Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fluids & Lubricants Functions
- Industrial Additives Functions
Features & Benefits
- Industrial Additives Features
- Specific Features
- Additive
- Defoaming
- Emulsions
- FDA registered
- Food-contact
- Liquid
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Fluids & Lubricants Type
- Industrial Additives End Use
- Use Level
- 0.02 - 0.5 %
- Application Details
Application
SILFOAM® SE 1661 prevents foaming (act as an antifoam) and destroys existing foam (acts as defoamer) in a large number of aqueous systems. It is ideal for systems in which silicones would usually cause problems:
- PVC degassing
- Manufacture and processing of polymer dispersions for textiles, paper, paints and surface coatings, as well as adhesives
- Cooling lubricants
- Textile formulations
Due to its raw material composition, SILFOAM® SE 1661 is suitable for direct food contact and as a processing aid in fermentation processes.
SILFOAM® SE 1661 shows a very good foam control performance in plant protection formulations (e.g. in surfactant rich agrochemical formulations).
Processing
In general we recommend stirring the emulsion before use (approx. 3 minutes with a propeller stirrer at 200 – 400 rpm). But be cautious: too high shear can break the emulsion. SILFOAM® SE 1661 is best added as it is. Metering pumps should have low shear stress. The amounts added usually are in the range from 0.02 to 0.5 %. However, the optimum dosage should be determined in preliminary tests.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Density (at 20°C) | approx. 1 | g/cm³ | DIN 51757 |
Dynamic Viscosity (at 25°C) | approx. (3000 - 13000) | mPa·s | Brookfield |
Emulsifier Type | o/w, Non-ionic | — | — |
pH (at 20°C) | approx. (3 - 6) | — | Indicator strips |
Solids Content | approx. 16 | % | — |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability