Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde Software Solutions
Formulations
Food & Nutrition
Food & Nutrition Formulations
View All
Cosmetics & Personal Care
Industries
Agriculture & Feed
Agriculture & Feed
View All
Adhesives & Sealants
Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Food & Nutrition
Healthcare & Pharma
HI&I Care
Industrial
Paints & Coatings
Personal Care
Printing & Packaging
Sustainability
Cosmetic Ingredients
Sustainable Cosmetic Ingredients
Food Ingredients
Plastics & Packaging
Cleaning Ingredients
CASE Ingredients
Products
Agrochemicals
Agrochemicals
View All
Animal Feed & Nutrition
Base Chemicals & Intermediates
CASE Ingredients
Cleaning Ingredients
Composite Materials
Cosmetic Ingredients
Elastomers
Fluids & Lubricants
Food Ingredients
Industrial Additives & Materials
Pharmaceuticals & Nutraceuticals
Pigments & Colorants
Plastics
Ready-to-Use Products
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde Software Solutions
Browse
Sample
Chat
Request
Search
Products
Wacker Chemie AG
Matching Products
Categories
(15)
Show All 15 Categories
Elastomers
CASE Ingredients
Industrial Additives & Materials
Ready-to-Use Products
Plastics
Cosmetic Ingredients
Cleaning Ingredients
Pigments & Colorants
Pharmaceuticals & Nutraceuticals
Composite Materials
Food Ingredients
Fluids & Lubricants
Agrochemicals
Base Chemicals & Intermediates
Animal Feed & Nutrition
Elastomers
CASE Ingredients
Industrial Additives & Materials
Ready-to-Use Products
Plastics
Cosmetic Ingredients
Cleaning Ingredients
Pigments & Colorants
Pharmaceuticals & Nutraceuticals
Composite Materials
Food Ingredients
Fluids & Lubricants
Agrochemicals
Base Chemicals & Intermediates
Animal Feed & Nutrition
Markets
Certifications & Compliance
Labeling Claims
Physical Form
Regional Availability
All Filters
1,327 Products
found on Wacker Chemie AG
Most Viewed
SDS
With SDS
TDS
With TDS
WACKER® Plasticizer 100
Chemical Family:
Silicones
Functions:
Plasticizer
Synonyms:
Hexadecanoic Acid
WACKER® Plasticizer 100 is a colorless, clear, and odorless liquid with a density of approximately 0.96 g/cm³ at 25°C. It is not soluble in water. This product is commonly used in silicone sealants. WACKER® Plasticizer 100 serves as a raw material for the production of RTV-1-silicone rubbers.
ELASTOSIL® LR 3846/20 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Low Volatility, Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Heat Stabilized
Tear Strength:
16.0 - 16.0 kN/m
ELASTOSIL® LR 3846/20 A/B is a considerable oil-bleeding, liquid silicone rubber of the ELASTOSIL® LR 3846 series. It is a paste-like, readily pigmentable, two-component product with a short curing time. Shortly after the curing process, a slight, thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque, have good mechanical and electrical properties, and have very low compression sets.
VINNAPAS® 827 ED
Functions:
Binder & Resin, Binder
Chemical Family:
Vinyl Acetate Ethylene (VAE) Copolymer, Vinyls, Vinylics & Vinyl Derivatives
End Uses:
Top Coat, Base Coat
VINNAPAS® 827 ED is an all-round construction dispersion for two-component dry mix mortars and ready-to-use dispersion-based construction products. It is specifically suitable for ETICS/EIFS applications as a cement admix dispersion or sole binder in ready-to-use ETICS/EIFS base or top coats. VINNAPAS® 827 ED is a semi-flexible, medium-particle-size synthetic resin dispersion based on a terpolymer of vinyl acetate, ethylene, and vinyl chloride, and it contains a protective colloid.
ELASTOSIL® R Plus 5305/70
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Battery Cable, Ignition Cables
Features:
Heat Stabilized, Platinum Catalyzed, Fast Curing, Good Mechanical Properties, High Consistency, Excellent Transparency Properties
Tear Strength:
42.0 - 42.0 kN/m
ELASTOSIL® R Plus 5305/70 is a platinum-catalyzed, addition-curing, two-part silicone rubber specifically designed for the manufacturing of extruded articles. Cured articles exhibit excellent transparency and very good mechanical properties. This silicone rubber is suitable for applications such as ignition and battery cables, utilizing addition curing and two-component systems.
