Products

HDK® V15A is a standard synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity commonly used in various industrial applications. HDK® V15A finds its application as a thickening and thixotropic agent in silicone sealants. It offers higher thickening efficiency compared to HDK® V15.

ELASTOSIL® Color Paste FL Red RAL 3020 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

SEMICOSIL® 988/1K Grey is a non-slump, thermally curable, one-part silicone rubber. It is a ready-to-use system that exhibits low viscosity during dispensing, making it easy to work with. This product serves as a low-thermal-stress sealing adhesive with a medium hardness. It offers high flexibility and demonstrates excellent primerless adhesion to a wide range of substrates.

SEMICOSIL® 911 A/B is a pourable, two-part silicone rubber that cures to a soft silicone gel through addition-curing. It has a 1:1 mixing ratio and demonstrates thixotropic behavior. This product offers rapid heat curing and forms a soft gel during vulcanization. SEMICOSIL® 911 A/B has a low volatile and uncured polymer content. It maintains almost constant properties within a wide temperature range, from -40 °C to +180 °C. Additionally, it boasts a low ion content.

WACKER® Finish CT 51 L is a solvent-based silicone rubber solution specifically designed for fine coatings on textile substrates. It enables the application of fine coatings with a weight as low as < 5 g/m². This product offers high water columns and low air permeability, resulting in excellent performance. Additionally, it exhibits exceptional layer-to-layer adhesion when multiple coating layers are applied.

ELASTOSIL® LR 3005/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® R Plus 4303/70 is a two-component high-consistency silicone rubber specifically formulated for the production of extruded articles, particularly those intended for contact with potable water. The cured articles exhibit excellent transparency and showcase good to very good mechanical properties. This silicone rubber cures rapidly through addition cure, resulting in a significantly faster vulcanization reaction compared to peroxide-based materials.

ELASTOSIL® RT 713 is a non-slump, addition-crosslinking, thermal-curing, one-component silicone rubber. It is a ready-to-use, one-part system that offers rapid heat cure. With its low density and low hardness, it provides high compressibility. It is also known for its primerless adhesion to many substrates, making it suitable for general-purpose sealant applications, as well as FIPG and CIPG applications.

SILRES® BS 1702 is a solvent-free mixture of silane and siloxane that can be applied either in undiluted form or diluted with organic solvents. It is specifically designed as a high-quality specialty water repellent for impregnating fiber cement. When applied to fiber cement, SILRES® BS 1702 acts as an effective water repellent, helping to protect the material from moisture absorption and potential damage caused by water.

ELASTOSIL® N10 Transparent is a solvent-free, neutral-cure, low-viscous, and non-thixotropic silicone sealant that cures at room temperature under the influence of atmospheric moisture. It exhibits excellent primerless adhesion to many substrates. It is a multipurpose grade for bonding, sealing, and potting, e.g. in electronic applications.

SILPURAN® 6760/50 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Vulcanizates are noted for their self-adhesive properties to various substrates combined with a low coefficient of friction. SILPURAN® 6760/50 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

DEHESIVE® EM 427 is the base polymer in a three-component aqueous emulsion system. It is combined with WACKER® CROSSLINKER V 15 and WACKER® CATALYST EM 459. This product is specifically developed for pressure-sensitive adhesive release applications and can be utilized on papers with different levels of porosity as well as films. Cure is achieved through a vinyl addition chemistry mechanism.

WACKER® AK 100 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 100,000 mm²/s. It is formulated with a special heat stabilizer that safeguards the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 100 000 STAB is particularly well-suited for applications involving high temperatures and/or shear stress. It is a non-polar liquid with a low solidification point and exhibits good dielectric properties.

ELASTOSIL® LR 3043/40 A/B A/B is a liquid silicone rubber of the ELASTOSIL® LR 3043 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

VINNAPAS® 315 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol. It possesses a glass transition temperature (Tg) of +17 °C, which contributes to its exceptional heat resistance and high tensile strength. Specifically formulated as a base for high-speed packaging adhesives, VINNAPAS® 315 demonstrates remarkable wet tack and thickening responses. Its poly(vinyl alcohol) stabilization and impressive mechanical stability ensure smooth machining and enable its utilization in various roll, extruder, or spray applications.

WACKER® Adhesion Promoter HF 86 is a solvent-free adhesion promoter specifically designed for enhancing the adhesion of addition-cured liquid silicone rubbers to textiles. It provides improved bonding between silicone rubbers and textiles, making it ideal for textile coatings. Additionally, it can be used as a textile primer in aqueous solutions. Notably, WACKER® Adhesion Promoter HF 86 is completely solvent-free.

WACKER® Catalyst T 79 is the designated curing agent for ELASTOSIL® RT 779 silicone rubber from WACKER. This shear-thinning paste offers outstanding adhesion properties and enhances the oil resistance of ELASTOSIL® RT 779. The curing speed can be adjusted by altering the mixing ratio. Additionally, it provides excellent adhesion to a wide range of substrates, such as glass, ceramics, wood, metals, plastics, and powder coatings.

