Products

POWERSIL® 552 Browngreen is a one-component silicone dispersion that, upon curing, forms a tough high voltage insulator coating with excellent electrical properties. It exhibits very good resistance to weathering and outstanding tracking resistance. Additionally, POWERSIL® 552 Browngreen creates a long-term hydrophobic surface, preventing the formation of wet conductive films and minimizing the risk of pollution flashovers.

BELSIL® DM 100000 is a linear, non-reactive, unmodified polydimethylsiloxane. It is a dimethicone with a viscosity of 100,000 mm²/s, characterized by low surface tension and a high spreading coefficient. Due to its flexible polymer backbone, this dimethicone has high permeability to gasses (e.g. water, vapor, oxygen), which allows respiration of the skin.

POWERSIL® 3525 MH silicone rubber is a one-component, ready-to-use, addition-curing compound that produces an electrically insulating, highly erosion-resistant silicone elastomer upon curing. Compared to conventional silicone rubber, it shows fast curing, with curing time being reduced by 30 to 50% depending on wall thickness and available machinery and runner system. No peroxide decomposition products are released during the curing process.

ELASTOSIL® Color Paste PT Red RAL 3000 is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used to produce ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration, as may be observed for systems based on silicone oil.

BELSIL® DM 500000 is a linear, non-reactive, unmodified polydimethylsiloxane. It is a dimethicone with a viscosity of 500,000 mm²/s. BELSIL® DM 500000 is characterized by low surface tension and a high spreading coefficient. Due to its flexible polymer backbone, this dimethicone exhibits high permeability to gasses such as water vapor and oxygen, enabling the skin to breathe.

ELASTOSIL® LR 3094/60 A/B is a paste-like, two-component compound of liquid silicone rubber with extremely short curing times. The vulcanizates of the product are noted for good mechanical as well as electrical properties and for excellent heat resistance. Due to the outstanding compression set, there is no need to post-cure technical parts.

ELASTOSIL® 6100 is a one-component, acid-curing, non-sag silicone sealant for general purpose sealing in do-it-yourself (DIY) applications, especially in sanitary areas. ELASTOSIL® 6100 cures at room temperature in the presence of atmospheric moisture to give a permanently flexible silicone rubber.

VINNAPAS® EN 428 is a self-crosslinking, plasticizer-free, aqueous polymer dispersion based on vinyl acetate and ethylene monomers. It offers a unique combination of softness, high wet strength, and versatile formulation options. The film formed by VINNAPAS® EN 428 has a soft texture, making it an excellent choice as a binder for personal hygiene nonwovens. Additionally, it can be used as a coating and finishing agent for woven and knitted textiles, providing enhanced properties and performance.

ELASTOSIL® SOLAR 1200 is a non-slump, condensation-curing RTV-2 silicone adhesive designed for the solar industry. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® SOLAR 1200 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can endure constantly changing climatic conditions, UV radiation, and temperatures as high as 180°C (356°F) without damage.

WACKER® AK 200 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 200.000 mm²/s. It is enhanced with a special heat stabilizer that safeguards the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 200 000 STAB is particularly well-suited for applications that entail high temperatures and/or shear stress. It exhibits long-term heat stability, making it suitable for operating temperatures exceeding 150 °C, and it demonstrates high shear stability.

ELASTOSIL® Color Paste FL Black RAL 9011 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® LR 3066/30 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3066 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. When compared to the ELASTOSIL® LR 3003 grade, the coefficient of friction is reduced by 50-70%. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® R Plus 4000/60 is a two-component, high consistency silicone rubber designed for the production of molded articles. Once cured, these articles exhibit exceptional tear resistance and high transparency. This fast-curing silicone rubber demonstrates impressive elongation values and maintains excellent tear resistance. The addition cure process enables a significantly faster vulcanization reaction compared to peroxide curing materials. Furthermore, no peroxide decomposition products are formed during vulcanization.

WACKER® AK 150 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 150,000 mm²/s. It is enriched with a special heat stabilizer that shields the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 150 000 STAB is especially well-suited for applications involving high temperatures and/or shear stress. It is a non-polar liquid with a low solidification point and exhibits good dielectric properties.

ELASTOSIL® LR 3671/30 A/B is a self-adhesive liquid silicone rubber from the ELASTOSIL® 3671 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time and good mechanical and electrical properties. The vulcanizates of this product are known for their self-adhesive properties to various substrates as well as their low coefficient of friction.

ELASTOSIL® LR 3065/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3065 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. In comparison with ELASTOSIL® LR 3003 grades, the coefficient of friction is reduced by 50-70%. The vulcanizates are noted for their excellent mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® Color Paste FL Yellow RAL 1021 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

BELSIL® DM 12500 is a linear, non-reactive, unmodified polydimethylsiloxane. It is a dimethicone with a viscosity of 12500 mm²/s. It is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gasses such as water vapor and oxygen, allowing the skin to respire.