POWERSIL® 310 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Injection Molding
End Uses:
Electrical Components, Arresters, Insulators, Arresters Housings, Bushings, Power Transformers
Features:
High Impact Resistance, Electrically Insulating, Good Erosion Resistance, Good Mechanical Properties, Excellent Hydrophobic Properties, Shock Resistant, Arc Resistant, Excellent Dielectric Properties, Light Weight, High LOI (Loss On Ignition), High Consistency, Tracking Resistant, Long Term Protection
Tear Strength:
11.0 - 11.0 kN/m
POWERSIL® 310 MH is a one-component, ready-to-use peroxide curing compound. It cures to form an electrically insulating silicone elastomer with high erosion resistance. This product exhibits very good arc resistance, suitable dielectric properties, and good mechanical properties. POWERSIL® 310 MH is specifically recommended for the production of various types of electrical insulating equipment used in outdoor applications, such as composite insulators, arrester housings, bushings, and more.
WACKER® AK 0,65
Chemical Name:
Hexamethyldisiloxane
CAS Number:
107-46-0
Functions:
Lubricant, Polishing Agent, Solvent, Intermediate, Release Agent
Chemical Family:
Siloxanes
Product Type:
Heat Transfer Fluid, Hydraulic Fluids
Synonyms:
Bis(trimethylsilyl)ether, Bis(trimethylsilyl)oxide, Oxybis(trimethylsilane)
WACKER® AK 0,65 is a hexamethyldisiloxane. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits good dielectric properties, low surface tension, high surface activity, and is chemically highly unreactive. Additionally, it has a low solidifying point.
ELASTOSIL® 7750 N
Product Type:
Solventborne Adhesive, 1K (1 component) Adhesive, Solvent free (100% Solids) Sealant
Application Area:
Window Frames
Compatible Substrates & Surfaces:
Copper, Zinc, Aluminum, Metal, Glass, Ceramic, Wood, Concrete, Steel, Plastics
Cure Method:
Chemical Cure, Air Dry, Moisture Cure
Chemical Family:
Silicones
ELASTOSIL® 7750 N is a one-component, neutral-curing, low-modulus silicone sealant with outstanding adhesion, a long shelf life, and excellent tooling characteristics for construction, glass, and window building, as well as industrial applications. ELASTOSIL® 7750 N cures at room temperature in the presence of atmospheric moisture to give a permanently flexible silicone rubber.
ELASTOSIL® AUX Mould Release Agent 32
Functions:
Mold Release Agent, Release Agent
Compatible Polymers & Resins:
Silicones
Processing Methods:
Compression Molding, Injection Molding
ELASTOSIL® AUX Mould Release Agent 32 is a mold release agent for LSR (liquid silicone rubber) and HTV (high-temperature vulcanizing) injection and compression molding. This product functions as an auxiliary that helps improve the demolding of tools for injection and compression molding.
HDK® V15
Chemical Family:
Silica
Functions:
Reinforcement, Thickener, Thixotrope, Rheology Modifier
Compatible Polymers & Resins:
Silicones
Physical Form:
Powder, Solid
Synonyms:
Fumed Silica, Silica, Silicon Dioxide
HDK® V15 is a standard synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity commonly used in various industrial applications. HDK® V15 finds its application as a thickening and thixotropic agent in silicone sealants. Additionally, it is used as a reinforcing filler in elastomers, particularly silicone elastomers.
ELASTOSIL® Color Paste FL Yellow RAL 1006
Functions:
Pigment
ELASTOSIL® Color Paste FL Yellow RAL 1006 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.
HDK® N20
INCI Name:
Silica
Chemical Name:
Pyrogenic Silica
CAS Number:
112945-52-5
Functions:
Rheology Modifier, Extender, Filler, Thixotrope, Viscosity Modifier, Reinforcement, Thickener
Chemical Family:
Silica
Synonyms:
Fumed Silica, Silica, Silicon Dioxide
HDK® N20 is a synthetic, hydrophilic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. This white colloidal powder offers high purity and serves multiple purposes. One of the primary applications of HDK® N20 is as a thickening and thixotropic agent in organic systems such as unsaturated polyesters, coatings, printing inks, adhesives, and cosmetics. Additionally, it functions as a reinforcing filler in elastomers, particularly silicone elastomers.
WACKER® AK 500
CAS Number:
9006-65-9
Functions:
Release Agent, Anti-Foaming Agent, Lubricant, Lubricant (Internal), Lubricant (External), Solvent, Polishing Agent, Water Repellent
Chemical Family:
Siloxanes
Product Type:
Hydraulic Fluids
Certifications & Compliance:
EC No.1907/2006, REACH Exempt (Europe)
Synonyms:
Dimethicone
WACKER® AK 500 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 500 mm²/s. Its chemical structure imparts exceptional properties that distinguish it from organic materials like mineral oils. WACKER® AK 500 exhibits excellent dielectric properties, low surface tension resulting in high surface activity, and a high degree of chemical inertness. These characteristics make it well-suited for various applications where these specific properties are required.
