company tower banner
Wacker Chemie AG Company Logo

ELASTOSIL® A33 Ivory

1 of 230 products in this brand
ELASTOSIL® A33 Ivory is a moisture-curing silicone rubber (RTV-1) that does not slump and cures at room temperature. It releases an organic amine during the vulcanization process. ELASTOSIL® A33 demonstrates excellent primerless adhesion to a wide range of substrates. This multipurpose grade is suitable for sealing and bonding applications, offering resistance to high temperatures and contact with oil.

Product Type: 1K (1 component) Sealant

Application Area: White Goods

Cure Method: Air Dry, Chemical Cure, Moisture Cure

Chemical Family: Silicones

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Chemical Family

Features & Benefits

Specific Features
  • Non-slump
  • Oil resistant
  • One-component

Applications & Uses

Application Area
Applications

Small Appliances

Application Details

Multipurpose grade for sealing and bonding, suitable for high temperatures and oil contact.

Processing

ELASTOSIL® A33 shows good primerless adhesion to many substrates. We recommend running preliminary tests to optimize conditions for the particular application.

Properties

Cured Properties
ValueUnitsTest Method / Conditions
Density (at 23°C)1.17g/cm³DIN EN ISO 1183-1 A
Elongation (at break)300%ISO 37 Type 1
Shore Hardness A28DIN ISO 48-4
Tensile Strength2.5N/mm²ISO 37 Type 1
Uncured Properties
ValueUnitsTest Method / Conditions
Curing Time (at 23°C, 50 %r.h)1.5 - 2 mm/day
Density1.14g/cm³DIN EN ISO 1183-1 A
Dynamic Viscosity (at 25°C, Shear rate 0.5 s⁻¹)1000000mPa·sDIN EN ISO 3219
Dynamic Viscosity (at 25°C, Shear rate 25 s⁻¹)250000mPa·sDIN EN ISO 3219
Skin Formating Time (at 23°C, 50% r.h)10 - 30 minutes
Properties
  • Amine-curing system
  • No use of organotin catalysts
  • Good heat stability
  • Excellent primerless adhesion to many substrates
  • Recommended service temperature from -45°C to +200°C
  • max. recommended short term peak temperature exposure 220°C
Note

Curing conditions: 2 mm, 14 days storage at 23°C and 50% RH.

Regulatory & Compliance

Certifications & Compliance

Safety & Health

Safety Notes

During vulcanization of ELASTOSIL® A33 IVORY, an organic amine is split off. These vapors should not be inhaled for long periods or in high concentration. Work areas should therefore be well ventilated. Contact of unvulcanized silicone rubber with eyes and mucous membranes must be avoided as this would cause irritation. However if it does happen, rinse the affected area thoroughly with water.

Packaging & Availability

Country Availability
Regional Availability
  • Africa
  • Asia
  • Europe
  • Latin America
  • Middle East
  • North America
  • Oceania