Products in Parts & Components

SEMICOSIL® 988/1K Grey is a non-slump, thermally curable, one-part silicone rubber. It is a ready-to-use system that exhibits low viscosity during dispensing, making it easy to work with. This product serves as a low-thermal-stress sealing adhesive with a medium hardness. It offers high flexibility and demonstrates excellent primerless adhesion to a wide range of substrates.

WACKER SilGel® 613 is a pourable, addition-curing, RTV-2 silicone rubber that undergoes vulcanization at room temperature, resulting in a highly flexible silicone gel. This product offers inherent tack and possesses excellent mechanical damping properties. Furthermore, when used in conjunction with ELASTOSIL® CAT UV, WACKER SilGel® 613 exhibits rapid UV curing at room temperature while maintaining a long pot life.

HDK® H18 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H18 is used as a thickening and thixotropic agent in composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

Evonik Polymer VS 200 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

Evonik Polymer VS 1000 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

VESTAMID® LX9013 BK 9.7507 is a plasticized polyamide 12 compound with exceptionally high long-term resistance under thermal load. It has low moisture absorption, resulting in minimal dimensional and property changes under changing ambient conditions. Extruded tubes made from VESTAMID® LX9013 BK 9.7507 are impact-resistant, even at low temperatures. This material is suitable for producing flexible tubes that are consistently exposed to higher temperatures, such as in the engine compartment of motor vehicles.

VESTAMID® LX9112 BK is a heat-stabilized, conductive polyamide 12 compound specifically developed for the pore-free extrusion coating of steel tubing. It stands out from commonly used conductive extrusion compounds due to its significantly lower melt viscosity and outstanding extrusion characteristics, even in very thin coatings.

VESTAKEEP® 5000 G is a high-viscosity, unreinforced polyether ether ketone suitable for injection molding and extrusion. It is a semi-crystalline polymer with superior thermal and chemical resistance. Parts made from VESTAKEEP® 5000 G have low flammability and can be processed using standard machines for thermoplastics.

VESTAMID® X7393 BK 9.7507 is a high-viscosity, plasticized, impact-modified, heat- and light-stabilized polyamide 12 compound for flexible tubing and hoses in the automobile industry. Parts made from VESTAMID® X7393 BK 9.7507 exhibit optimized cold temperature impact resistance, increased burst pressure resistance, a low coefficient of friction, and good chemical resistance.

DABCO® 33 LV is the industry standard tertiary amine catalyst used to promote the gel (polyol-isocyanate) reaction in the production of flexible and rigid foam, as well as CASE applications. It provides strong gel catalysis with high efficiency and serves as a versatile amine catalyst for various foam types.

Evonik VQM 909 formulations consist of vinylfunctional QM resin and vinylfunctional silicone polymers. These formulas are used to produce materials that are transparent, free of fillers, and have great mechanical qualities. They can also improve the mechanical properties and flow behavior of systems that are filled.

VESTAMID® X7293 is a plasticized polyamide 12 compound with a heat and light stabilizer for the extrusion of flexible tubing and hoses, especially for automotive applications. It is known for its easy processing and high impact strength at low temperatures.

Evonik Polymer VS 10000 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

DABCO® T 12 (dibutyltin dilaurate, DBTDL) is a catalyst that enhances the urethane (polyol-isocyanate) reaction in the manufacturing of flexible and rigid polyurethane foams, coatings, adhesives, and sealants. It promotes rapid gel and tack-free times, contributing to improved mechanical properties in molded and slabstock foams.

Evonik Polymer OH 2 is a polydimethyl siloxane with terminal silanol groups, serving as a fundamental component in the formulation of condensation-curing silicone elastomers. This product is offered in a range of viscosity levels, spanning from 100 to 400,000 mPas. In its physical form, it appears clear and colorless. Chemically, it is characterized as hydroxy-terminated polydimethyl siloxanes.

DABCO® DMDEE is an amine blow catalyst specifically designed for single and/or multicomponent polyurethane systems. It is a low-activity catalyst that demonstrates high blow selectivity. This catalyst allows for excellent shelf life in OCF applications and offers good system stability when used with HFO blow agents.