SEMICOSIL® HMDSO-EL
Chemical Family:
Silicones
Applicable Processes:
Semiconductor Manufacturing
Features:
Low Metal Content, Low Chloride Content
Synonyms:
Bis(trimethylsilyl)ether, Bis(trimethylsilyl)oxide, Oxybis(trimethylsilane)
SEMICOSIL® HMDSO-EL is a high-purity hexamethyldisiloxane (HMDSO) known for its exceptional purity, low metal content, and low chloride content. This product has been specifically developed to cater to the needs of the semiconductor industry. It finds applications in various processes such as chemical vapor deposition (CVD) and spin-on dielectrics (SOD).
ELASTOSIL® SOLAR 1109 White
Product Type:
Solvent free (100% Solids) Sealant, 1K (1 component) Adhesive
Compatible Substrates & Surfaces:
Metal
Cure Method:
Moisture Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® SOLAR 1109 White is a solvent-free and non-corrosive, one-part silicone adhesive that does not slump. Upon exposure to air moisture, ELASTOSIL® SOLAR 1109 White cures at room temperature, resulting in a permanently flexible silicone rubber with excellent mechanical properties. When fully cured, it exhibits long-term stability against weathering, moisture, and UV radiation. This silicone elastomer can withstand continuously changing climatic conditions, UV radiation, and temperatures as high as 180 °C (356 °F) without sustaining any damage.
WACKER® L 067
Functions:
Anti-Static Agent, Surfactant, Wetting Agent
Chemical Family:
Silicones, Siloxanes
Certifications & Compliance:
REACH (Europe)
WACKER® L 067 is a superspreading surfactant based on trisiloxane technology. Due to its unique structure, WACKER® L 067 exhibits high surface activity, allowing it to effectively wet and spread on almost any hydrophobic surface. It has versatile applications, including use as a tank-side adjuvant to improve spray coverage and uptake, or to reduce spray volume. It can also serve as an adjuvant in agrochemical formulations.
GENIOPLAST® Fluid FR
Chemical Family:
Silicones
Functions:
Flame Retardant
Compatible Polymers & Resins:
Polyolefins
End Uses:
Wires, Cables
GENIOPLAST® Fluid FR is a high-viscosity silicone formulation specifically designed as a polymer additive for polyolefins and other thermoplastic resins. It is composed of a linear silicone fluid with a dissolved silicone resin, resulting in a clear and colorless formulation. The primary application of GENIOPLAST® Fluid FR is in plastic additives.
ELASTOSIL® E14 Red
Application Area:
HVAC Ducts
Cure Method:
Moisture Cure, Chemical Cure
Chemical Family:
Silicones
ELASTOSIL® E14 Red is a non-sag acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent primerless adhesion to many substrates and outstanding heat stability even in long-term exposure. It meets the physical requirements of MIL-A-46106, Group I, Type I, and Group III, Type I.
ELASTOSIL® 6000
Product Type:
1K (1 component) Sealant
Application Area:
DIY Applications
Compatible Substrates & Surfaces:
Glass, Ceramic, Wood, Coated Surfaces
Cure Method:
Moisture Cure, Chemical Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® 6000 is a one-component, acid-curing silicone sealant for general-purpose sealing in do-it-yourself applications. ELASTOSIL® 6000 cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber. It adheres excellently to glass, vitrified surfaces, ceramic tiles, selected plastics, and most coatings.
ELASTOSIL® LR 3842/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Low Volatility, Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Oil Resistant, Heat Stabilized
Tear Strength:
25.0 - 25.0 kN/m
ELASTOSIL® LR 3842/40 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.
ELASTOSIL® Color Paste PT Black RAL 9005
Functions:
Pigment
ELASTOSIL® Color Paste PT Black RAL 9005 is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used to produce ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration, as may be observed for systems based on silicone oil.
