Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Flammability
- Processing Information (Injection Molding)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Flexural Modulus | 6500.0 | MPa | ISO 178 |
| Flexural Strength | 80.0 | MPa | ISO 178 |
| Tensile Modulus | 6000.0 | MPa | ISO 527 |
| Tensile Strength at Break | 50.0 | MPa | ISO 527 |
| Tensile Elongation at Break | 1.5 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | 10.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 2.5 | kJ/m² | ISO 179/1eA |
| Value | Units | Test Method / Conditions | |
| Density | 1340.0 | kg/m³ | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| HDT / A (1.8 MPa) | 220.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point) | 263.0 | °C | ISO 11357 |
| Thermal Conductivity (integral) | 4.5 | W/(m K) | ISO 22007-2 |
| Specific Heat Capacity | 1.45 | J/gK | — |
| Thermal Conductivity (in-plane) | 8.0 | W/(m K) | ASTM E 1461 |
| Thermal Conductivity (through-plane) | 2.0 | W/(m K) | ASTM E 1461 |
| Value | Units | Test Method / Conditions | |
| Moisture Content | max. 0.12 | % | — |
| Value | Units | Test Method / Conditions | |
| Surface Resistance | max. 5000 | Ohm | IEC 62631-3-2 |
| Value | Units | Test Method / Conditions | |
| Flammability (3.0 mm) | V - 0 | class | UL 94 |
| Glow Wire (GWFI, 960°C, 1mm) | Passed | — | DIN EN 60695 |
| Value | Units | Test Method / Conditions | |
| Mould Temperature | 100 - 130 | °C | — |
| Melt Temperature | 300 - 320 | °C | — |
| Value | Units | Test Method / Conditions | |
| Shrinkage (Lengthwise, 24h) | 0.6 - 0.9 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 0.6 - 0.9 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
80 °C in a dry air (dessiccant) dryer for 2-12 h
Storage & Handling
- Storage Conditions
Store in dry, protected from light.