Products

HELISOL® 5A is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 5 mm²/s. Its unique chemical structure gives it exceptional properties that differentiate it from organic materials like mineral oils. HELISOL® 5A is a clear, odorless, and colorless liquid.

WACKER® AKC Silicone Fluids are linear, non-reactive silicone fluids that offer excellent heat and shear stability. This ensures protection against oxidative and radical decomposition, preventing viscosity changes and gel formation. As a result, WACKER AKC Fluids are ideal for applications that involve high thermal and/or shear stress.

HELISOL® 10A is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 10 mm²/s. Its unique chemical structure sets it apart from organic materials like mineral oils, giving it exceptional properties. HELISOL® 10A is a clear, odorless, and colorless liquid.

DEHESIVE® PSA 630 T is a solvent-based silicone pressure-sensitive adhesive intended particularly for coating films but also other substrates. It can be used for coating several film substrates, such as polyester, polyamide, polyimide, and other substrates, for the manufacture of different silicone pressure-sensitive adhesive tapes and other articles.

SEMICOSIL® 9981 TC is a one-part, thermally conductive paste with electrical conductivity that cures into a gap-filling silicone. The thermal paste efficiently fills the finest gaps of heat-generating and ablating substrates, minimizing contact resistance. The thermal resistance is minimized due to an exceptional thermal conductivity of 10 W/mK, in combination with the possibility of reducing bond line thickness to 10 μm.

ELASTOSIL® N189 Black is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. It exhibits excellent primerless adhesion to many substrates and has good resistance to mineral oil and coolants. Additionally, it shows excellent heat stability.

ELASTOSIL® RT 607 A/B is a pourable, addition-curing RTV-2 silicone rubber with a two-part formulation and a 9:1 mixing ratio. It has low viscosity and offers rapid heat cure. The cured rubber exhibits high hardness and excellent heat stability. Additionally, it is flame retardant, making it suitable for general purpose encapsulation. This product can also be used as a potting material for electrical coils of lifting magnets and for slot exit potting of electrical coils.

POWERSIL® Fluid TR 50 is a fully synthetic silicone fluid that is nonvolatile and noncorrosive. It possesses a high fire point and exhibits virtually self-extinguishing behavior, significantly reducing the fire hazard compared to conventional transformer fluids. This fluid demonstrates exceptional thermal stability, even in the presence of air, enabling higher thermal utilization when compared to other liquid coolants.

ELASTOSIL® RT 702 White is a non-slump, one-part heat-curing silicone adhesive. The cured material demonstrates very good adhesion to many substrates and long-term stability against weathering, moisture, and UV light. The cured silicone rubber can continuously withstand constantly changing climatic conditions, UV radiation, and temperatures as high as 210°C (410°F) without sustaining damage.

ELASTOSIL® E4 is a non-slump, acetoxy-cure, one-component silicone rubber that cures at room temperature under the influence of atmospheric moisture. It exhibits good heat stability, with permanent temperatures up to 180°C and peak temperatures up to 200°C. This product has excellent primerless adhesion to many substrates.

ELASTOSIL® E14 Red is a non-sag acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent primerless adhesion to many substrates and outstanding heat stability even in long-term exposure. It meets the physical requirements of MIL-A-46106, Group I, Type I, and Group III, Type I.

ELASTOSIL® E10 ROT is a one-component acetoxy-cure silicone rubber with low viscosity that cures at room temperature under the influence of atmospheric moisture. This product shows good primerless adhesion to many substrates and outstanding heat stability even in long-term exposure.

DEHESIVE® PSA 850 R is a solvent-based silicone pressure-sensitive adhesive intended for coating films but also other substrates. It can be used for coating several film  substrates, such as polyester, polyamide, polyimide, and others, for the manufacture of different silicone pressure-sensitive adhesive tapes and other articles.

HELISOL® XA is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 20 mm²/s. Its chemical structure gives it a remarkable set of properties that distinguish it from organic materials like mineral oils. This clear, odorless, and colorless liquid exhibits an outstanding property profile.

ELASTOSIL® RT 702 is a one-part heat-curing silicone adhesive that exhibits non-slump properties. Once cured, ELASTOSIL® RT 702 demonstrates excellent adhesion to a wide range of substrates, along with long-term stability against weathering, moisture, and UV light. The cured silicone rubber can withstand constant exposure to varying climatic conditions, UV radiation, and temperatures up to 250 °C (482 °F) without sustaining any damage.

ELASTOSIL® E70 is a flowable, one-component, acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent primerless adhesion to many substrates and outstanding heat stability even in long-term exposure. It is a high-temperature-resistant grade for sealing and bonding applications under high thermal stress.

