Products

SILFOAM® SD 860 is an anhydrous silicone antifoam agent formulated with organofunctional silicone fluid and organic components. It exhibits excellent dispersibility in water. This antifoam agent is particularly suitable for use in organic systems that require a high level of compatibility with the antifoam agent. SILFOAM® SD 860 can effectively address challenges commonly encountered by silicones in various applications, including paints, adhesives, and water-miscible cooling lubricants.

SILFOAM® SC 369 is a medium viscosity antifoam agent with a 100% active ingredient content. It is formulated with an organically modified silicone fluid. Compared to antifoam agents based on pure silicone fluids (PDMS), SILFOAM® SC 369 demonstrates enhanced compatibility with organic systems in general.

LIOSIL® TS 80 E is a specially developed macroemulsion of a functional silicone fluid designed as a softener for the tissue industry. It provides an excellent soft touch along with very good hydrophilicity. This product can be easily diluted with water and exhibits high substantivity on cellulose fibers.

SILFOAM® SH is an anhydrous antifoam compound used in various industrial applications. It was specifically developed for different technical applications, including the biotechnological industry. SILFOAM® SH serves as an effective degassing aid to reduce foam formation during the production and processing of paints. Additionally, it is a reliable degassing aid for PVC pastes and casting resins.

SILRES® BS 1042 is an aqueous emulsion of a reactive polydimethylsiloxane. Its purpose is to provide water repellency to materials such as glass wool mats or rock wool mats that are bound with phenolic resin. It can also be used for low-density bulk goods like perlite or vermiculite. The emulsion helps to impart water-repellent properties to these materials, enhancing their performance in moisture-related applications.

SEMICOSIL® 2M2M is a high-purity dimethoxydimethylsilane with low levels of metal, chloride, and methanol content. It was developed specifically for the semiconductor industry, serving as a precursor for low-dielectric-constant interlayer dielectrics. This product is commonly used in chemical vapor deposition (CVD) and spin-on dielectric (SOD) applications.

SILRES® BS 1310 is a solvent-free, water-thinnable emulsion of polysiloxane modified with functional silicone resin. It is an additive used in the production of aqueous masonry coatings and aqueous primers to enhance water repellency and resistance. Additionally, it improves the processability and antiblocking characteristics of the aqueous coatings.

SILRES® BS 1360 is a nonionic, solvent-free, water-dilutable emulsion of a reactive polysiloxane. It can be added in undiluted form to aqueous masonry protection agents either during or after their production. Similar to SILRES® BS 1346, SILRES® BS 1360 is used undiluted as a hydrophobizing additive for aqueous masonry paints. Its primary functions are to enhance water repellency, water resistance, water vapor permeability, processability, and anti-blocking properties.

HDK® H13L is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H13L is primarily used as a thickening, thixotropic, and anti-sedimentation agent in various applications such as coatings, printing inks, adhesives, and others. It finds its main application in polar systems. The strong hydrophobicity of HDK® H13L makes it particularly suitable for solvent-free systems, high solids formulations, and waterborne coatings.

SEMICOSIL® HMDSO-EL is a high-purity hexamethyldisiloxane (HMDSO) known for its exceptional purity, low metal content, and low chloride content. This product has been specifically developed to cater to the needs of the semiconductor industry. It finds applications in various processes such as chemical vapor deposition (CVD) and spin-on dielectrics (SOD).

SEMICOSIL® 4MS-EL is a high-purity silane compound specifically developed for the semiconductor industry. It is used as a precursor for low-dielectric-constant interlayer dielectrics in applications such as chemical vapor deposition (CVD) and spin-on dielectrics (SOD). This product is known for its high purity, low metal content, and low chloride content, ensuring optimal performance in semiconductor processes.

HDK® N20P is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® N20P is commonly applied in the electronics industry as a white colloidal powder of high purity.

SILFOAM® SE 1060 is a versatile antifoam emulsion with a high concentration of emulsifier. It offers excellent resistance to alkalis and acids, making it suitable for various applications where pH is a critical factor. Its wide range of uses makes it a highly adaptable solution.

