Products

LUMISIL® LR 7601/50 A/B is a liquid silicone rubber from the LUMISIL® LR 7601 series. It is a two-component compound with medium viscosity and fast curing times. The resulting vulcanizates exhibit exceptional optical transparency, along with excellent mechanical and electrical properties.

WACKER® AK 300 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 300000 mm²/s. It is formulated with a special heat stabilizer that provides protection against thermal decomposition and viscosity changes. This unique feature makes WACKER® AK 300 000 STAB highly suitable for applications subjected to high temperatures and/or shear stress. The heat stabilizer ensures the stability and integrity of the silicone fluid, allowing it to maintain its desired properties under challenging conditions.

DEHESIVE® 920 is a solvent-free, addition-curing silicone fluid that forms an integral part of a multicomponent system. When combined with a crosslinker, platinum catalyst, and potentially a CRA® release modifier, it is employed to apply a release coating onto paper and filmic substrates.

WACKER® AK 300000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 300000 mm²/s. Its unique chemical structure imparts exceptional properties to WACKER® AK 300000, distinguishing it from organic materials like mineral oils. It exhibits excellent water-repellent properties and possesses good dielectric properties.

ELASTOSIL® SC 835 A/B is a two-component silicone rubber that is flowable and addition-curing. It is specifically designed to form a closed cell foam structure. This material is highly compatible with automatic dispensing equipment, making it easy to process. ELASTOSIL® SC 835 A/B is ideal for the production of heat-resistant foam gaskets in a flat design, particularly for use in CIPG (Cured-in-Place Gasket) applications.

ELASTOSIL® LR 3846/30 A/B is a considerable oil-bleeding, liquid silicone rubber of the ELASTOSIL® LR 3846 series. It is a paste-like, readily pigmentable, two-component product with a short curing time. Shortly after the curing process, a slight, thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque, have good mechanical and electrical properties, and have very low compression sets.

ELASTOSIL® 7000 N is a one-component, neutral-curing, low-modulus silicone sealant with outstanding adhesion and a long shelf life for construction, glazing, and window applications, as well as industrial applications. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

ELASTOSIL® N291 is a free-flowing, ready-to-use silicone rubber that can be vulcanized at room temperature or at high temperatures when exposed to atmospheric moisture. It is specifically designed for printing sealing patterns on various substrates, such as steel or cylinder head gaskets containing or free of sulfur. This can be achieved using silk-screen printing techniques.

BELSIL® DM 100 is a linear, non-reactive, unmodified polydimethylsiloxane. It exhibits characteristics of low surface tension and a high spreading coefficient. Dimethicones, including BELSIL® DM 100, possess a flexible polymer backbone that enables them to have high permeability to gasses such as water vapor and oxygen. This property allows the skin to breathe and maintain natural respiration.

ELASTOSIL® R Plus 4305/80 US HCR silicone rubbers are addition-curing, two-part compounds (batch grades). The vulcanizates of these silicone rubbers exhibit excellent transparency and good to very good mechanical properties. ELASTOSIL® R Plus 4305/80 US is specifically designed for the fabrication of extruded articles that require high transparency and very good tear resistance values.

ELASTOSIL® R 427/70 is a high-strength silicone rubber known for its outstanding transparency, excellent tear strength, and exceptional mechanical properties. It is particularly suitable for the production of extruded profiles. The vulcanizing characteristics of this product allow for short cycle times in the manufacturing of molded articles through compression, transfer, and injection molding processes. Post-cured vulcanizates of this product can be utilized in various applications within the healthcare and food handling industries.

DEHESIVE® EM 490 is a vinyl polymer emulsion that contains polymer and is employed in conjunction with catalysts and silicone emulsion crosslinkers to impart release properties to various substrates. The primary application of this product is in the production of hygiene papers.

ELASTOSIL® N9111 White is a non-slump, non-corossive, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. It is a multipurpose sealant and adhesive for the appliance, automotive, and electronics industries. Due to its shear-thinning nature, ELASTOSIL® N9111 White is easy to apply. The material starts curing upon contact with air humidity.

SILFOAM® SRE is a versatile antifoam that contains 20% active ingredients and 33% solids. It is relatively rich in emulsifier but has a low viscosity, making it easy to measure accurately. SILFOAM® SRE also demonstrates high resistance to alkalis and acids, allowing for its application in a wide range of pH-sensitive scenarios.

ELASTOSIL® RT 778 is a non-slump, condensation-curing RTV-2 silicone adhesive. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 778 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures up to 250°C (482°F) without damage.

Wacker Chemie Methyl Acetate (MetAc) 97% is a clear, colorless liquid with a mild, ester-like odor. It is produced continuously, with a capacity of several thousand metric tons per year. It has undergone full registration under REACH. This product serves as a solvent in detergent, adhesive, paint, and coating applications.

POWERSIL® N 553 DarkGrey is a one-component silicone dispersion that cures to form a tough, high-voltage insulator coating with excellent electrical properties. It offers very good resistance to weathering and outstanding tracking resistance. Additionally, POWERSIL® N 553 DarkGrey creates a long-term hydrophobic surface, preventing the formation of wet conductive films and reducing the risk of pollution flashovers.

