Products

WACKER® Silicone Paste P 300 is an opaque paste with a medium to soft consistency and slight thixotropic properties. It possesses good electrical properties, including insulation, relative permittivity, and electric strength. Additionally, it exhibits strong adhesion to metals and ceramic materials. When applied as a coating, WACKER® Silicone Paste P 300 provides excellent water repellency, offering a certain level of protection against corrosion. The paste's low viscosity makes it easy to use as an embedding compound, release agent, or lubricant in various applications.

ELASTOSIL® A 4 is a carbon dioxide-vulcanizing, solventless, one-component, curable elastomer designed for silk screen applications. It is a moisture-curing material with a very long shelf life. Once ELASTOSIL® A 4 is in place on the substrate, the cure may be induced by exposure to a combination of carbon dioxide and moisture. Adhesion may be improved by mildly preheating the substrate.

WACKER® AK 200 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 200.000 mm²/s. It is enhanced with a special heat stabilizer that safeguards the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 200 000 STAB is particularly well-suited for applications that entail high temperatures and/or shear stress. It exhibits long-term heat stability, making it suitable for operating temperatures exceeding 150 °C, and it demonstrates high shear stability.

ELASTOSIL® AUX G 3242 is a solvent-based mixture of siloxanes and reactive silanes used as adhesion promoters for silicone rubbers. It is used to pretreat metallic, ceramic, glass, or other polymeric substrate surfaces to enable excellent adhesion towards subsequently vulcanized ELASTOSIL® R solid silicone elastomers (HCR/HTV, peroxide curing).

SEMICOSIL® 986/1K is a thermally curable, one-part silicone rubber known for its non-slump properties. It is a ready-to-use system, requiring no additional mixing. The silicone rubber is thixotropic in nature and exhibits a translucent appearance. SEMICOSIL® 986/1K possesses medium hardness and high flexibility, making it suitable as a low-stress adhesive. It offers primerless adhesion to various substrates. Furthermore, this silicone rubber undergoes rapid heat curing and features ultraviolet fluorescence properties.

ELASTOSIL® 4710 is a 100% silicone, one-component, acid-curing silicone sealant for sealing joints in food and drinking water contact applications. This versatile product cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

WACKER® AK 100 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 100,000 mm²/s. It is formulated with a special heat stabilizer that safeguards the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 100 000 STAB is particularly well-suited for applications involving high temperatures and/or shear stress. It is a non-polar liquid with a low solidification point and exhibits good dielectric properties.

ELASTOSIL® RT 771 is a self-leveling, condensation-curing RTV-2 silicone adhesive. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 771 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can continuously withstand changing climatic conditions, UV radiation, and temperatures up to 180°C (356°F) without damage.

SEMICOSIL® 987 GR is a one-part, ready-to-use, thermally curable silicone elastomer that exhibits non-slump properties. It is primarily used as a sealing adhesive. The silicone is thixotropic in nature, allowing for easy application and shaping. It offers high flexibility, making it suitable for low-stress adhesive bonding, such as in molded-in-place gasket (FIPG) applications. Additionally, SEMICOSIL® 987 GR provides primerless adhesion to a wide range of substrates.

ELASTOSIL® E209 is a one-component silicone rubber with low viscosity that cures at room temperature under the influence of atmospheric humidity. It has a flowable consistency and utilizes an acetoxy-cure mechanism. ELASTOSIL E209 demonstrates good primerless adhesion to a variety of substrates. For optimal results in specific applications, it is recommended to conduct preliminary tests to optimize the conditions.

ELASTOSIL® SOLAR 2202 A/B is a pourable, addition-curing, RTV-2 silicone rubber used for potting, lamination, and encapsulation purposes. The product vulcanizes at room temperature to yield a very soft silicone gel. Cured ELASTOSIL® SOLAR 2202 A/B demonstrates pronounced inherent tack and excellent long-term stability against weathering, moisture, and sunlight. The soft silicone gel can continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 160°C (320°F) without damage.