DABCO® Crystalline is a high-purity triethylenediamine (TEDA), serving as a powerful catalyst for urethane (polyol-isocyanate) reactions. It finds application in a variety of polyurethane applications. DABCO® Crystalline is used in all types of polyurethane foams, including flexible slabstock, flexible molded, rigid, semi-flexible, and elastomeric. Additionally, it is utilized in polyurethane coating applications. The main function of DABCO® Crystalline is to accelerate the reactions between isocyanate and water, as well as between isocyanate and organic hydroxyl groups.

VESTAMID® L1833 BK 9.7623 is a 23% glass fiber-reinforced, easily demoldable, and heat-stabilized polyamide 12 compound. This compound is specifically formulated to provide efficient production of injection molded parts with short cycle times, thanks to its excellent mold release properties. VESTAMID® L1833 BK 9.7623 is supplied as cylindrical granules, conveniently packaged in moisture-proof bags, ensuring optimal storage conditions. Experience the reliability and performance of VESTAMID® L1833 BK 9.7623 in your injection molding applications. This compound, with its glass fiber reinforcement, offers enhanced strength and rigidity, while its demolding characteristics and heat stability contribute to efficient production. Choose VESTAMID® L1833 BK 9.7623 for its exceptional properties, ease of processing, and suitability for a wide range of injection molded parts.

VESTAMID® LX9001 BK 9.7504 is a heat-stabilized and light-resistant PA 12 compound specifically developed for the extrusion coating of steel tubes. This compound enhances the corrosion resistance of steel tubes through its exceptional impact strength, abrasion resistance, and chemical resistance. The excellent adhesion between the steel and the properly applied VESTAMID® LX9001 BK 9.7504 further contributes to this increased corrosion resistance. Additionally, VESTAMID® LX9001 BK 9.7504 offers the advantages of low water absorption, good dimensional stability, and consistent properties even in changing ambient humidity. Supplied as cylindrical pellets in moisture-proof packaging, they are ready for seamless processing. Experience the exceptional qualities of VESTAMID® LX9001 BK 9.7504 and enhance the performance and durability of steel tubes with its reliable coating solution.

KOSMOS® T 100 is a dimethyl tin-based catalyst used in the production of polyurethane foams, coatings, sealants, elastomers, RIM, and spray applications. It is a liquid organic tin compound known for its exceptional catalytic activity. KOSMOS® T 100 exhibits high selectivity towards the urethane reaction, resulting in shorter gel times and tack-free times.

TEGO® Surten 202 E is a non-ionic polyether siloxane with a 100% active content. This product is particularly effective for surface wetting in adhesive applications, especially on challenging substrates. It is also well-suited for curtain coating applications. One of its key advantages is that it is a solvent-free, easy-to-handle liquid.

TEGOSIL® Heatban 200 is a heat stabilizer for cured silicone elastomers, especially high-consistency rubber (HCR). Like TEGOSIL® Heatban 110, this product offers protection against thermal degradation up to 300°C. It is compatible with various peroxide- and platinum-cured rubber materials commonly used in industrial and consumer applications. Its pasty viscosity simplifies incorporation into HCR formulations.

DYNOL® 604 is a high-performance, non-ionic organic superwetter known for its excellent equilibrium and dynamic surface tension reduction, a hallmark of the Dynol brand. It exhibits lower foam and dynamic surface tension values compared to the more hydrophilic DYNOL® 607 surfactant. Moreover, comparative wetting performance tests have demonstrated that DYNOL® 604 Surfactant serves as an excellent alternative to conventional fluorosurfactants and offers a cost-effective solution in place of new fluorosurfactant technology.

TEGO® Surten W 111 is a non-ionic organic surfactant known for its wetting properties. It operates as a non-foaming surfactant with low foaming characteristics. This product is valued for being solvent-free and silicone-free. It finds application in various contexts, offering high efficiency, an appealing cost-to-performance ratio, superior compatibility, and the advantage of causing no negative side effects.

VESTAKEEP® 4000 GF30 is a glass fiber-reinforced (30%) polyether ether ketone specifically designed for injection molding applications. This semi-crystalline polymer offers superior mechanical, thermal, and chemical resistance, ensuring exceptional performance. Parts manufactured from VESTAKEEP® 4000 GF30 exhibit low flammability, enhancing safety. Compatible with common injection molding machines for thermoplastics, this material simplifies the manufacturing process. Experience the reliability and versatility of VESTAKEEP® 4000 GF30 in your injection molding applications. With its glass fiber reinforcement, it provides enhanced strength and rigidity, while maintaining excellent properties in challenging environments. Choose VESTAKEEP® 4000 GF30 for its superior mechanical performance, thermal stability, chemical resistance, and ease of processing, enabling the production of high-quality injection molded parts.