ELASTOSIL® LR 3004/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Cables, Automobile Door Seals, Vibration Dampers
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Mechanical Properties, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:
35.0 - 35.0 kN/m
ELASTOSIL® LR 3004/40 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3004 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
WACKER® Polymer FD 120
Chemical Family:
Silicones
End Uses:
1K (1 Component) Sealant, 1K (1 component) Coating
Synonyms:
Di-Me hydroxy-terminated siloxanes, Hydroxy-terminated di-Me polysiloxanes, Hydroxy-terminated di-Me siloxanes, Silanol group-terminated polydimethylsiloxanes, Silanol-terminated di-Me polysiloxanes, Silanol-terminated di-Me siloxanes, Silanol-terminated di-Me siloxanes and silicones, Silanol-terminated dimethylpolysiloxanes, Silanol-terminated polydimethylsiloxanes
WACKER® Polymer FD 120 is a colorless, clear, and odorless liquid that is not miscible with water. It serves as a raw material for the production of RTV-1 silicone rubbers. This product is specifically used in the compounding of silicone sealants and is suitable for applications in sealants and silicone sealants.
SILRES® BS 6042
Functions:
Binder & Resin, Binder
Chemical Family:
Silicones
Features:
UV Resistance, Improves Coating Hiding Power , Water Resistance, Longer Performance Life
End Uses:
Plaster, Render, Top Coat
SILRES® BS 6042 is a solventless, water-dilutable emulsion of a modified silicone resin that is specifically designed to be used as a standalone silicone in the production of silicone resin emulsion paints and plasters. When incorporated into coatings, SILRES® BS 6042 imparts several beneficial properties. These include long-lasting reduced water absorption, efficient resistance to early rain, and high water vapor permeability. These characteristics contribute to the overall performance and durability of the coatings, ensuring they maintain their effectiveness over time.
ELASTOSIL® R Plus 4001/80 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding, Transfer Molding
End Uses:
Automotive Components
Features:
Odorless, Heat Stabilized, Food Contact Acceptable, Fast Curing, Good Mechanical Properties, High Consistency, Excellent Transparency Properties
Tear Strength:
29.0 - 29.0 kN/m
ELASTOSIL® R Plus 4001/80 MH is a one-component, high-consistency silicone rubber used for manufacturing molded articles. Cured articles made from this addition-cure rubber display high transparency and good to very good mechanical properties. This fast-curing silicone rubber exhibits excellent mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-cured materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.
Wacker Chemie 3-Chlorobutanone (3-Cl-MEK)
Chemical Name:
3-Chloro-2-butanone
Functions:
API Intermediate, Intermediate
CAS Number:
4091-39-8
Chemical Family:
Halogenated Compounds, Chlorinated Compounds
Wacker Chemie 3-Chlorobutanone (3-Cl-MEK) is a chlorinated intermediate. It is a colorless to brownish, mobile liquid with a pungent odor. This compound serves as a building block for various heterocycles and is used in the synthesis of pharmaceuticals like sulfamoxole, sulfisoxazole, and sulfoguanole. Additionally, it finds application in the synthesis of pesticides.
ELASTOSIL® RT 563
Product Type:
Potting Compound, Encapsulant, 2K (2 component) Sealant
Cure Method:
Moisture Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® RT 563 is a pourable, room-temperature-vulcanizing, condensation-curing, two-component silicone rubber. It exhibits excellent flow and high hardness. This product is specifically designed for encapsulating electronic components. To initiate the curing process, Catalyst T37 can be added for longer pot lives and curing times, or Catalyst T40 for shorter pot lives and curing times.
WACKER® 50550/8 VP
Functions:
Binder & Resin, Lubricant, Film Former, Friction Modifier
Chemical Family:
Silicones, Siloxanes
Certifications & Compliance:
REACH (Europe)
WACKER® 50550/8 VP is a waxy, alkyl-modified polysiloxane known for its hydrolysis resistance and strong affinity to different substrates. Primarily utilized in the polish sector, this product is particularly recommended for car polishes and paint conditioners. Its high substantivity ensures that the treated paint surface remains highly resistant to detergents and weathering over extended periods of time, providing long-lasting protection.
ELASTOSIL® LR 3066/30 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Bathroom Accessories
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Low Coefficient of Friction, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:
31.0 - 31.0 kN/m
ELASTOSIL® LR 3066/30 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3066 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. When compared to the ELASTOSIL® LR 3003 grade, the coefficient of friction is reduced by 50-70%. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
ELASTOSIL® R Plus 4000/60
Polymer Name:
Silicone Elastomer
End Uses:
Diving Masks
Features:
Tear Resistance, Heat Stabilized, Food Contact Acceptable, Fast Curing, High Consistency, Excellent Transparency Properties
Tear Strength:
50.0 - 50.0 kN/m
ELASTOSIL® R Plus 4000/60 is a two-component, high consistency silicone rubber designed for the production of molded articles. Once cured, these articles exhibit exceptional tear resistance and high transparency. This fast-curing silicone rubber demonstrates impressive elongation values and maintains excellent tear resistance. The addition cure process enables a significantly faster vulcanization reaction compared to peroxide curing materials. Furthermore, no peroxide decomposition products are formed during vulcanization.
