Products

ELASTOSIL® 7100 P is a one-component, neutral-curing, low-modulus silicone sealant with outstanding adhesion and a long shelf life for construction, glazing and window applications, industrial applications, and sanitary areas. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

SILRES® BS 17040 is a high-quality, water-thinnable silane emulsion that is solvent-free. It is specifically formulated to act as a water repellent for impregnating and priming alkaline mineral surfaces. Additionally, it can be used as a water-resisting admixture for non-load-bearing manufactured concrete products.

ELASTOSIL® SC 835 A/B is a two-component silicone rubber that is flowable and addition-curing. It is specifically designed to form a closed cell foam structure. This material is highly compatible with automatic dispensing equipment, making it easy to process. ELASTOSIL® SC 835 A/B is ideal for the production of heat-resistant foam gaskets in a flat design, particularly for use in CIPG (Cured-in-Place Gasket) applications.

ELASTOSIL® E47 Transparent is a non-slump, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows particularly excellent adhesion to cured silicone elastomers. Vulcanization can be accelerated by elevated temperatures (up to 80°C).

HELISOL® XLP is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 35 mm²/s. Its unique chemical structure gives HELISOL® XLP exceptional properties that distinguish it from organic materials like mineral oils. This clear, odorless, and colorless liquid exhibits an outstanding property profile.

SEMICOSIL® 9242 is a pourable, thermally curable, addition-curing one-part silicone rubber that cures to a very soft silicone gel. This product is ready-to-use, requiring no additional mixing. It exhibits thixotropic behavior, meaning it becomes shear-thinning during application. SEMICOSIL® 9242 offers rapid heat curing, allowing for efficient processing. Upon vulcanization, it forms a soft gel. With low levels of volatiles, uncured polymers, and ions, this silicone rubber ensures high purity. Additionally, SEMICOSIL® 9242 has the additional feature of ultraviolet fluorescence.

ELASTOSIL® E70 is a flowable, one-component, acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent primerless adhesion to many substrates and outstanding heat stability even in long-term exposure. It is a high-temperature-resistant grade for sealing and bonding applications under high thermal stress.

ELASTOSIL® A 442 is a one-component, thixotropic sealant intended for use where a soft, high-elongation material is to be used. It is particularly effective as an adhesive in applications where the bonded joint is subjected to relatively large movements in service.

ELASTOSIL® RT 772 is a flowable, condensation-curing RTV-2 silicone used for potting and coating applications. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 772 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can endure constantly changing climatic conditions, UV radiation, and temperatures as high as 230°C (446°F) without damage.

POWERSIL® 567 is a one-component silicone dispersion that, upon curing, forms a durable high-voltage insulator coating with excellent electrical properties. It exhibits very good resistance to weathering and outstanding tracking resistance. Moreover, POWERSIL® 567 creates a long-term hydrophobic surface, effectively preventing the formation of wet conductive films and reducing the risk of pollution flashovers.

SILRES® BS SMK 1311 is a solventless silicone microemulsion concentrate based on silanes and siloxanes that is diluted with water to yield microemulsions. The dilute aqueous solution of SILRES® BS SMK 1311 serves as a high-quality, general-purpose water repellent for impregnating and priming mineral and even alkaline substrates. SILRES® BS SMK 1311 also serves as a chemical damp-proofing agent in a diluted aqueous solution.

ELASTOSIL® SOLAR 1109 Black is a one-part, non-slump silicone adhesive that does not contain solvents and is non-corrosive. Upon exposure to air moisture, it cures at room temperature, forming a permanently flexible silicone rubber with excellent mechanical properties. The fully cured ELASTOSIL® SOLAR 1109 Black demonstrates exceptional long-term stability against weathering, moisture, and UV radiation. This silicone elastomer can withstand continuously changing climatic conditions, UV radiation, and temperatures as high as 180 °C (356 °F) without experiencing any damage.