HDK® T40 is a standard synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity commonly used in various industrial applications. HDK® T40 finds applications in flexographic printing, gravure printing, industrial wood coatings, inkjet paper, offset printing, and printing inks.

LIOSIL® TS 40 E is a microemulsion of a functional silicone fluid specifically developed as a softener for the tissue industry. It offers excellent softness and a very good hydrophilic nature. The product is easily diluted with water and exhibits high substantivity on cellulose fibers. It is a microemulsion.

PULPSIL® 955 S is a hydrolytically stable silicone surfactant that is water-dispersible and consists of a polyethermodified silicone fluid. It has been specifically designed for use in the pulp and paper industry. This product significantly improves the efficiency of paper deaerators, enhances the drainage and deaeration processes in pulp production, and acts as a booster for pulp defoamers beyond their cloud point.

HDK® V15 is a standard synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity commonly used in various industrial applications. HDK® V15 finds its application as a thickening and thixotropic agent in silicone sealants. Additionally, it is used as a reinforcing filler in elastomers, particularly silicone elastomers.

HDK® S13 is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® S13 is a white colloidal powder of high purity. It finds application in inkjet paper and pulp, paper & printing processes.

SEMICOSIL® 6C2S is a hyperpure hexachlorodisilane with ultra-high purity and low metal content. This product falls under the category of silanes used for chemical vapor deposition (CVD) and spin-on dielectrics (SOD). It was specifically developed for the semiconductor industry, serving as a precursor for low-temperature deposition processes and other applications within the field.

SILRES® BS 1306 is a solventless, water-thinnable emulsion of polysiloxane modified with functional silicone resin. It can also be used as a water-repellent primer, in which case it should be diluted with water at a ratio of 1 part SILRES® BS 1306 to 9 parts water. If the primer is required to strengthen the substrate, we recommend adding a polymer dispersion in hydrosol form.

HDK® H17 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H17 is used as a thickening and thixotropic agent in composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

GENIOSIL® GF 82 is an epoxy-functional alkoxysilane. It is a clear, colorless liquid with a characteristic odor similar to gasoline. It hydrolyzes slowly in the presence of water, releasing ethanol, and forms silanols that can react with themselves to produce siloxanes or bind to inorganic substrates. The epoxy group on GENIOSIL® GF 82 can undergo a ring-opening reaction with nucleophiles such as alcohols and amines.

SILFOAM® SE 1661 is a water-dilutable antifoam emulsion with a medium viscosity and excellent storage stability, thanks to its nonionic emulsifier system. This product serves the dual purpose of preventing foam formation (as an antifoam) and eliminating existing foam (as a defoamer) in a wide range of aqueous systems. SILFOAM® SE 1661 is particularly well-suited for applications where the use of silicones could typically present challenges, such as PVC degassing, the manufacturing and processing of polymer dispersions for textiles, paper, paints, surface coatings, and adhesives, as well as cooling lubricants and textile formulations.

SEMICOSIL® HMN-EL is a high-purity hexamethyldisilazane specifically developed for use in photoresists for semiconductor manufacturing. It serves as an adhesion promoter and silylating agent in processes like chemical amplification. This product is characterized by its high purity, low metal content, low chloride content, and low residue on evaporation, ensuring optimal performance in semiconductor applications.

PULPSIL® 850 E is a highly concentrated, medium-viscous, and highly effective silicone antifoam emulsion, specifically designed for use in pulp mills. It is known for its excellent long-term efficiency and very good knock-down efficiency. The product boasts a high concentration of active material, ensuring superior performance. Additionally, PULPSIL® 850 E is universally applicable to different types of black liquor.

PULPSIL® 960 S is a hydrolytically stable silicone surfactant based on a polyether-modified silicone fluid, designed specifically for use in the pulp and paper industry. This product is water-dispersible, allowing for easy incorporation into water-based systems. To achieve optimal dispersion, we suggest starting with water and gradually adding PULPSIL® 960 S while stirring continuously.

