Products

VINNAPAS® CA 55 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a medium-firm hand is required. The dispersion combines high solid content with a low viscosity—a combination that permits the addition of high filler loadings, resulting in adhesive formulations with high solid contents that are typically required in the carpet industry. VINNAPAS® CA 55 is not produced with any added organic solvents, plasticizers, or formaldehyde donors.

ELASTOSIL® N9111 White is a non-slump, non-corossive, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. It is a multipurpose sealant and adhesive for the appliance, automotive, and electronics industries. Due to its shear-thinning nature, ELASTOSIL® N9111 White is easy to apply. The material starts curing upon contact with air humidity.

SILPURAN® 6000/05 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/05 A/B is designed for medical applications in compliance with Wacker Silicones' health care policy. Please note that this material has use restrictions according to Wacker Silicone's health care policy. In particular, contact with body tissue or blood is not permitted.

ELASTOSIL® LR 3842/60 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

WACKER® Adhesion Promoter AMS 61 is a mixture of aminofunctional siloxanes. It is a colorless to yellow liquid that can be clear or slightly turbid. It is not miscible with water and decomposes with water and moisture, resulting in the formation of methanol. This adhesion promoter serves as a raw material for the production of RTV-1-silicone rubbers.

ELASTOSIL® R Plus 4305/60 S is a two-component, high-consistency silicone rubber specifically designed for manufacturing extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and good to very good mechanical properties. This fast-curing silicone rubber demonstrates good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-cured materials, thanks to the addition cure process. Moreover, no peroxide decomposition products are formed during vulcanization.

VINNAPAS® EP 3455 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of alkyl phenol ethoxylate (APEO)-containing compounds. The dispersion offers very high scrub resistance, excellent hiding power, and exceptional pigment binding ability.

ELASTOSIL® SOLAR 3210 A/B is a pourable addition-curing RTV-2 silicone rubber specifically designed for coating, lamination, encapsulation, and molding applications. This product undergoes vulcanization at both room temperature and under heat, resulting in a transparent silicone rubber with excellent transmission properties and a moderate hardness. Cured ELASTOSIL® SOLAR 3210 A/B exhibits exceptional long-term stability against weathering, moisture, and UV light. It can withstand constantly changing climatic conditions, UV radiation, and temperatures up to 180 °C (356 °F) without any damage to the silicone elastomer.

SILFOAM® SE 1661 is a water-dilutable antifoam emulsion with a medium viscosity and excellent storage stability, thanks to its nonionic emulsifier system. This product serves the dual purpose of preventing foam formation (as an antifoam) and eliminating existing foam (as a defoamer) in a wide range of aqueous systems. SILFOAM® SE 1661 is particularly well-suited for applications where the use of silicones could typically present challenges, such as PVC degassing, the manufacturing and processing of polymer dispersions for textiles, paper, paints, surface coatings, and adhesives, as well as cooling lubricants and textile formulations.

GENIOSIL® GF 96 is an alkoxysilane with an amino-functional group. It is a clear, colorless liquid with a characteristic amine odor. This product finds applications in various industries, particularly in building and construction adhesives, DIY projects, flooring installation, interior paints and coatings, and waterproofing membranes. GENIOSIL® GF 96 offers excellent adhesive properties and is well-suited for use in the construction and home improvement sectors.

WACKER® AK 600000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 600000 mm²/s. Its unique chemical structure gives WACKER® AK 600000 exceptional properties that distinguish it from organic materials like mineral oils. This clear, odorless, and colorless liquid exhibits an outstanding property profile.

ELASTOSIL® SUB C 2002 A/B is a two-component, low-viscosity, addition-curing silicone rubber specifically developed for deep-sea applications. It is designed to maintain flexibility in extreme temperature conditions, ranging from -40 °C to +180 °C. This silicone rubber is particularly well-suited for manufacturing various types of thermal insulation devices. Its low viscosity allows for easy flow and application.

WACKER® AS 100 Silicone fluid is a clear, colorless, and odorless polydimethylsiloxane with a low proportion of phenyl groups. It serves as a versatile damping fluid, providing excellent vibration and noise reduction in various applications. Additionally, it is commonly used as a heat transfer fluid and serves as a base fluid for low temperature lubricants.

SILPURAN® 6000/30 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/30 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® N294 is a free-flowing, ready-to-use silicone rubber that vulcanizes either at room temperature or at high temperatures under the influence of atmospheric moisture. ELASTOSIL® N294 is available in blue and red colors. It is particularly suited for screen printing.

SILFOAM® SC 1132 is an opaque and viscous anhydrous compound known for its effectiveness against a wide range of surfactants. It is particularly useful as a defoamer in structured liquid detergents and serves as a reliable deaerating and defoaming agent in gel products. Additionally, SILFOAM® SC 1132 can be utilized in the manufacturing of antifoam powders, which are used as foam suppressors when added to powder detergents.

SILRES® BS 3003 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Diluted solutions of SILRES® BS 3003 serve as high-quality general-purpose water repellents for impregnating and priming mineral surfaces. It can also be used for the mass treatment of non-load-bearing concrete products and as a post-hydrophobation agent for fiber cement products like fiber cement boards.

GENIOSIL® GF 56 is an alkoxyvinylsilane. It is a clear, colorless liquid with a distinctive aromatic odor. In the presence of moisture, it undergoes hydrolysis (releasing ethanol) to form silanols, which can further react with each other to generate siloxanes. Acting as a bifunctional molecule, GENIOSIL® GF 56 serves as a molecular bridge between organic and inorganic substrates.

SILPURAN® AUX 8250 RO is a white, barium sulfate-containing batch that is used as a radio-opaque additive for peroxide-cured high-contrast silicone rubber. SILPURAN® AUX 8250 RO is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

PULPSIL® 255 C is a highly viscous, solvent-free, and water-free silicone antifoam compound specifically designed for use in pulp mills. It offers excellent efficiency in controlling foam. To achieve high efficiency, it is important to ensure proper dispersion of PULPSIL® 255 C in the foaming medium. This can be achieved by adding the product in its neat form, particularly when high amounts of surfactants and/or high shear forces are present to facilitate good dispersion.

VINNAPAS® EP 3360 (BGH) is an aqueous polymer dispersion that is based on vinyl acetate and ethylene. It is produced without the use of alkyl phenol ethoxylate (APEO)-containing compounds. This dispersion offers a high solid content, allowing for formulation flexibility and improved supply-chain efficiency. It also provides very high scrub resistance, excellent hiding power, and enables the creation of low-odor products.

VINNAPAS® EP 3362 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of alkyl phenol ethoxylate (APEO)-containing compounds. The dispersion offers a high solid content, providing formulation flexibility and improving supply-chain efficiency. It exhibits very high scrub resistance and excellent hiding power. Additionally, it features improved high-temperature resistance.

PULPSIL® 745 E is a low-viscosity, highly effective silicone antifoam emulsion specifically designed for use in pulp mills. It is characterized by its low viscosity, making it easy to dose, as well as its excellent long-term efficiency and very good knock-down efficiency. PULPSIL® 745 E functions primarily as an antifoam agent and drainage aid, and it can be added at different stages of the manufacturing process.

VINNAPAS® 5046 T is a dispersible polymer powder for dry mix mortars, specifically suited for thixotropic tile adhesives, repair mortars, troweling compounds, and ETICS. It is based on a flexible copolymer of vinyl acetate and ethylene. VINNAPAS® 5046 T belongs to the product class VINNAPAS® T, which means that it provides thixotropic properties. In addition to strong non-slump properties, it offers excellent workability.

PULPSIL® 270 C is a highly viscous, relatively alkaline-resistant, extremely efficient, solvent- and water-free silicone antifoam compound, specially developed for use in pulp mills. It is particularly effective when formulated as an emulsion, making it an excellent antifoam agent for various pulp processing steps, including washing, screening, bleaching, and wastewater treatment. The product exhibits thixotropic properties, requiring gentle stirring to reduce viscosity.