ELASTOSIL® AUX G 3243 is a solvent-based mixture of siloxanes and reactive silanes used as adhesion promoters for silicone rubbers. It is used to pretreat metallic, ceramic, glass, or other polymeric substrate surfaces to enable excellent adhesion towards subsequently vulcanized ELASTOSIL® R solid silicone elastomers (HCR/HTV, peroxide curing).

SILRES® BS 4004 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 4004 serve as high-quality general-purpose water repellents for hydrophobic impregnation and priming of mineral surfaces. Treated mineral substrates exhibit an excellent beading effect. Additionally, SILRES® BS 4004 can be used for mass hydrophobation of non-load-bearing concrete products.

SILRES® BS 68 is a solvent-thinnable silane/siloxane mixture. It is used in diluted form for the hydrophobic impregnation of mineral construction materials and as a primer for mineral substrates. The concentrated product is also employed in the manufacturing of bitumen-bound minerals or as a binder for mineral systems. The product develops its hydrophobic effect through a reaction with atmospheric moisture or water adsorbed onto the pores and capillary walls of the construction material. SILRES® BS 68 is characterized by higher alkali resistance compared to pure methyl silicone resins, and the water vapor permeability of the construction material is only slightly affected.

ELASTOSIL® 8000 N is a one-part, neutral-curing, low-modulus silicone sealant with excellent adhesion and a long shelf life for perimeter sealing and glazing applications. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

WACKER® AK 10000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 10000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It possesses good dielectric properties, low surface tension resulting in high surface activity, and it is chemically highly unreactive.

ELASTOSIL N199 TRANSPARENT is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. ELASTOSIL® N199 Transparent exhibits excellent primerless adhesion to many substrates with high tear strength. It is a multipurpose adhesive and sealant for the electronics industry, with typical uses for CIPG- and FIPG-applications.

ELASTOSIL® A33 Ivory is a moisture-curing silicone rubber (RTV-1) that does not slump and cures at room temperature. It releases an organic amine during the vulcanization process. ELASTOSIL® A33 demonstrates excellent primerless adhesion to a wide range of substrates. This multipurpose grade is suitable for sealing and bonding applications, offering resistance to high temperatures and contact with oil.

ELASTOSIL® RT 745 S" A/B" is a pourable, two-part silicone rubber that can be thermally cured. It is an addition-curing type, making it suitable for various applications. Some notable industries where it finds use are automotive, electronics, and measurement and control. Specifically, it is employed in potting and encapsulation processes, ensuring the protection and stability of sensitive components and systems.

ELASTOSIL® 6100 is a one-component, acid-curing, non-sag silicone sealant for general purpose sealing in do-it-yourself (DIY) applications, especially in sanitary areas. ELASTOSIL® 6100 cures at room temperature in the presence of atmospheric moisture to give a permanently flexible silicone rubber.

ELASTOSIL® SOLAR 2203 is a pourable, addition-curing, RTV-2 silicone rubber used for potting, lamination, and encapsulation purposes. The product vulcanizes at room temperature to yield a very soft silicone gel. ELASTOSIL® SOLAR 2203 displays pronounced inherent tack and excellent long-term stability against weathering, moisture, and UV light. The soft silicone gel can continuously withstand changing climatic conditions, UV radiation, and temperatures up to 160°C (320°F) without damage.

POWERSIL® N 552 White is a one-component silicone dispersion that cures to form a tough high-voltage insulator coating with excellent electrical properties. It offers very good resistance to weathering and outstanding tracking resistance, ensuring its performance in various environmental conditions. Additionally, POWERSIL® N 552 White forms a long-term hydrophobic surface, effectively preventing the formation of wet conductive films and minimizing the risk of pollution flashovers.

SILRES® BS 1802 is an admixture for the integral waterproofing of fresh concrete in its undiluted form. Additionally, it can be utilized as a water-resisting admixture for non-load-bearing manufactured concrete products. SILRES® BS 1802 effectively prolongs the service life of concrete structures by inhibiting the alkali-silica reaction (ASR).