PULPSIL® 823 E is a medium-viscous, highly effective silicone antifoam emulsion, specifically designed for use in pulp mills. It acts primarily as an antifoam agent and drainage aid and can be added at various stages during the manufacturing process. PULPSIL® 823 E is mainly used in pulp washing and screening processes, as well as bleaching and wastewater treatment. It offers very good knock-down efficiency and long-term efficiency.

PULPSIL® 160 C is a highly viscous silicone antifoam compound, specifically designed for use in pulp mills. It is resistant to alkaline conditions and does not contain solvents or water. PULPSIL® 160 C offers excellent handling, long-term efficiency, and knock-down efficiency.

PULPSIL® 814 E is a medium-viscosity, low-concentrated, highly effective silicone antifoam emulsion, specifically developed for use in pulp mills. It acts primarily as an antifoam agent and drainage aid and can be added at various stages during the manufacturing process. PULPSIL® 814 E is characterized by its excellent long-term efficiency and knock-down efficiency, particularly in aggressive black liquors. It offers high performance even at low dosages.

PULPSIL® 844 E is a highly concentrated, medium-viscous, and highly effective silicone antifoam emulsion, specially developed for use in pulp mills. It is known for its excellent long-term efficiency, very good knock-down efficiency, and impressive drainage performance. PULPSIL® 844 E is primarily used in pulp-washing and screening processes, and it is also effective during bleaching and wastewater treatment.

LIOSIL® TS 44 E US is a nonionic oil-in-water emulsion of highly viscous polydimethylsiloxane. It is specifically designed for formulating tissue softeners. The active ingredient enhances the lubricity and softness of tissue. LIOSIL® TS 44 E US can be easily diluted with water to create a ready-to-use emulsion. However, determining the optimal conditions will require conducting individual tests. It is recommended to stir well before use.

GENIOSIL® WP 1 is a polyether-based silane-terminated polymer suitable as a binder in moisture-curing formulations. It differs from conventional silylated polymers due to its high reactivity, which results from the structural proximity of the nitrogen atom to the silicon atom in the dimethoxy(methyl)silyl-methylcarbamate group (alpha-effect). It hydrolyzes in the presence of moisture to form a stable siloxane network initiated by mild catalysis, rather than heavy metal ions.

LIOSIL® TS 533 E US is a specially developed solution of a functional silicone fluid designed for the tissue industry. It offers a good soft touch and excellent hydrophilicity. This product is easily diluted with water due to its low viscosity. It also exhibits high substantivity on cellulose fibers, allowing for effective absorption. Additionally, it is permeable to water vapor, ensuring optimal breathability.

SILFOAM® SE 55A is a silicone defoamer emulsion with a medium viscosity, containing 40% active ingredients. It is specifically formulated to control foam in aqueous systems. SILFOAM® SE 55A utilizes Wacker's advanced silicone defoamer technology, making it suitable for use in alkaline and high-temperature applications. This product exhibits excellent foam knockdown properties and provides significant antifoam effectiveness over time.

LIOSIL® TS 50 E is a specially developed microemulsion of a functional silicone fluid, designed as a softener specifically for the tissue industry. This product contains aloe vera, vitamin E, and a WACKER SILFOAM® antifoam agent. With its unique structure and orientation on cellulose fibers, LIOSIL® TS 50 E provides excellent softness and high hydrophilicity, resulting in a pleasant and gentle touch.

SILFOAM® SE 4260 is a silicone antifoam emulsion specifically designed for use in cold climates. It exhibits exceptional frost stability and can be applied at temperatures below 0°C. This versatile product finds application in various industries, with a particular focus on the oil and gas sector for drilling fluids. SILFOAM® SE 4260 serves as an internal antifoam agent in drilling fluids to effectively control foam. Additionally, it can be used as a defoamer for on-demand additions.