/750 GF20 is a Polypropylene Homopolymer filled with 20% glass fibers and is processing stabilized, heat stabilized, and chemically coupled. It is suitable for applications in electrical and electronic, building and construction, and automotive markets such as housings, fixing elements, functional components, radiator grilles, electrical components, exterior parts, and cooling systems. Pre-drying conditions should be done in a dry air (dessiccant) dryer or an air circulating dryer at 80-120°C for 2-4 hours. Processing injection molding should be done with a melt temperature of 200-250°C and mold temperature of 20-70°C.

MOCOM Compounds ALTECH® ECO PA66 2030/116 GF30 is a polyamide 66 base polymer with 30% glass fibers, impact modified and containing recycled material, specifically designed for automotive and other market segments. It is suitable for applications such as cooling systems, chassis, steering, oil pump parts, housings, automotive trim unpainted, impact protection/shock absorbers, and more. During processing, injection molding should be done with a melt temperature of 280-300°C and a mold temperature of 80-120°C.

MOCOM Compounds ALTECH® PP-H A 4920/109 TV20 is a polypropylene homopolymer with 20% talcum, which is heat stabilized, highly stiff, UL-listed, and processing stabilized for easy demolding. It is used in the electrical and electronic, automotive markets for applications such as electrical components, interior decoration/finishing, exterior parts, housings, functional components, automotive powertrain parts, radiator grilles, and fans.

MOCOM Compounds ALFATER® XL A80E 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a black color and high viscosity. It features good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for use in the automotive, building and construction, machinery, electrical and electronic, and furniture sectors and can be used for extruded parts, blow molded parts, coextrusion, profile, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air ducts. Additionally, it has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL A65E 2GP0000 WT1159-17 is a thermoplastic vulcanisate (PP+EPDM) available in natural, white, and black colors. It has high viscosity and superior resistance to weathering, chemicals, ozone, hot air, and hydrolysis. This material is widely used in the automotive, building and construction, machinery, electrical and electronic, and furniture industries for applications such as profiles, seals, sealing lips, conduits, tubes, cable guides, cable jacketing, bellows, and air ducts, as well as 2K components. It offers excellent adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL D50E 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a black color, high viscosity, and excellent weathering, chemical, ozone, and hot air resistance. It is suitable for pre-drying in a dry air (dessiccant) dryer at 70-80°C for 2-4 hours. It is recommended for use in automotive, building and construction, machinery, electrical and electronic, and furniture applications, and is suitable for extruded parts, blow molded parts, and coextrusion. Typical applications include profiles, seals, sealing lips, conduit, tubes, cable guides, cable jacketing, bellows, air ducts, and 2K components. It can adhere to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALTECH® ECO PP H 4920/570 MR 20 is a polypropylene homopolymer containing 20% talcum, antioxidant, and long-term heat-stabilized processing stabilizer with recycled material. It requires pre-drying conditions in a dry air (dessicant) dryer at 80-120°C for 2-3 hours, or in an air circulating dryer at 80-120°C for 2-4 hours. For injection molding, its melt temperature should be between 200-240°C, and its mold temperature should be between 20-70°C. Typical applications include air duct, housing, and automotive trim unpainted, among various others.

MOCOM Compounds ALFATER® XL A65E 2GP0000 is a Thermoplastic Vulcanisate (PP+EPDM) with a natural color, white, or black. It has high viscosity and good weathering, chemical, ozone, hot air, and hydrolysis resistance. It is suitable for use in the automotive, building and construction, machinery, electrical and electronic, and furniture market segments for extruded parts, blow molded parts, coextrusion profiles, seals, sealing lips, conduits, tubes, cable guides, cable jacketing, bellows, air ducts, and 2K components.

MOCOM Compounds ALFATER® XL D40E 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a black or natural color. It has high viscosity and good resistance to weathering, chemicals, ozone, hot air, and hydrolysis. It is suitable for use in the automotive, building and construction, machinery, electrical and electronic, and furniture industries for extruded parts, blow molded parts, coextrusion, profiles, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air duct. Additionally, it has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALTECH® PA6 B 2025/309 GF25 is a polyamide 6 base polymer with 25% glass fiber filler/additive system. It is suitable for injection molding, with melt temperatures of 270-290°C and mold temperatures of 80-100°C, and has special features such as easy release (demolding), easy flow, processing stabilization and heat stabilization. It is suitable for the automotive, machinery, building and construction market segments, and can be used for injection molded parts, exterior parts, housings, functional components and air ducts.