WACKER® Primer G 790 Toluene Free is a solution of reactive siloxanes and silanes in an organic solvent. It is specifically formulated to be free of toluene and other aromatic solvents. The primer can be applied directly to the substrate or diluted if desired. As the solvent evaporates and when exposed to ambient humidity, the primer forms a rigid film that firmly adheres to the substrate. By applying a silicone rubber onto the primed substrate and subsequently vulcanizing it, a strong bond is achieved between the silicone rubber and the substrate.

ELASTOSIL® eco 4100 is a one-component, acid-curing, low-modulus silicone sealant with outstanding adhesion and a long shelf life for construction, glazing, and window applications, as well as sanitary applications. ELASTOSIL® eco 4100 is produced based on a 100% exchange of fossil-based raw materials for sustainably certified renewable materials. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

ELASTOSIL® RT 480 is a spreadable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature. It is commonly used in industrial assembly and reproduction molding applications. This silicone rubber exhibits condensation-curing properties, allowing for fast curing at room temperature. It has a spreadable and self-leveling flow, making it easy to work with. ELASTOSIL® RT 480 is a two-component product that provides reliable results in various applications.

ELASTOSIL® A59 Grey 01 is a self-leveling, one-component, amine-cure formulation that cures at room temperature by reaction with air humidity to form a flexible and durable silicone elastomer. It is particularly suited for screen printing on gaskets. The curing rate can be accelerated by heat exposure or exposure to carbon dioxide concentrations above 1% p.b.v.

ELASTOSIL® N 2034 is a self-leveling, alkoxy-cure, one-component silicone sealant that cures at room temperature under the influence of moisture. It shows excellent primerless adhesion to many substrates. This product is flame retardant and meets the UL 94 V-0 standards.

ELASTOSIL® 5000 is a one-component, acid-curing, low-modulus silicone sealant with outstanding adhesion, a long shelf life, and very good processing properties for construction and industrial applications. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

ELASTOSIL® E11 Transparent is a flowable silicone rubber with very good mechanical properties that cures at room temperature under the influence of atmospheric moisture. Perfectly suited for lamination, coating, and thin-film potting, the material reliably fills small gaps and voids thanks to its self-leveling properties.

ELASTOSIL® RT K is a pourable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature. It is specifically designed for reproduction molding applications. This silicone rubber utilizes condensation-curing technology and has a low viscosity, making it easy to pour and work with. ELASTOSIL® RT K is a two-component product, ensuring proper curing and performance. It is well-suited for reproduction molding processes.

ELASTOSIL® N 2199 is a one-part, ready-to-use, acid- and solvent-free, non-corrosive RTV-1 non-slumping paste that cures at room temperature to a permanently flexible silicone rubber on exposure to atmospheric moisture. It shows excellent adhesion to a broad variety of substrates.

ELASTOSIL® RT 713 is a non-slump, addition-crosslinking, thermal-curing, one-component silicone rubber. It is a ready-to-use, one-part system that offers rapid heat cure. With its low density and low hardness, it provides high compressibility. It is also known for its primerless adhesion to many substrates, making it suitable for general-purpose sealant applications, as well as FIPG and CIPG applications.

WACKER® AKF 10000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 10000 mm²/s. Its chemical structure gives it a unique set of special properties that distinguish it from organic materials, such as mineral oils. Notably, WACKER® AKF 10000 stands out for its very low volatile content, high purity, and excellent release properties.

SILRES® BS 5137 is a highly efficient aqueous and water-dilutable emulsion of reactive polydimethylsiloxane. It is used to provide water repellency to glass wool (fiberglass) or stone wool bound with phenolic resin. It can also be utilized for expanded minerals such as perlite, vermiculite, or expanded clay aggregates.