VESTAMID® L1723 BK 9.7624 is a low-viscosity, plasticized PA12 resin suitable for injection molding. It has been developed specifically for the production of strip clips and cable ties. The parts made from this resin maintain their dimensions in environments with varying humidity levels while possessing high tenacity, a low coefficient of friction, and good chemical resistance.

POLYCAT® SA 2 LE is a low-emissive, delayed-action tertiary amine based on DBU. It effectively enhances the urethane reaction when heat is applied, making it suitable for microcellular, integral skin, coating, adhesive, sealant, and elastomer applications. This product is especially recommended for use with low-activity aliphatic isocyanates.

VESTAMID® MLT 7840 is an innovative 'low extractable' 5-layer tube designed for automotive fuel handling systems. It features high thermal stability, resistance to oil and fuels, and excellent barrier properties. It is resistant to fuel and finds applications in the automotive and mobility sectors.

VESTAMID® MLT 4800 is an innovative 'low extractable' 5-layer tube designed for automotive fuel handling systems. It consists of an outer layer of VESTAMID® polyamide 12, a barrier layer of ethylene vinyl alcohol (EVOH), and an inner layer of VESTAMID® polyamide 612. VESTAMID® MLT 4800 offers excellent barrier properties against ethanol-containing fuels and has very low extractables. It exhibits excellent cold impact properties, like all Evonik multilayer systems.

VESTAMID® NRG 1001 is a high-viscosity, plasticized, and impact-modified PA 12 compound with heat and light stabilizers for the extrusion of flexible tubing and hoses, particularly for oil and petrochemical applications. It offers easy processing and good dimensional control during pipe extrusion, especially for large pipe diameters.

VESTAMID® MLT 8EV is a proven 3-layer system designed for thermal management systems in the automotive industry. It is particularly suited for battery electric vehicles (BEVs), where thermal management of the battery, E-motor, or power electronics is crucial. The VESTAMID® MLT 8EV offers a cost-effective composition for cooling line applications, meeting the specific requirements of BEVs.

VESTAKEEP® 5000 CF30 is a Polyether Ether Ketone compound with a filler content of 30% carbon fibers and an ultra-high viscosity. It is primarily used for injection molding parts and is produced through a multistage process using hydroquinone and 4,4'-difluorobenzophenone building blocks.

VESTAMID® NRG 2901 BK is a high-viscosity, heat-stabilized compound with exceptional mold release properties. It is nucleated to reduce cycle time and shrinkage of molded parts. It is commonly used for gas pipes and fittings, with a proven record of safe and reliable performance in demanding applications, including fuel lines in passenger cars, air brake tubing in trucks, and offshore applications.

VESTAMID® X7293 BK 9.7507 is a plasticized polyamide 12 compound formulated with heat and light stabilizers for the extrusion of flexible tubing and hoses, particularly suited for automotive applications. This compound conforms to standards such as DIN 73378 (PA 12-HIPHL, Type 1), ISO/DIN 7628-1 (PA 12-HIPEHL, Type 1), and SAE J844. VESTAMID® X7293 BK 9.7507 offers easy processing and high impact strength at low temperatures. Its low moisture absorption ensures minimal variation in properties with changing humidity. Manufactured from this semicrystalline material, parts exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. Supplied as cylindrical granules in moisture-proof bags, VESTAMID® X7293 BK 9.7507 is conveniently ready for use. Choose VESTAMID® X7293 BK 9.7507 for its reliability and superior performance in extrusion applications, ensuring excellent results for your automotive tubing and hose needs.

VESTAMID® X7393 NC is a high-viscosity, plasticized, impact-modified, heat- and light-stabilized polyamide 12 compound used for flexible tubing and hoses in the automobile industry. Parts made from VESTAMID® X7393 NC exhibit optimized cold temperature impact resistance and increased burst pressure resistance in the extrusion of semi-rigid tubing. Additionally, it offers an exceptional low coefficient of friction and good chemical resistance.

POLYCAT® SA 8 is a tertiary amine utilized to enhance the urethane reaction either through heat activation or when combined with co-catalysts at ambient temperature. This product finds application in coatings, adhesives, sealants, elastomers, and composites. By using formulations containing POLYCAT® SA 8, it is possible to achieve an extended pot life comparable to that of mercury catalysts.