Products

POLURENE M 75 is the hexamethylene diisocyanate biuret. Due to the fact that it is an aliphatic isocyanate resin, POLURENE M 75 should be suitable, when combined together with acrylic or saturated polyester resin, to obtain non yellowing coating very stable to the light with high weather resistance.

POLURENE BK 1175 is a blocked isocyanate suitable for the formulation of non-yellowing IK stoving enamels; it can be used in traditional stoving enamels to flexibilize and to increase adhesion.

POLURENE OK. D. S is recommended for the formulation of matt and semigloss topcoats or sealers, clear and pigmented color retention and yellowing resistance are required. Due to its slightly yellowing property POLURENE OK. D. S is suitable for light pigmented paints. As well, the paint hardened with POLURENE OK. D. S has good flexibility and mechanical resistance. Due to its reactivity and its compatibility to nitrocellulose,

POLURENE T70 can be used in combination with tested hydroxylated components for the formulation of 2K non-yellowing topcoats with good resistance to chemical agents. POLURENE T70 can be diluted with esters and aromatic solvents up to 10-15%, without any precipitation process, whereas with aliphatic solvents like white spiritit is recommended not to dilute the product below 30% solid content.

POLURENE IR 51 AB is recommended for the formulation of PU sealers and matt topcoat.

POLURGREEN PRP 450 Olis a polyether based prepolymer with high elongation andgood modulus. It's chemical nature imparts good hydrolysis resistance. POLURGREEN PRP 450 Olis mainly used in formulation of IK and 2K polyurethane adhesives and sealants with very low monomer content.

POLURENE MT 90 is recommended for the formulation of non yellowing high solid content and low viscosity coatings with for metal,wood and plastics. Being an aliphatic isocyanate, POLURENE MT 90 can be used in combination withacrylic or saturated polyester resins for the formulation of non yellowing coatings, showing UV light stability and excellent mechanical and chemical resistance.

HYDRORENE AW 4 01 is a low Monomer Content solvent-free product.

POLURENE OK. D. AE is recommended for the formulation of overprinting coatings for paper and polishable varnishes and enamels with good color retention for wood, metal, plastic.

POLURENE MT 100 LV is recommended for the formulation of non-yellowing,high solid content and low viscosity coatings with for metal, wood and plastics. POLURENE MT 100 LV is used to prepare formulations with higher solids content, compared to standard HDI biurets and trimers. POLURENE MT 100 LV should not be thinned to below a solids content of 40%.

POLURGREEN PRP 750 01 Olis a polyether based prepolymer with low elongation andhigh modulus. It's chemical nature imparts good hydrolysis resistance. POLURGREEN PRP 750 01 Olis mainly used in formulation of IK and 2K polyurethane adhesives and sealants with very low monomer content.

POLURENE IR 51 EA is recommended for the formulation of hardener for 2K PU system.

POLURGREEN MT100 LLV-is recommended for the formulation of topcoats non yellowing. Useful for coatings with maximum yellowing resistance and perfect leveling with low VOC content.

POLURENE M 75 is recommended for the formulation of topcoats non yellowing and outdoor resistant. POLURENE M 75 is the hexamethylene diisocyanate biuret.POLURENE M 75 is an aliphatic isocyanate resin suitable, when combined with acrylic or saturated polyester resin, to formulate non yellowing coating stable to the light with high weatherability resistance.

POLURENE M 75 is recommended for the formulation of topcoats non yellowing and outdoor resistant. POLURENE M 75 is the hexamethylene diisocyanate biuret. Due to the fact that it is an aliphatic isocyanate resin, POLURENE M 75 should be suitable when combined together with acrylic, or saturated poleyster resin, to obtain non yellowing coating very stable to the light with light weather resistance.

POLURENE IR 51 BA is recommended for the formulation of hardener for 2K PU sealers and matt topcoat. POLURENE IR 51 BA is used to formulate fast curing hardener. POLURENE IR 51 BA can be used in combination with POLURENE AD, for the formulation of sealers and matt topcoat, clear or pigmented, when fast curing and high scratch resistance are required.

