Products

POLURENE M 75 is the hexamethylene diisocyanate biuret. Due to the fact that it is an aliphatic isocyanate resin, POLURENE M 75 should be suitable, when combined together with acrylic or saturated polyester resin, to obtain non yellowing coating very stable to the light with high weather resistance.

POLURENE OK. D. S is recommended for the formulation of matt and semigloss topcoats or sealers, clear and pigmented color retention and yellowing resistance are required. Due to its slightly yellowing property POLURENE OK. D. S is suitable for light pigmented paints. As well, the paint hardened with POLURENE OK. D. S has good flexibility and mechanical resistance. Due to its reactivity and its compatibility to nitrocellulose,

POLURENE T70 can be used in combination with tested hydroxylated components for the formulation of 2K non-yellowing topcoats with good resistance to chemical agents. POLURENE T70 can be diluted with esters and aromatic solvents up to 10-15%, without any precipitation process, whereas with aliphatic solvents like white spiritit is recommended not to dilute the product below 30% solid content.

POLURENE BK 1175 is a blocked isocyanate suitable for the formulation of non-yellowing IK stoving enamels; it can be used in traditional stoving enamels to flexibilize and to increase adhesion.

Saturated polyester resin with high wettability and flexibility. Suitable for high filled two-pack coatings and adhesives formulations.

POLURENE IR 51 AB is recommended for the formulation of PU sealers and matt topcoat.

HYDRORENE AW 4 01 is a low Monomer Content solvent-free product.

POLURENE AD is recommended for two pack polyurethane systems where good surface hardness, durability, brightness and solvent resistance are required. The final properties of coatings depend on the type and on the quantity of the OH terminated polymer that is used as the first component. Due to its aromatic content, POLURENE AD can be used for indoor and outdoor coatings, when a good yellowing resistance is not requested.

POLURENE MT 90 is recommended for the formulation of non yellowing high solid content and low viscosity coatings with for metal,wood and plastics. Being an aliphatic isocyanate, POLURENE MT 90 can be used in combination withacrylic or saturated polyester resins for the formulation of non yellowing coatings, showing UV light stability and excellent mechanical and chemical resistance.

REXIN DP 328 is recommended for the formulation of 2K polyurethane sealers and high gloss topcoats, clear and pigmented. REXIN DP 328 is a saturated polyester resin studied for P.U two components.REXIN DP 328 is a flexible resin and, used alone or in combination with REXIN HS 129 or other REXIN, it is possible to formulate sealers and matt finishes. These paints have excellent substrate wetting, good solvent release, fast curing and resistance to overcoating.

POLURENE MT 100 LV is recommended for the formulation of non-yellowing,high solid content and low viscosity coatings with for metal, wood and plastics. POLURENE MT 100 LV is used to prepare formulations with higher solids content, compared to standard HDI biurets and trimers. POLURENE MT 100 LV should not be thinned to below a solids content of 40%.

POLURENE OK. D. AE is recommended for the formulation of overprinting coatings for paper and polishable varnishes and enamels with good color retention for wood, metal, plastic.

POLURENE IR 51 EA is recommended for the formulation of hardener for 2K PU system.

POLURENE IR 51 BA is recommended for the formulation of hardener for 2K PU sealers and matt topcoat. POLURENE IR 51 BA is used to formulate fast curing hardener. POLURENE IR 51 BA can be used in combination with POLURENE AD, for the formulation of sealers and matt topcoat, clear or pigmented, when fast curing and high scratch resistance are required.

POLURENE PTSI reacts with water and with OH-groups generating an inert amide and carbon dioxide. Eliminates slight parts of humidity and prevents moisture-related problems in the formulation of polyurethane coatings.12g of POLURENE PTSI are needed to trap Ig of water. Moisture scavenger.

BLUEPUR 3038 is a aliphatic-aromatic isocyanurate.

BLUEPUR 2937 is an aliphatic coalescent free polyurethane dispersion formulated forparquet coatings. The special chemical structure of BLUEPUR 2937 helps the self-crosslinking of the resin and improves the performances even when used in one-component systems.

POLURENE M 75 is recommended for the formulation of topcoats non yellowing and outdoor resistant. POLURENE M 75 is the hexamethylene diisocyanate biuret.POLURENE M 75 is an aliphatic isocyanate resin suitable, when combined with acrylic or saturated polyester resin, to formulate non yellowing coating stable to the light with high weatherability resistance.

