Products in Power Transmission & Distribution

Plenco® 07021 is impact grade phenolic molding compound. Customers have found this material useful for switchgear parts, or where mechanical assembly requires better impact strength. Plenco® 07021 is UL recognized under component file E40654. 07021 is available in black.

EverGlide® MB150H is a Polypropylene homopolymer polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1840 is a Polyoxymethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

THERMODAN® HF TP837BU has been developed specially to offer good processability, very fast extrusion process with very low die drool.

EverGlide® MB3950 is a Ethylene-vinyl acetate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Plenco® 07507 is an organic reinforced resole phenolic molding compound offering improved dimensional stability under humid conditions. 07507 offers excellent resistance to degradation from detergent solutions at elevated temperature. UL recognized under component file E40654. 07507 is available in black.

THERMODAN® HF TP832BUT has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

THERMODAN® HF TP870 has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

THERMODAN® HF TP521BU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.

EverGlide® MB1150 is a acrylonitrile-butadlene-styrene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Chemitac 8 is a thermoreactive adhesive for bonding peroxide-cured silicone elastomers to rigid substrates. Chemitac 8 is a heavy metal free product.

THERMODAN® HF TP543C2 has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C2 have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

Plenco® 07202 is an organic fiber reinforced phenolic molding compound, formulated to offer improved mechanical strength properties with an industrial finish. UL recognized under component file E40654. 07202 is available in black.

Plenco® 07552 is a glass fiber reinforced novolac phenolic molding compound, exhibiting superior dimensional stability, good impact strength, and good electrical properties. Type ASTM 5948 MFH. UL recognized under component file E40654. 07552 is available in black.

Plenco® 07500 is an organic reinforced phenolic molding compound, offering improved mechanical strength and excellent cosmetic characteristics. UL recognized under component file E40654. 07500 is available in black, brown, or red color. 07500 was qualified under military specification MIL-M-14 (superseded by ASTM D5948) TYPE CFG and batches can, if requested and paid for, be tested for certification to the standard.

THERMODAN® HF TP832NU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

Plenco® 07100 is an organic fiber reinforced phenolic molding compound, with improved mechanical strength properties and an industrial finish. 07100 is densified for easy handling and good pourability. UL recognized under component file E40654. 07100 is available in black.

Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.

THERMODAN® HF TP521NU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.

EverGlide® MB150 is a Polypropylene Homopolymer (PPH) which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EC-1850FT is a pourable filled epoxy resin system offering excellent heat transfer, high voltage insulation, low exotherm and minimum shrinkage. It is a lower viscosity version of EC-1850FT. It rapidly transfers heat, eliminates hot spot, and increases the operating efficiency of most encapsulated devices. Its low shrinkage minimizes risk of damage to fragile components.

EverGlide® MB3450 is a Styrene Acrylonitrile polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

THERMODAN® HF TP870B has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

THERMODAN® HF TP851 has been developed specially to comply with the requirements of cable specifications BS 7629, BS 6387 CWZ, BS EN 50200, BS 8434-2 & BS 5839-1 Clause 26.2 PH120 Enhanced. TP851 complies with LTS3 in BS 7655.

THERMODAN® HF TP832NUT has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

THERMODAN® HF TP812 has been developed specially to offer good processability, fast extrusion process with very low die drool. TP812 is capable of meeting the flame retardant requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions. It is also recognized as halogen free under UL 2885. It can be extruded using PVC extruders and screws. It possesses excellent tensile and flame retardant properties and meets the requirements of limited toxic and corrosive fume emission

SIVIC® 3470 is medium acryonitrile based multipurpose grade polymer with improved physical properties and good extrudability for automotive (air-ducts), hoses, etc.

KRALASTIC KU-600 R-1 is a high heat resistance ABS resin heat resistant grade.

Delene 5590 is a Halogen free flame retardant TPE for Wire & Cable applications, with excellent elasticity.

KRALASTIC GA-704 is high flow ABS resin standard grade.

STARCOM S/1000 is a PVC grade product.

STARCOM E/5000 is a PVC grade product.

Lamitex® XX PF CP 23 paper/phenolic laminated sheet and tubes offer high dielectric and very good mechanical strengths. Grade XX laminate and tubing are frequently specified for use in transformers, switchboards, mounting blocks, insulating panels, washers and spacers, and switchgear applications.

KRALASTIC K-2938FSR-1 is a heat resistance and high flow ABS resin heat resistant grade.

NDIA is a commercial grade black neoprene sheet with nylon reinforcement and has chloroprene reinforced with 14.5 0z./sq. yd.nylon fabric

EVATHENE® UE3312 is an ethylene-vinyl acetate copolymer resin (EVA) for use in foam injection and compression molding machine.