GENIOSIL® GF 56 is an alkoxyvinylsilane. It is a clear, colorless liquid with a distinctive aromatic odor. In the presence of moisture, it undergoes hydrolysis (releasing ethanol) to form silanols, which can further react with each other to generate siloxanes. Acting as a bifunctional molecule, GENIOSIL® GF 56 serves as a molecular bridge between organic and inorganic substrates.

WACKER® AK 12500 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 12500 mm²/s. Its chemical structure gives it exceptional properties that distinguish it from organic materials like mineral oils. It exhibits minimal changes in physical properties over a broad temperature range, excellent water-repellent properties, and good dielectric properties.

SEMICOSIL® 920 LT A/B is a pourable, addition-curing, two-part silicone rubber that cures to a soft silicone gel. It has a 1:1 mixing ratio and exhibits very low viscosity, making it easy to handle and process. This product offers fast curing and forms a soft gel during vulcanization. SEMICOSIL® 920 LT A/B maintains almost constant properties within a wide temperature range, from -100 °C to +200 °C. Additionally, it has a low ion content, ensuring high purity in applications.

SEMICOSIL® 9882 A/B is a two-component silicone rubber adhesive that exhibits thixotropic properties and cures at moderate temperatures. It has a thixotropic, pasty consistency, making it easy to apply and work with. This adhesive offers low hardness and low modulus, resulting in excellent compression-set properties and high elongation.

SILRES® BS 710 is a permanent anti-graffiti coating designed to protect concrete, masonry, wood, and pre-existing coatings. It is based on polyorganosiloxanes and provides excellent performance against exterior elements such as rain, sun, and temperature extremes. SILRES® BS 710 is a single-component product that cures at room temperature with ambient moisture. The cured coating offers excellent release properties and ease of removal for most permanent markers and aerosol paints.

WACKER® AK 0,65 is a hexamethyldisiloxane. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits good dielectric properties, low surface tension, high surface activity, and is chemically highly unreactive. Additionally, it has a low solidifying point.

POWERSIL® 79032 is an electrically conductive silicone rubber dispersion in xylene. It serves as both a conductive coating and an adhesion-promoting primer. This product is supplied as a ready-to-use, one-component system, making it convenient for application. It exhibits low volume resistivity and acts as an effective adhesion promoter. POWERSIL® 79032 is suitable for various coating techniques, including dipping, brushing, and spraying.

ELASTOSIL® N288 is a low-viscosity, ready-to-use, neutral crosslinking silicone rubber. It cures at room temperature under the influence of atmospheric moisture. It exhibits excellent heat stability, excellent primerless adhesion to many substrates, permanent temperature exposure up to 200 °C, and peak temperatures up to 250°C.

ELASTOSIL® SC 870 A/B is a two-part silicone rubber designed for creating a thixotropic, addition-curing foam. The foam structure consists primarily of closed cells. This product is particularly well-suited for use with automatic dispensing equipment during processing. Its exceptional rheology allows for the production of CIPG foam gaskets, even in complex 3D geometries.

ELASTOSIL® E303 Transluzent is an acetoxy-cure, free-flowable, solvent-based RTV-1 silicone dispersion. It cures at room temperature or at elevated temperatures by reacting with air humidity to form a flexible silicone coating. A typical application is the selective coating of heat exchangers (automotive radiators).

ELASTOSIL® RT 708 is a self-leveling, slightly thixotropic, one-part silicone that cures with heat. It is designed for potting and coating applications and can also be used as a surface adhesive when applied in a thin layer, such as through silk-screen printing. Once cured, ELASTOSIL® RT 708 exhibits excellent adhesion to various substrates and offers long-term stability against weathering, moisture, and UV light. The cured silicone rubber can withstand continuously changing climatic conditions, UV radiation, and temperatures as high as 230 °C (446 °F) without sustaining any damage.

ELASTOSIL® N9111 White is a non-slump, non-corossive, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. It is a multipurpose sealant and adhesive for the appliance, automotive, and electronics industries. Due to its shear-thinning nature, ELASTOSIL® N9111 White is easy to apply. The material starts curing upon contact with air humidity.

