Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Flammability
- Processing Information (Injection Molding)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus (Dry) | 11700.0 | MPa | ISO 178 |
Flexural Strength (Dry) | 88.0 | MPa | ISO 178 |
Tensile Modulus (Dry) | 10400.0 | MPa | ISO 527 |
Tensile Strength at Break (Dry) | 53.0 | MPa | ISO 527 |
Tensile Elongation at Break (Dry) | 0.7 | % | ISO 527 |
Impact Strength (Dry, Charpy, at 23°C) | 6.0 | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Dry, Charpy, at 23°C) | 2.0 | kJ/m² | ISO 179/1eA |
Value | Units | Test Method / Conditions | |
Density (Dry) | 1510.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
HDT / A (Dry, 1.8 MPa) | 245.0 | °C | ISO 75-1/-2 |
DSC (Melt Point, Dry) | 262.0 | °C | ISO 11357 |
Coeffecient of Linear Thermal Expansion (parallel, dry) | 2.0 | E⁻⁶/K | ISO 11359-1/-2 |
Coeffecient of Linear Thermal Expansion (normal, dry) | 0.52 | E⁻⁶/K | ISO 11359-1/-2 |
Thermal Conductivity (integral) | 8.0 | W/(m K) | ISO 22007-2 |
Specific Heat Capacity | 1.5 | J/gK | — |
Thermal Conductivity (in-plane) | 2.5 | W/(m K) | ASTM E 1461 |
Thermal Conductivity (through-plane) | 1.3 | W/(m K) | ASTM E 1461 |
Value | Units | Test Method / Conditions | |
Moisture Content | max. 0.12 | % | — |
Value | Units | Test Method / Conditions | |
Surface Resistance (Conditioned) | max. 150 | Ohm | IEC 62631-3-2 |
Value | Units | Test Method / Conditions | |
Flammability (Dry, 3 mm) | V - 0 | class | UL 94 |
Glow Wire (GWFI, 960°C, 1mm) | Passed | — | DIN EN 60695 |
Value | Units | Test Method / Conditions | |
Mould Temperature | 100 - 130 | °C | — |
Melt Temperature | 300 - 320 | °C | — |
Value | Units | Test Method / Conditions | |
Shrinkage (Lengthwise, 24h) | 0.3 - 0.5 | % | ISO 294-4 |
Shrinkage (Lateral, 24h) | 0.3 - 0.5 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
80 °C in a dry air (dessiccant) dryer for 2-12 h
Storage & Handling
- Storage Conditions
Store in dry, protected from light.