ELASTOSIL® R Plus 4370/50 is a two-component high consistency silicone rubber designed for the manufacturing of extruded articles. It utilizes addition curing and possesses self-bonding properties. This product is well suited for the production of two-component combinations using pressure-free extrusion or co-extrusion techniques.

ELASTOSIL N199 TRANSPARENT is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. ELASTOSIL® N199 Transparent exhibits excellent primerless adhesion to many substrates with high tear strength. It is a multipurpose adhesive and sealant for the electronics industry, with typical uses for CIPG- and FIPG-applications.

HDK® H21 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H21 is used as a thickening and thixotropic agent in various applications such as composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

VINNAPAS® 561 ED is a low Tg polymer dispersion based on vinyl acetate and ethylene. It exhibits excellent elongation, flexibility, and water resistance, making it ideal for numerous construction applications. VINNAPAS® 561 ED exhibits high filler loading capabilities and is compatible with both fully and partially hydrolyzed polyvinyl alcohols, as well as other synthetic latex polymer dispersions (such as styrene/acrylic and pure acrylic dispersions).

SEMICOSIL® 988 TIC is a non-slump, thermally curable, one-part silicone rubber with excellent insulation properties. This product is optimized for insulation coating applications in disk power semiconductors. It is a ready-to-use system that exhibits thixotropic behavior, ensuring easy application and positioning. SEMICOSIL® 988 TIC is transparent, has a medium hardness, and offers high flexibility as a low-stress adhesive.

HDK® V16 is a synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a standard product widely used in various industrial applications. The product is a white colloidal powder of high purity. HDK® V16 is primarily employed as a thickening and thixotropic agent in silicone sealants. Notably, it exhibits higher thickening efficiency compared to HDK® V15A.

WACKER® Silane 25013 VP is a colorless, clear liquid with a weak odor. It is soluble in organic solvents and insoluble in water. Applications include filler treatments and plastic additives. WACKER® Silane 25013 VP is soluble in common, non-polar organic solvents but insoluble in water. Upon reaction with water, WACKER® Silane 25013 VP will release a certain amount of methanol (VOC).

SILPURAN® 6000/05 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/05 A/B is designed for medical applications in compliance with Wacker Silicones' health care policy. Please note that this material has use restrictions according to Wacker Silicone's health care policy. In particular, contact with body tissue or blood is not permitted.

ELASTOSIL® Color Paste FL Orange RAL 2004 F is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® R 401/30 OH US is a colorless, translucent silicone rubber base noted for its flexibility, high transparency, and good mechanical properties. Its vulcanizing characteristics make it possible to achieve rubber moldings by compression, transfer, and injection molding. Post-cured vulcanizates can be used for applications in the health care and food handling industries.

SILFOAM® SE 36 is an antifoam emulsion that exhibits excellent compatibility with surfactants. Unlike conventional antifoam emulsions, SILFOAM® SE 36 maintains stability over extended periods. It is particularly effective in preventing cloudiness in surfactant-based solutions. We advise conducting preliminary trials, as these systems can vary significantly.

VINNAPAS® EP 8178 is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene (VAE) copolymer dispersion. It has a glass transition temperature (Tg) of approximately -3 °C. This dispersion is specifically designed as a high-performance, ultra-high-solids dispersion for weather-resistant air barriers. It offers excellent water resistance, ideal mechanical properties, and the capability to handle high extender loadings.

ELASTOSIL® LR 3003/80 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

SILRES® BS 310 is a solventless emulsion that can be thinned with water. It consists of polysiloxane modified with a functional silicone resin. This product is specifically designed to be added to aqueous masonry coatings and primers, either during or after their manufacture. When used undiluted, SILRES® BS 310 serves as an additive for aqueous indoor paints or coatings. Its purpose is to enhance the workability of the paint or coating, resulting in improved application properties. This product is highly compatible with indoor paints and has a positive influence on wetting and leveling properties.

ELASTOSIL® SOLAR 2203 is a pourable, addition-curing, RTV-2 silicone rubber used for potting, lamination, and encapsulation purposes. The product vulcanizes at room temperature to yield a very soft silicone gel. ELASTOSIL® SOLAR 2203 displays pronounced inherent tack and excellent long-term stability against weathering, moisture, and UV light. The soft silicone gel can continuously withstand changing climatic conditions, UV radiation, and temperatures up to 160°C (320°F) without damage.

ELASTOSIL® Color Paste FL Yellow RAL 1016 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

WACKER® AK 1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 1000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits low surface tension, resulting in high surface activity. Additionally, it is chemically highly unreactive and has a low solidifying point.

ELASTOSIL® SOLAR 2205 is a pourable addition-curing RTV-2 silicone rubber suitable for coating, lamination, and encapsulation purposes. The product cures at room temperature and under heat to yield a soft elastomer. Cured ELASTOSIL® SOLAR 2205 offers excellent long-term stability against weathering, moisture, and UV light. The soft silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures up to 160°C (320°F) without damage.

ELASTOSIL® LR 3043/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3043 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.