ELASTOSIL® AUX FL Non-Healing is a ready-to-use masterbatch comprising specific additives and reactive silicone polymers that are commonly used in ELASTOSIL® liquid silicone rubber. This ensures homogeneous covulcanization without migration, as may be observed for systems based on silicone oil. It can be used to reduce self-healing and other sticking phenomena.

ELASTOSIL® 4710 is a 100% silicone, one-component, acid-curing silicone sealant for sealing joints in food and drinking water contact applications. This versatile product cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

ELASTOSIL® RT 402 is a pourable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature. It is characterized by its antistatic properties, condensation-curing mechanism, and flowability. This silicone rubber is commonly used in applications such as elastomers for pad printing, where its unique properties are beneficial.

ELASTOSIL® RD 3151 F is a silicone rubber dispersion used for textile coatings and as a primer for bonding silicone rubber on PEX surfaces. It finds application in industrial textiles. The dispersion offers properties such as high abrasion resistance, easy-to-clean surfaces, and high heat resistance.

Wacker Chemie 3-Chlorobutanone (3-Cl-MEK) is a chlorinated intermediate. It is a colorless to brownish, mobile liquid with a pungent odor. This compound serves as a building block for various heterocycles and is used in the synthesis of pharmaceuticals like sulfamoxole, sulfisoxazole, and sulfoguanole. Additionally, it finds application in the synthesis of pesticides.

WACKER® 50550/8 VP is a waxy, alkyl-modified polysiloxane known for its hydrolysis resistance and strong affinity to different substrates. Primarily utilized in the polish sector, this product is particularly recommended for car polishes and paint conditioners. Its high substantivity ensures that the treated paint surface remains highly resistant to detergents and weathering over extended periods of time, providing long-lasting protection.

ELASTOSIL® Color Paste PT Black RAL 9011 F is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used to produce ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration, as may be observed for systems based on silicone oil.

ELASTOSIL® AUX G 3243 is a solvent-based mixture of siloxanes and reactive silanes used as adhesion promoters for silicone rubbers. It is used to pretreat metallic, ceramic, glass, or other polymeric substrate surfaces to enable excellent adhesion towards subsequently vulcanized ELASTOSIL® R solid silicone elastomers (HCR/HTV, peroxide curing).

ELASTOSIL® Color Paste FL Light Blue RAL 5015 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® R Plus 4050/55 MH 9005 is an addition-cure, one-component high consistency silicone rubber specifically designed for the manufacture of molded articles. The vulcanizates of this silicone rubber exhibit excellent heat stability. ELASTOSIL® R Plus 4050/55 MH 9005 is suitable for various household applications.

WACKER® L 066 is a 100% polysiloxane polyethylene glycol copolymer. WACKER® L 066 exhibits unique high surface activity, which allows it to wet and spread effectively on nearly any surface. WACKER® L 066 is primarily used for lowering the surface tension of aqueous and non-aqueous solutions, as a highly effective wetting agent, and for the hydrophilic treatment of numerous materials and surfaces.

ELASTOSIL® RT 563 is a pourable, room-temperature-vulcanizing, condensation-curing, two-component silicone rubber. It exhibits excellent flow and high hardness. This product is specifically designed for encapsulating electronic components. To initiate the curing process, Catalyst T37 can be added for longer pot lives and curing times, or Catalyst T40 for shorter pot lives and curing times.

BELSIL® DM 1000000 is a linear, non-reactive, unmodified polydimethylsiloxane. It is a dimethicone with a high viscosity of 1000000 mm²/s. It exhibits low surface tension and a high spreading coefficient. Its flexible polymer backbone grants it high permeability to gasses such as water vapor and oxygen. This permeability enables the skin to respire.

ELASTOSIL® R 573/50 A/B is a two-component, electrically conductive HCR silicone rubber for the manufacture of electrically conductive products. This product is an addition-cured electrically conductive HCR silicone rubber that shows a low volume resistivity. This product can be used within a temperature range of -55 °C to +210 °C.

ELASTOSIL® LR 3842/60 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

BELSIL® SPG 128 VP is available as a 20% active solution in cyclopentasiloxane. The solution includes a silicone polyglucoside, which is a nonionic surfactant with an HLB (hydrophilic-lipophilic balance) value of approximately 6-7. This silicone polymer is produced using a renewable, sugar-based component. Silicone polyglucosides are recognized for their mild and gentle properties as surface-active silicone surfactants. However, they are not typically used as primary surfactants since they do not generate significant foam independently.

DEHESIVE® 915 is a solvent-free, addition-curing silicone fluid specifically developed to provide paper and filmic substrates with a release layer. Formulated with additional components, this versatile product offers exceptionally fast curing properties, enabling the use of formulations with low platinum concentrations.

ELASTOSIL® 5000 is a one-component, acid-curing, low-modulus silicone sealant with outstanding adhesion, a long shelf life, and very good processing properties for construction and industrial applications. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.