ELASTOSIL® A234 White is a flowable RTV-1 silicone rubber that cures at room temperature under the influence of moisture. It shows excellent primerless adhesion to many substrates and offers outstanding heat stability. It is a multipurpose grade for high-temperature applications. Suitable for sealing and bonding, such as the bonding of steam chambers and sole plates of steam irons,

HELISOL® XLP is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 35 mm²/s. Its unique chemical structure gives HELISOL® XLP exceptional properties that distinguish it from organic materials like mineral oils. This clear, odorless, and colorless liquid exhibits an outstanding property profile.

WACKER® AK 300 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 300000 mm²/s. It is formulated with a special heat stabilizer that provides protection against thermal decomposition and viscosity changes. This unique feature makes WACKER® AK 300 000 STAB highly suitable for applications subjected to high temperatures and/or shear stress. The heat stabilizer ensures the stability and integrity of the silicone fluid, allowing it to maintain its desired properties under challenging conditions.

WACKER® AK 150 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 150,000 mm²/s. It is enriched with a special heat stabilizer that shields the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 150 000 STAB is especially well-suited for applications involving high temperatures and/or shear stress. It is a non-polar liquid with a low solidification point and exhibits good dielectric properties.

WACKER® AK 1 000 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 1,000,000 mm²/s. It is formulated with a special heat stabilizer that protects the silicone fluid from thermal decomposition and viscosity changes. As a result, WACKER® AK 1 000 000 STAB is well-suited for applications involving high temperatures and/or shear stress. It has a low solidification point, good dielectric properties, a high flash point, and is chemically inert.

ELASTOSIL® RT 778 is a non-slump, condensation-curing RTV-2 silicone adhesive. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 778 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures up to 250°C (482°F) without damage.

ELASTOSIL® N288 is a low-viscosity, ready-to-use, neutral crosslinking silicone rubber. It cures at room temperature under the influence of atmospheric moisture. It exhibits excellent heat stability, excellent primerless adhesion to many substrates, permanent temperature exposure up to 200 °C, and peak temperatures up to 250°C.

SILRES® BS 5137 is a highly efficient aqueous and water-dilutable emulsion of reactive polydimethylsiloxane. It is used to provide water repellency to glass wool (fiberglass) or stone wool bound with phenolic resin. It can also be utilized for expanded minerals such as perlite, vermiculite, or expanded clay aggregates.

ELASTOSIL® RT 602 A/B is a pourable, addition-curing RTV-2 silicone rubber with a two-part formulation and a 9:1 mixing ratio. It has low viscosity and offers rapid heat cure. The cured rubber exhibits a medium hardness and excellent heat stability. This product is suitable as a general purpose encapsulant.

ELASTOSIL® A33 Ivory is a moisture-curing silicone rubber (RTV-1) that does not slump and cures at room temperature. It releases an organic amine during the vulcanization process. ELASTOSIL® A33 demonstrates excellent primerless adhesion to a wide range of substrates. This multipurpose grade is suitable for sealing and bonding applications, offering resistance to high temperatures and contact with oil.

WACKER® AK 600 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 600,000 mm²/s. It is specifically formulated with a special heat stabilizer to provide protection against thermal decomposition and viscosity changes. This makes WACKER® AK 600 000 STAB highly suitable for applications that experience high temperatures and/or shear stress.

WACKER® AK 200 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 200.000 mm²/s. It is enhanced with a special heat stabilizer that safeguards the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 200 000 STAB is particularly well-suited for applications that entail high temperatures and/or shear stress. It exhibits long-term heat stability, making it suitable for operating temperatures exceeding 150 °C, and it demonstrates high shear stability.

WACKER® AK 500 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 500,000 mm²/s. This product is formulated with a special heat stabilizer that provides protection against thermal decomposition and viscosity changes. As a result, WACKER® AK 500 000 STAB is highly suitable for applications involving high temperatures and/or shear stress. Its unique formulation ensures the stability and performance of the silicone fluid in demanding conditions.

ELASTOSIL® RT 675 A/B is a pourable, addition-curing RTV-2 silicone rubber with a two-part formulation and a 1:1 mixing ratio. It features a very high hardness (Shore A) and excellent heat stability. This silicone rubber is particularly known for its high thermal conductivity, making it ideal for the encapsulation of electronic components.

WACKER® AK 100 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 100,000 mm²/s. It is formulated with a special heat stabilizer that safeguards the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 100 000 STAB is particularly well-suited for applications involving high temperatures and/or shear stress. It is a non-polar liquid with a low solidification point and exhibits good dielectric properties.