POLURENE LP100NPF is a yellow liquid. Compliance with EC and REACH.

UCOPOL M 4054 is an urethane prepolymer recommended for the maintenance of wood, for anti-skid floors, gymnasiums and for highly abrasion resistant coatings.

POLURENE M 75 is recommended for the formulation of topcoats non yellowing and outdoor resistant. POLURENE M 75 is the hexamethylene diisocyanate biuret. Due to the fact that it is an aliphatic isocyanate resin, POLURENE M 75 should be suitable when combined together with acrylic, or saturated poleyster resin, to obtain non yellowing coating very stable to the light with light weather resistance.

POLURGREEN MT100 LLV-is recommended for the formulation of topcoats non yellowing. Useful for coatings with maximum yellowing resistance and perfect leveling with low VOC content.

UCOPOL M 541 is used for the formulation of one component and two component sealants and industrial adhesives. UCOPOL M 541 is recommended for the formulation of both sealants and coatings for concrete substrates.It can be mixed with UCOPOL M 551 in order to provide tough flexible sprayable films.

POLURENE OK-HP is recommended for the formulation of matt and semigloss topcoats or sealers, clear and pigmented color retention and yellowing resistance are required.

POLURGREEN FP 75 01 is Low monomer version of POLURENE FP 75K. Polyurethane adduct version in accordance with EU, BFR and FDA regulations for food packaging.

BLUEPUR 3037 is an aliphatic coalescent free polyurethane dispersion.The special chemical structure of BLUEPUR 3037 helps the self-crosslinking of the resin and improves the performances even when used in one-component systems. It is suitable for the formulations of sealers and top coat with high flexibility and for all those substrates that undergo post-forming after painting.

POLURENE 60T is recommended for the formulation of pigmented and clear sealers, matt and gloss topcoats. POLURENE 60T is a very versatile polyisocyanate used for the formulation of polyurethane sealers and topcoats, also in combination with rigid resins.

POLURENE 6308 is recommended for the formulation of one component and two component barrier coatings for oily wood. It is very suitable for one component barrier coatings for wood with high vegetables fats content. Due to its aromatic content, POLURENE 6308 can be used for indoor and outdoor coatings, when a good yellowing resistance is not requested.

Clear and pigmented paints for ABS, PVC, PUR, Polystyrene and Paper. Good yellowing, abrasion and shock resistance.

REXIN 6302 K is recommended for the formulation of fast drying 2K polyurethane overprint varnish. Aromatic polyester to be used in the formulation of fast drying 2K matt/glossoverprint varnish in combination either with Polurene IR51 K or FP 75 K.

REXIN DP 127 is recommended mainly for high gloss 2K polyurethane coatings for indoor and outdoor application. REXIN DP 127 is a high quality resin that enable to prepare paint formulations whereexcellent hardness, high scratch resistance, gloss, abrasion and weather resistance are required.

UCOPOL OL 17/60 WD is recommended for the formulation of DIY matt and glossy wood varnishes for outdoor frames and marine and industrial environment resistant coatings. UCOPOL OL 17/60 WD cures with oxypolimerization and the main propierties are fastcuring, hardness abrasion resistance significantly higher than alkyd resins. UCOPOL OL 17/60 WD has good weather resistance and, due to its low acid value, it is very stable with anticorrosive pigments and metallic powders.

HYDRORENE 33 is recommended as a hardener for two component water-based polyurethane systems. In such systems, according to the resin, HYDRORENE 33 can be used for painting various substrates like wood, metal, plastic.

POLURENE MD 1500 is Polymeric MDI with excellent flexibility. Recommended for solvent free 2K PU coatings like self-levelings, synthetic mortars and adhesives, fast drying and more flexible than POLURENE MD 1600.

POLURGREEN PRP 4041 Olis a polyether based prepolymer with low elongation andhigh modulus. It's chemical nature imparts good hydrolysis resistance. POLURGREEN PRP 4041 Olis mainly used in formulation of IK and 2K polyurethane adhesives and sealants with very low monomer content, where yellowing resistance is needed.

POLURCAST XP1090 01 is a aromatic prepolymer.