Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Technologies
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Specific Features
- Flowable
- Heat resistant
- Low viscosity
- One-component
- Solvent-free
Applications & Uses
- Markets
- Cure Method
- Applications
Heating Elements
- Application Details
High temperature resistant grade for sealing, bonding and coating, use e.g. for sealing tubular heating elements.
Processing
ELASTOSIL® E10 ROT shows good primerless adhesion to many substrates. We recommend running preliminary tests to optimize conditions for the particular application.
Properties
- Cured Properties
- Uncured Properties
- Properties
- Recommended service temperature from -45 °C to +230 °C
- max. recommended short term peak temperature exposure 250°C
- non-thixotropic
| Value | Units | Test Method / Conditions | |
| Elongation (at break, Type 3, 23°C, 2mm) | 300 | % | ISO 37 |
| Shore Hardness A | 25 | — | DIN ISO 48-4 |
| Tensile Strength (Type 3, at 23°C, 2mm) | 2.5 | N/mm² | ISO 37 |
| Value | Units | Test Method / Conditions | |
| Curing Time (at 23°C, 50 %r.h) | 12 | hour/mm | — |
| Density (at 23°C) | 1.1 | g/cm³ | DIN EN ISO 1183-1 A |
| Skin Formating Time (at 23°C, 50% r.h) | 10 - 15 | minutes | — |
| Viscosity (at 25°C, Shear rate 0.5 s⁻¹) | 9000 | — | ISO 3219 |
| Viscosity (at 25°C, Shear rate 25 s⁻¹) | 6500 | — | ISO 3219 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability