Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Specific Features
- Additive
- BfR compliant
- FDA compliant
- Low volatile
Applications & Uses
- Application Details
- ELASTOSIL® COLOR PASTE FL TRAFFIC GREY A RAL 7042 TRANSLUCENT has been developed particularly for coloring addition-curing ELASTOSIL® LR liquid silicone rubber and ELASTOSIL® RT RTV-2 silicone rubber.
- ELASTOSIL® COLOR PASTE FL TRAFFIC GREY A RAL 7042 TRANSLUCENT may be used for coloring silicone parts intended for sensitive applications and complying with the “Recommendation XV. Silicones" and “IX.
- Pigments for coloring plastics" of the BfR and FDA Regulation CFR 21 § 177.2600 "Rubber Articles Intended for Repeated Use" under observance of any given limitations on extractable and volatile substances.
Processing
Before using an ELASTOSIL® COLOR PASTE FL, the color paste must be thoroughly stirred. This is also necessary if there has been a long interruption in production or from time to time in case of very long productions runs. Depending on the color intensity desired, 0.5 to 4.0 % pigment paste should be added. The concentration should be kept at a minimum. In individual cases, an excess of color paste may slow down the curing characteristics. Customers may produce other colors by mixing pigment pastes. Suggestions for formulations can be provided on request.
Properties
- Color
- Physical Form
- Typical Properties
- Properties
- ELASTOSIL® COLOR PASTE FL TRAFFIC GRAY A RAL 7042 TRANSLUCENT has been developed particularly for coloring addition-curing ELASTOSIL® LR liquid silicone rubber and ELASTOSIL® RT RTV-2 silicone rubber.
- ELASTOSIL® COLOR PASTE FL TRAFFIC GRAY A RAL 7042 TRANSLUCENT may be used for coloring silicone parts intended for sensitive applications and complying with the “Recommendation XV. Silicones" and “IX.
- Pigments for coloring plastics" of the BfR and FDA Regulation CFR 21 § 177.2600 "Rubber Articles Intended for Repeated Use" under observance of any given limitations on extractable and volatile substances.
Processing
Before using an ELASTOSIL® COLOR PASTE FL, the color paste must be thoroughly stirred. This is also necessary if there has been a long interruption in production or from time to time in case of very long productions runs. Depending on the color intensity desired, 0.5 to 4.0 % pigment paste should be added. The concentration should be kept at a minimum. In individual cases, an excess of color paste may slow down the curing characteristics. Customers may produce other colors by mixing pigment pastes. Suggestions for formulations can be provided on request.
- Note
- Density Cure Conditions: 15 min / 100°C evacuated, without press
- Color Cure Conditions: 2% in LR 3003/50, 5 min / 165°C in press
- Color Measurement Conditions: CIE 1976 D65, 10°, d/8
| Value | Units | Test Method / Conditions | |
| Coloristical Properties (a* Value) | -3 | — | DIN 5033 |
| Coloristical Properties (b* Value) | -3 | — | DIN 5033 |
| Coloristical Properties (L* Value) | 64 | — | DIN 5033 |
| Density | 1 | g/cm³ | DIN EN ISO 1183-1 A |
| Dynamic Viscosity (Shear rate 1 s⁻¹) | 20000 | mPa·s | DIN EN ISO 3219 |
| Dynamic Viscosity (Shear rate 10 s⁻¹) | 20000 | mPa·s | DIN EN ISO 3219 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Information
This product is available in 20 kg pail and 1kg tin.