Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Specific Features
- Heat resistant
- MIL-A 46106 grade
- Non-slump
Applications & Uses
- Applications
- Application Area
- Cure Method
- Applications
- Formed-In-Place-Gaskets (Wet Type)
- Heating, Ventilation, Air Conditioning (HVAC)
- Small Appliances
- Application Details
High temperature resistant grade for sealing and bonding.
Processing
ELASTOSIL® E14 Red shows good primerless adhesion to many substrates. We recommend running preliminary tests to optimize conditions for the particular application.
Properties
- Color
- Physical Form
- Typical Properties
- Cured Properties
- Uncured Properties
- Properties
- Excellent heat stability: long term 200°C, peak temperature up to 250°C
- Thixotropic paste
| Value | Units | Test Method / Conditions | |
| Minimum Service Temperature | -45 | °C | — |
| Value | Units | Test Method / Conditions | |
| Density (at 23°C) | 1.18 | g/cm³ | DIN EN ISO 1183-1 A |
| Elongation (at break) | 400 | % | ISO 37 Type 1 |
| Shore Hardness A | 32 | — | DIN ISO 48-4 |
| Tensile Strength | 2.5 | N/mm² | ISO 37 Type 1 |
| Value | Units | Test Method / Conditions | |
| Curing Time (at 23°C, 50 %r.h) | 12 | hour/mm | — |
| Density | 1.15 | g/cm³ | DIN EN ISO 1183-1 A |
| Skin Formating Time (at 23°C, 50% r.h) | 15 - 20 | minutes | — |
| Viscosity (at 23°C, Shear rate 0.5 s⁻¹) | 1000000 | — | ISO 3219 |
| Viscosity (at 23°C, Shear rate 25 s⁻¹) | 140000 | — | ISO 3219 |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Quality Standards
- Compliance
Meets the physial requirements of MIL-A-46106, Group I, Type I and Group III, Type I.
Safety & Health
- Safety Notes
During vulcanization of ELASTOSIL® E14 Red, a total of 3% by weight of acetic acid is split off. These vapors should not be inhaled for long periods or in high concentration. Work areas should therefore be well ventilated. Contact of unvulcanized silicone rubber with eyes and mucous membranes must be avoided as this would cause irritation. However if it does happen, rinse the affected area thoroughly.
Packaging & Availability
- Country Availability
- Regional Availability