Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Special Features
- Acetoxy-cure
- Primerless adhesion to most substrates
Applications & Uses
- Markets
- Applications
- Application Area
- Cure Method
- Applications
Energy
- Application Details
Processing
ELASTOSIL® E209 shows good primerless adhesion to many substrates. We recommend running preliminary tests to optimize conditions for the particular application.
Properties
- Typical Properties
- Properties
- Low viscosity
- Flowable
- Note
Cured properties are cured at 2 mm, 14d / 23 °C / 50 % relative humidity.
Value | Units | Test Method / Conditions | |
Density (at 23°C) | 1.05 | g/cm³ | DIN EN ISO 1183-1 A |
Dynamic Viscosity (at 23°C, Spindle 5, 10 rpm) | approx. 25000 | mPa·s | Brookfield |
Shore Hardness A | 30 | — | DIN ISO 48-4 |
Skin Formating Time (at 23°C) | 7 - 10 | minutes | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety Note
- During vulcanization of ELASTOSIL® E209, small amounts of acetic acid is split off. These vapors should not be inhaled for long periods or in high concentration.
- Work areas should therefore be well ventilated. Contact of unvulcanized silicone rubber with eyes and mucous membranes must be avoided as this would cause irritation. However if it does happen, rinse the affected area thoroughly with water.
Packaging & Availability
- Country Availability
- Regional Availability