PULPSIL® 238 C is a highly viscous silicone antifoam compound, specifically formulated for use in pulp mills. It is resistant to alkaline conditions and does not contain solvents or water. It is known for its excellent handling, good long-term efficiency, and very good knock-down efficiency.

PULPSIL® 814 E is a medium-viscosity, low-concentrated, highly effective silicone antifoam emulsion, specifically developed for use in pulp mills. It acts primarily as an antifoam agent and drainage aid and can be added at various stages during the manufacturing process. PULPSIL® 814 E is characterized by its excellent long-term efficiency and knock-down efficiency, particularly in aggressive black liquors. It offers high performance even at low dosages.

VINNAPAS® 5012 T is a thixotropic dispersible polymer powder for dry mix technology, specifically suited for tile adhesives, renders and plasters, wall and joint fillers, as well as skim coats. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® T, which means it has a thixotropic effect on rheology and provides the basic properties of adhesion and flexibility in addition. VINNAPAS® 5012 T is part of our standard range, offering the best-in-class solution for a wide variety of applications.

PULPSIL® 763 E is a low-viscosity, highly effective silicone antifoam emulsion specifically designed for use in pulp mills. It is mainly used in pulp washing and screening processes, but it is also effective during bleaching and wastewater treatment. PULPSIL® 763 E acts primarily as an antifoam agent and drainage aid, and it can be added at various stages of the manufacturing process.

VINNAPAS® EAF 7868 is a low glass transition temperature (Tg) aqueous polymer dispersion formulated with vinyl acetate, ethylene, and acrylic esters. It is manufactured without the use of plasticizers and demonstrates excellent compatibility with fillers. Moreover, it provides good adhesion to diverse substrates, including concrete, metal, wood, and plastics. Derived from low-volatile C1/C2 value streams, it can be formulated without the need for plasticizers.

PULPSIL® 959 S is an aqueous solution of a hydrolytically stable polyether-modified silicone fluid. It offers several key characteristics, including improved cleaning properties compared to conventional mechanical cleaning methods, increased processing speed, low surface tension, good wetting properties, easy processing, and excellent solubility in water.

PULPSIL® 733 E is a low-viscosity, highly effective silicone antifoam emulsion specifically designed for use in pulp mills. It serves as both an antifoam agent and a drainage aid, and can be added at different stages of the manufacturing process. PULPSIL® 733 E is primarily used in pulp washing and screening processes, but it is also effective in bleaching and wastewater treatment.

VINNAPAS® EF 7877 is an aqueous polymer dispersion based on vinyl acetate and ethylene monomers. It is manufactured without the use of plasticizers and exhibits excellent filler compatibility. This product has high filler acceptance and provides good adhesion to various substrates, including concrete, metal, wood, and plastics.

PULPSIL® 160 C is a highly viscous silicone antifoam compound, specifically designed for use in pulp mills. It is resistant to alkaline conditions and does not contain solvents or water. PULPSIL® 160 C offers excellent handling, long-term efficiency, and knock-down efficiency.

PULPSIL® 850 E is a highly concentrated, medium-viscous, and highly effective silicone antifoam emulsion, specifically designed for use in pulp mills. It is known for its excellent long-term efficiency and very good knock-down efficiency. The product boasts a high concentration of active material, ensuring superior performance. Additionally, PULPSIL® 850 E is universally applicable to different types of black liquor.

VINNAPAS® 5047 T is a very flexible dispersible polymer powder with a slight thixotropic effect and very good workability, specifically suited for tile adhesives, troweling compounds, and ETICS. It is based on a copolymer of vinyl acetate and ethylene. VINNAPAS® 5047 T belongs to the product class VINNAPAS® T, which means that it provides thixotropic properties. In addition to its non-slump properties, it offers excellent workability.