MOCOM Compounds ALTECH® PA6 A 2030/606 GF30 is a polyamide 6-based material with 30% glass fibers that is nucleated and processing-stabilized for easy release (demolding). It is suitable for injection molding applications with a melt temperature of 270-290°C and a mold temperature of 80-100°C. This material is primarily used in the automotive market for cooling system, engine and drive system components, such as oil pump parts, housings, and functional components.

MOCOM Compounds ALTECH® PA6 A 4030/109 MR30 is a Polyamide 6 grade containing a 30% mineral filler/additive system and heat stabilized for improved flow characteristics during injection molding. It is suitable for a wide range of automotive, machinery, electrical and electronic, furniture, building and construction, sport and leisure, packaging, medical/personal care, lighting, and information technology applications. Typical applications include racking/shelving, airbag components, batteries, fixing elements, power drills, clips, roof boxes and more. Processing conditions should include a melt temperature of 270-290°C and a mold temperature of 80-100°C for optimal performance, while pre-drying conditions should include 80°C in a dry air (dessiccant) dryer for 2-12 hours, depending on the moisture content.

MOCOM Compounds ALCOM® PA66 910/32.1 GF8 TCE8 is a polyamide 66 base polymer with a special filler/additive system, including 8% glass fibers, thermal conductive, electrically conductive, and heat stabilized. It is commonly used in the automotive, machinery, electrical and electronic, and lighting industries, and typical applications include housings and functional components. Processing injection molding requires a melt temperature of 300-320°C and a mold temperature of 100-130°C.

MOCOM Compounds ALTECH® PA6 A 2050/560 GF50 is a polyamide 6 reinforced with 50% glass fibers. It is a high heat stabilized, easy release (demolding), easy flow, injection molding grade suitable for automotive, electrical and electronic applications, such as engine and drive systems, exterior parts, electrical components, interior decoration/finishing, and injection molded parts. Typical applications include functional components, different automotive powertrain parts, and air ducts.

MOCOM Compounds ALTECH® PA6 A 2330/500 is a heat stabilized, improved surface appearance and easy release polyamide 6 with a 20% glass fiber and 10% glass bead filler/additive system. It is suitable for many market segments, such as automotive, machinery, building and construction, and can be used for injection molded parts, electrical components, and exterior parts. Typical applications include air ducts, housings, and functional components.

MOCOM Compounds ALTECH® PA6 A 2035/109 GF35 is a polyamide 6 based polymer with a 35% glass fiber filler/additive system that is heat stabilized, easy to release (demold) and processing stabilized. Common market segments utilizing this material include automotive, electrical and electronic, and building and construction. Typical applications include functional components, automotive powertrain parts, fans, housings, and electrical components.

MOCOM Compounds ALTECH® PA6 A 2050/100 GF50 is a heat stabilized, easy-release (demolding) injection molding grade that is nucleated and processing stabilized with 50% glass fibers. Pre-drying conditions should be 80°C in a dry air (dessiccant) dryer for 2-12 hours, depending on moisture content, with a maximum moisture content of less than 0.15%. Processing injection molding should be with a melt temperature of 270-290°C and a mold temperature of 80-100°C. It is suitable for machinery, automotive, electrical and electronic applications such as housings, different automotive powertrain parts, functional components, protection-strips, and air ducts.

MOCOM Compounds ALCOM® PA66 910/32.1 TCE2 is a special filler-based polyamide 66 with thermal and electrical conductivity, as well as heat stabilization, making it suitable for applications such as electrical components, radiator systems, cooling systems, housings, and functional components. For injection molding, the melt temperature should be 300-320°C and the mold temperature should be 100-130°C. This product is suitable for the automotive, machinery, electrical, electronic, and lighting markets.

MOCOM Compounds ALTECH® PA66 A 1000/501 IM is a high impact modified, heat stabilized polyamide 66 perfect for automotive applications such as housings, injection molded parts, and air fans. During processing injection molding, it should be heated to a melt temperature of 270-290°C and a mold temperature of 40-80°C.

MOCOM Compounds ALTECH® PA6 A 3230/100 GF10 GB20 is a heat-stabilized, easy-flow, easy-release (demolding) and fast-solidifying polyamide 6-based compound with a filler/additive system of 20% glass beads and 10% glass fibers. It is suitable for exterior parts and injection-molded parts and is commonly used in automotive, building, and construction applications for functional components and housings.

MOCOM Compounds ALTECH® ECO PA66 2030/310 GF30 IM is a polyamide 66 resin with 30% glass fibers and is high heat stabilized and impact modified. It also contains recycled material, making it an ideal choice for automotive, machinery, and different automotive powertrain parts, housings, fans, and machinery components. To ensure quality and optimal performance, injection molding should be done with a melt temperature of 280-300°C and mold temperature of 80-120°C. Moreover, the product should be kept in the dark and should not be stored above 30°C.