POLURGREEN FP 75 01 is Low monomer version of POLURENE FP 75K. Polyurethane adduct version in accordance with EU, BFR and FDA regulations for food packaging.

POLURENE PTSI reacts with water and with OH-groups generating an inert amide and carbon dioxide. Eliminates slight parts of humidity and prevents moisture-related problems in the formulation of polyurethane coatings.12g of POLURENE PTSI are needed to trap Ig of water. Moisture scavenger.

POLURENE OK-HP is recommended for the formulation of matt and semigloss topcoats or sealers, clear and pigmented color retention and yellowing resistance are required.

POLURENE 60T is recommended for the formulation of pigmented and clear sealers, matt and gloss topcoats. POLURENE 60T is a very versatile polyisocyanate used for the formulation of polyurethane sealers and topcoats, also in combination with rigid resins.

POLURENE 6308 is recommended for the formulation of one component and two component barrier coatings for oily wood. It is very suitable for one component barrier coatings for wood with high vegetables fats content. Due to its aromatic content, POLURENE 6308 can be used for indoor and outdoor coatings, when a good yellowing resistance is not requested.

POLURENE M 75 BA is a aliphatic biuret with high flexibility, suitable for the formulation of no yellowing 2K PU coating and stoving enamel.

Properties of POLURENE MD 1600 are the excellent elasticity and the good reactivity. POLURENE MD 1600 is recommended for the formulation of two components polyurethane solvent-free coatings, like: self-levellings, sealants and two components adhesives or primers. The properties of hardness and elasticity of the coatings depend on type of polyol used.

POLURENE XP 4041 is a HDI Derivative product.

HYDRORENE AW 30 is clear liquid. Compliance with EU and REACH.

POLURENEADD PTSI have moisture scavenger use. POLURENE PTSI reacts with water and with OH-groups generating an inertamide and carbon dioxide. Eliminates slight parts of humidity and prevents moisture-related problems in the formulation of polyurethane coatings.

POLURENE MT100 LLV is recommended for the formulation of topcoats non yellowing. Useful for coatings with maximum yellowing resistance and perfect leveling with low VOC content.

Polyurethane adduct for general purposes. Suitable for 2K varnishes and enamels. POLURGREEN AD-01 is recommended for the formulation of two component varnishes and enamels for parquet, wood furniture, metal, plastic and paper, hardeners for shoe market adhesive and inks.

POLURGREEN HR-01 is recommended for the formulation of matt polyurethane

POLURGREEN PRP 5500 01 have adhesives and sealants applications. POLURGREEN PRP 5500 Olis a branched polyether based prepolymer with low elongation and high modulus. It's chemical nature imparts good hydrolysis resistance. POLURGREEN PRP 5500 Olis mainly used in the formulation of IK polyurethane adhesives and sealant with very low monomer content.

Polurene MT 90 AB is an HDI trymer. This product is designed for non-yellowing systems. It can be used in low-viscosity 2K paints and enamels for metal, wood and plastics that contain high solids. This product contains less than.2% HDI isocyanates.

POLURENE HR. B. S is recommended for the industrial coating of wood and furniture for the formulation of polyurethane sealers and matt furniture finishing. POLURENEHR. B. S is recommended for the formulation of matt and semi-glossy sealers and topcoat characterized by fast initial drying and easy sandability. Compared to standard isocyanurate based on TDI, POLURENE HR. B. S has longer pot life, it is more elastic and it can tolerate a bigger quantity of aromatic solvents.

POLURENE AC510 is a clear liquid. Compliance with EU and REACH.

Fast drying hardener for 2K PU system with limited yellowing. Suitable for the formulation of sealers and matt topcoats, it gives hardness to the final coating.

HYDRORENE 33 is recommended as a hardener for two component water-based polyurethane systems. In such systems, according to the resin, HYDRORENE 33 can be used for painting various substrates like wood, metal, plastic.

POLURGREEN MT 100 is a TDI Derivative product.