Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Specific Features
- Lubricant
- Thixotropic
Applications & Uses
- Markets
- Applications
- Application Area
- Plastics & Elastomers End Uses
- Applications
- Cable Accessories
- Transmission & Distribution
- Energy
- Applications involving movement of elastomers or plastics against metals
- Lubricants for shut-off valves, control devices, joints
- Release agents for compression molding, extruder die rings
- Insulation for ignition systems (car electrics), protection against moisture, embedding of electronic components
- Installation of cable accessories
Properties
- Color
- Typical Properties
- Properties
- Non-curing, with retention of pasty consistency
- Water resistant, water repellent
- Electrically insulating
- Good surface slip
- High dielectric strength
- Good adhesion to metals, glass and ceramics
| Value | Units | Test Method / Conditions | |
| Bleeding (at 30hours, 200°C) | max. 5.0 | % | FED-STD 791 M 321 |
| Density (at 25°C) | 1 | g/cm³ | DIN EN ISO 1183-1 A |
| Dielectric Strength | 20 | kV/mm | IEC 60243-1 |
| Dissipation Factor (tan δ, at 50Hz) | 7 x 10⁻³ | — | IEC 62631-2-1 |
| Loss of Weight (at 200°C, 30 hours) | max. 3.5 | % | FED-STD 791 M 321 |
| Operating Temperature | -40 to - 150 | °C | — |
| Penetration (unworked, 150g cone, 5s penetration time) | 29 - 33 | mm | DIN ISO 2137 |
| Permittivity (at 50Hz) | 3.1 | — | IEC 62631-2-1 |
| Solidification Point | approx. -45 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage Information
Store in a dry and cool place.