ELASTOSIL® RT 702 is a one-part heat-curing silicone adhesive that exhibits non-slump properties. Once cured, ELASTOSIL® RT 702 demonstrates excellent adhesion to a wide range of substrates, along with long-term stability against weathering, moisture, and UV light. The cured silicone rubber can withstand constant exposure to varying climatic conditions, UV radiation, and temperatures up to 250 °C (482 °F) without sustaining any damage.

ELASTOSIL® N294 is a free-flowing, ready-to-use silicone rubber that vulcanizes either at room temperature or at high temperatures under the influence of atmospheric moisture. ELASTOSIL® N294 is available in blue and red colors. It is particularly suited for screen printing.

ELASTOSIL® 4500 is a one-component, acid-curing silicone finished sealant for general-purpose sealing in high-temperature applications up to 250°C. This non-sag, ready-to-use construction sealant cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

ELASTOSIL® RT 604 A/B is a pourable, addition-curing two-part silicone rubber that vulcanizes at room temperature. It is a highly transparent, flowable material with very low viscosity. This two-component general-purpose encapsulant features rapid heat cure, low hardness, and a crystal-clear appearance.

WACKER® AK 20 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 20 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It is chemically highly unreactive, has a low solidifying point, and exhibits high heat resistance.

ELASTOSIL® AUX G 3243 is a solvent-based mixture of siloxanes and reactive silanes used as adhesion promoters for silicone rubbers. It is used to pretreat metallic, ceramic, glass, or other polymeric substrate surfaces to enable excellent adhesion towards subsequently vulcanized ELASTOSIL® R solid silicone elastomers (HCR/HTV, peroxide curing).

ELASTOSIL® SOLAR 1109 Black is a one-part, non-slump silicone adhesive that does not contain solvents and is non-corrosive. Upon exposure to air moisture, it cures at room temperature, forming a permanently flexible silicone rubber with excellent mechanical properties. The fully cured ELASTOSIL® SOLAR 1109 Black demonstrates exceptional long-term stability against weathering, moisture, and UV radiation. This silicone elastomer can withstand continuously changing climatic conditions, UV radiation, and temperatures as high as 180 °C (356 °F) without experiencing any damage.

WACKER® AK 150 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 150,000 mm²/s. It is enriched with a special heat stabilizer that shields the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 150 000 STAB is especially well-suited for applications involving high temperatures and/or shear stress. It is a non-polar liquid with a low solidification point and exhibits good dielectric properties.

SILRES® BS 68 is a solvent-thinnable silane/siloxane mixture. It is used in diluted form for the hydrophobic impregnation of mineral construction materials and as a primer for mineral substrates. The concentrated product is also employed in the manufacturing of bitumen-bound minerals or as a binder for mineral systems. The product develops its hydrophobic effect through a reaction with atmospheric moisture or water adsorbed onto the pores and capillary walls of the construction material. SILRES® BS 68 is characterized by higher alkali resistance compared to pure methyl silicone resins, and the water vapor permeability of the construction material is only slightly affected.

SILRES® BS SMK 1311 is a solventless silicone microemulsion concentrate based on silanes and siloxanes that is diluted with water to yield microemulsions. The dilute aqueous solution of SILRES® BS SMK 1311 serves as a high-quality, general-purpose water repellent for impregnating and priming mineral and even alkaline substrates. SILRES® BS SMK 1311 also serves as a chemical damp-proofing agent in a diluted aqueous solution.

SILRES® BS 4004 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 4004 serve as high-quality general-purpose water repellents for hydrophobic impregnation and priming of mineral surfaces. Treated mineral substrates exhibit an excellent beading effect. Additionally, SILRES® BS 4004 can be used for mass hydrophobation of non-load-bearing concrete products.

ELASTOSIL® RT 774 is a non-slump, condensation-curing RTV-2 silicone. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 774 offers excellent long-term stability against weathering, moisture, and UV light. The compressible silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures as high as 140°C (284°F) without damage.

WACKER® AK 1 000 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 1,000,000 mm²/s. It is formulated with a special heat stabilizer that protects the silicone fluid from thermal decomposition and viscosity changes. As a result, WACKER® AK 1 000 000 STAB is well-suited for applications involving high temperatures and/or shear stress. It has a low solidification point, good dielectric properties, a high flash point, and is chemically inert.