ELASTOSIL® LR 3671/30 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Bathroom Accessories
Features:
Pigmentable, Low VOC, Cost Effective, Good Electrical Properties, Food Contact Acceptable, Low Volatility, Fast Curing, Low Coefficient of Friction, Good Mechanical Properties
Tear Strength:
29.0 - 29.0 kN/m
ELASTOSIL® LR 3671/30 A/B is a self-adhesive liquid silicone rubber from the ELASTOSIL® 3671 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time and good mechanical and electrical properties. The vulcanizates of this product are known for their self-adhesive properties to various substrates as well as their low coefficient of friction.
WACKER® L 066
Chemical Family:
Siloxanes, Silicones
Functions:
Anti-Static Agent, Wetting Agent
Certifications & Compliance:
REACH (Europe)
WACKER® L 066 is a 100% polysiloxane polyethylene glycol copolymer. WACKER® L 066 exhibits unique high surface activity, which allows it to wet and spread effectively on nearly any surface. WACKER® L 066 is primarily used for lowering the surface tension of aqueous and non-aqueous solutions, as a highly effective wetting agent, and for the hydrophilic treatment of numerous materials and surfaces.
ELASTOSIL® R 573/50 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Battery Cable
Features:
Electrically Conductive, High Consistency, Low Volume Resistivity
Tear Strength:
13.0 - 13.0 kN/m
ELASTOSIL® R 573/50 A/B is a two-component, electrically conductive HCR silicone rubber for the manufacture of electrically conductive products. This product is an addition-cured electrically conductive HCR silicone rubber that shows a low volume resistivity. This product can be used within a temperature range of -55 °C to +210 °C.
ELASTOSIL® R Plus 4050/55 MH 9005
Polymer Name:
Silicone Elastomer
End Uses:
Household Goods
Features:
Low Compression Set, Heat Resistance, Food Contact Acceptable, Good Thermal Stability, High Resilience, High Consistency
Tear Strength:
23.0 - 23.0 kN/m
ELASTOSIL® R Plus 4050/55 MH 9005 is an addition-cure, one-component high consistency silicone rubber specifically designed for the manufacture of molded articles. The vulcanizates of this silicone rubber exhibit excellent heat stability. ELASTOSIL® R Plus 4050/55 MH 9005 is suitable for various household applications.
BELSIL® DM 1000000
INCI Name:
Dimethicone
Functions:
Film Former
Benefit Claims:
Excellent Flexibility, Suppleness, Long Lasting, Silky Feel, Smooth Feel, Humidity defying, Soft Feel, Improves Hydrophobic Properties, Moisturizing, White Residue Reduction, Good Wet Combing, Pleasant Feel, Shine Enhancing, Viscosity Boosting, Volumizing, Non-Sticky, Emolliency, Non-Tacky, Skin Protection, Water Repellency, Spreadability, High Viscosity, Good Dry Combing, Softening, Film Forming, Lustrous
Labeling Claims:
Credo Clean Standard, Clean at Sephora, Cruelty-Free, Ulta Beauty's Conscious Beauty
Certifications & Compliance:
Cruelty-Free
BELSIL® DM 1000000 is a linear, non-reactive, unmodified polydimethylsiloxane. It is a dimethicone with a high viscosity of 1000000 mm²/s. It exhibits low surface tension and a high spreading coefficient. Its flexible polymer backbone grants it high permeability to gasses such as water vapor and oxygen. This permeability enables the skin to respire.
ELASTOSIL® AUX G 3243
Product Type:
Primer, Solventborne Coating
Compatible Substrates & Surfaces:
Ceramic, Plastics, Silicon, Metal, Glass
Features:
Excellent Substrate Adhesion, General Purpose
Application Method:
Brush, Dip Coating, Spray
Chemical Family:
Siloxanes, Silanes
ELASTOSIL® AUX G 3243 is a solvent-based mixture of siloxanes and reactive silanes used as adhesion promoters for silicone rubbers. It is used to pretreat metallic, ceramic, glass, or other polymeric substrate surfaces to enable excellent adhesion towards subsequently vulcanized ELASTOSIL® R solid silicone elastomers (HCR/HTV, peroxide curing).
ELASTOSIL® Color Paste FL Light Blue RAL 5015
Functions:
Pigment
ELASTOSIL® Color Paste FL Light Blue RAL 5015 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.
Show
36
of 1,327 results
Go to page
1
2
3
...
17
18
19
...
37