ELASTOSIL® K760 C is a one-component, neutral-curing, low-modulus silicone sealant with outstanding adhesion, a long shelf life, excellent tooling characteristics, and very good fire retardant properties for construction, glass, and window building, as well as industrial applications. ELASTOSIL® K760 C cures at room temperature in the presence of atmospheric moisture to give a permanently flexible silicone rubber.

ELASTOSIL® N288 is a low-viscosity, ready-to-use, neutral crosslinking silicone rubber. It cures at room temperature under the influence of atmospheric moisture. It exhibits excellent heat stability, excellent primerless adhesion to many substrates, permanent temperature exposure up to 200 °C, and peak temperatures up to 250°C.

WACKER® AK 100 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 100,000 mm²/s. It is formulated with a special heat stabilizer that safeguards the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 100 000 STAB is particularly well-suited for applications involving high temperatures and/or shear stress. It is a non-polar liquid with a low solidification point and exhibits good dielectric properties.

ELASTOSIL® N10 Transparent is a solvent-free, neutral-cure, low-viscous, and non-thixotropic silicone sealant that cures at room temperature under the influence of atmospheric moisture. It exhibits excellent primerless adhesion to many substrates. It is a multipurpose grade for bonding, sealing, and potting, e.g. in electronic applications.

ELASTOSIL N199 TRANSPARENT is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. ELASTOSIL® N199 Transparent exhibits excellent primerless adhesion to many substrates with high tear strength. It is a multipurpose adhesive and sealant for the electronics industry, with typical uses for CIPG- and FIPG-applications.

ELASTOSIL® R Plus 4370/50 is a two-component high consistency silicone rubber designed for the manufacturing of extruded articles. It utilizes addition curing and possesses self-bonding properties. This product is well suited for the production of two-component combinations using pressure-free extrusion or co-extrusion techniques.

HDK® H21 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H21 is used as a thickening and thixotropic agent in various applications such as composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

ELASTOSIL® Color Paste FL Yellow RAL 1016 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® SOLAR 2205 is a pourable addition-curing RTV-2 silicone rubber suitable for coating, lamination, and encapsulation purposes. The product cures at room temperature and under heat to yield a soft elastomer. Cured ELASTOSIL® SOLAR 2205 offers excellent long-term stability against weathering, moisture, and UV light. The soft silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures up to 160°C (320°F) without damage.

WACKER® Catalyst T 79 is the designated curing agent for ELASTOSIL® RT 779 silicone rubber from WACKER. This shear-thinning paste offers outstanding adhesion properties and enhances the oil resistance of ELASTOSIL® RT 779. The curing speed can be adjusted by altering the mixing ratio. Additionally, it provides excellent adhesion to a wide range of substrates, such as glass, ceramics, wood, metals, plastics, and powder coatings.

ELASTOSIL® RT 713 is a non-slump, addition-crosslinking, thermal-curing, one-component silicone rubber. It is a ready-to-use, one-part system that offers rapid heat cure. With its low density and low hardness, it provides high compressibility. It is also known for its primerless adhesion to many substrates, making it suitable for general-purpose sealant applications, as well as FIPG and CIPG applications.

WACKER® Silane M1-Triethoxy is a clear, colorless liquid with an odor characteristic of alcohols. The use of WACKER® Silane M1-Triethoxy to render fillers water repellent considerably improves their dispersibility and reduces their sedimentation tendency. Mineral-filled plastics can thus be processed more easily. Additionally, resistance to moisture and chemicals is much higher.

SILRES® BS 1702 is a solvent-free mixture of silane and siloxane that can be applied either in undiluted form or diluted with organic solvents. It is specifically designed as a high-quality specialty water repellent for impregnating fiber cement. When applied to fiber cement, SILRES® BS 1702 acts as an effective water repellent, helping to protect the material from moisture absorption and potential damage caused by water.

WACKER® Adhesion Promoter HF 86 is a solvent-free adhesion promoter specifically designed for enhancing the adhesion of addition-cured liquid silicone rubbers to textiles. It provides improved bonding between silicone rubbers and textiles, making it ideal for textile coatings. Additionally, it can be used as a textile primer in aqueous solutions. Notably, WACKER® Adhesion Promoter HF 86 is completely solvent-free.

ELASTOSIL® LR 3043/40 A/B A/B is a liquid silicone rubber of the ELASTOSIL® LR 3043 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® SOLAR 2203 is a pourable, addition-curing, RTV-2 silicone rubber used for potting, lamination, and encapsulation purposes. The product vulcanizes at room temperature to yield a very soft silicone gel. ELASTOSIL® SOLAR 2203 displays pronounced inherent tack and excellent long-term stability against weathering, moisture, and UV light. The soft silicone gel can continuously withstand changing climatic conditions, UV radiation, and temperatures up to 160°C (320°F) without damage.

SILRES® BS 310 is a solventless emulsion that can be thinned with water. It consists of polysiloxane modified with a functional silicone resin. This product is specifically designed to be added to aqueous masonry coatings and primers, either during or after their manufacture. When used undiluted, SILRES® BS 310 serves as an additive for aqueous indoor paints or coatings. Its purpose is to enhance the workability of the paint or coating, resulting in improved application properties. This product is highly compatible with indoor paints and has a positive influence on wetting and leveling properties.

ELASTOSIL® LR 3043/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3043 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

WACKER® AK 1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 1000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits low surface tension, resulting in high surface activity. Additionally, it is chemically highly unreactive and has a low solidifying point.