Products in Industrial: Heat Resistance

WACKER® AK 1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 1000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits low surface tension, resulting in high surface activity. Additionally, it is chemically highly unreactive and has a low solidifying point.

ELASTOSIL® LR 3001/55 FR A/B is a paste-like, low-inflammable, two-component compound of liquid silicone rubber. The excellent flame retardancy is confirmed by the achieved UL94-V0 listings at 0.75 mm and 3 mm thickness and f1 rating according to UL746C: Unterwriters Laboratories File E75704 (Wacker Chemie AG). It exhibits good heat resistance, high oil resistance, and short curing times, which are further benefits of this material.

WACKER® AK 500 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 500 mm²/s. Its chemical structure imparts exceptional properties that distinguish it from organic materials like mineral oils. WACKER® AK 500 exhibits excellent dielectric properties, low surface tension resulting in high surface activity, and a high degree of chemical inertness. These characteristics make it well-suited for various applications where these specific properties are required.

ELASTOSIL® LR 3170/40 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3170 series. It is a paste-like, low-inflammable, two-component compound with an extremely short curing time. The vulcanizates of this product are noted for their excellent mechanical and electrical properties.

WACKER® AK 100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 100 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It has a high flash point, demonstrating its resistance to ignition. It also exhibits high heat resistance and good solubility in a wide range of solvents.

WACKER® AK 12500 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 12500 mm²/s. Its chemical structure gives it exceptional properties that distinguish it from organic materials like mineral oils. It exhibits minimal changes in physical properties over a broad temperature range, excellent water-repellent properties, and good dielectric properties.

WACKER® AK 100000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 100000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits excellent water-repellent properties, good dielectric properties, and low surface tension, resulting in high surface activity.

ELASTOSIL® RT 480 is a spreadable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature. It is commonly used in industrial assembly and reproduction molding applications. This silicone rubber exhibits condensation-curing properties, allowing for fast curing at room temperature. It has a spreadable and self-leveling flow, making it easy to work with. ELASTOSIL® RT 480 is a two-component product that provides reliable results in various applications.

ELASTOSIL® LR 3092/65 A/B is a paste-like, two-component liquid silicone rubber with short curing times. The vulcanizates are noted for good mechanical properties and excellent heat resistance within a temperature range of -55°C to +210°C, and for a short time up to 300°C. Low compression sets can be achieved after post-curing.

WACKER® AK 10000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 10000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It possesses good dielectric properties, low surface tension resulting in high surface activity, and it is chemically highly unreactive.

ELASTOSIL® LR 3093/65 A/B is a paste-like, two-component compound of liquid silicone rubber with short curing times. The vulcanizates are noted for good mechanical properties and excellent heat resistance within a temperature range of -55°C to +225°C, and for a short time up to 300°C. Outstanding ultra-low compression sets can be achieved after post-curing for 4 hours at 210°C.

ELASTOSIL® LR 3011/50 FR A/B is a liquid silicone rubber. It is a paste-like, low-inflammable, two-component compound. The excellent flame retardancy is confirmed by UL94-V0 listings at 0.75 mm and 3 mm thickness. Good heat resistance, low compression set, short curing times, and non-abrasive behavior in the LIM process are further benefits of this material.

WACKER® AK 200 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 200 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits low surface tension, resulting in high surface activity. Additionally, it is chemically highly unreactive and has a low solidifying point.

WACKER® AK 2000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 2000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It possesses good dielectric properties, has low surface tension, resulting in high surface activity, and is chemically highly unreactive.

WACKER® AK 20000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 20000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits excellent water-repellent properties, good dielectric properties, and low surface tension, resulting in high surface activity.

ELASTOSIL® LR 3162 A/B is an electrically conductive liquid silicone rubber. It is a paste-like, two-component compound with short curing times. The vulcanizates are noted for good mechanical as well as electrical properties and for good heat resistance within a temperature range of -55°C to +210°C.

SABIC's Specialties Business ULTEM™ Resin 1000 is an unreinforced amorphous polyetherimide (PEI) resin that offers a high glass transition temperature (Tg) of 217°C. It features excellent mechanical, electrical, and dimensional properties at high temperatures. The material also offers very good chemical resistance for an amorphous material and is inherently flame retardant, offering UL94 V0 and 5V ratings and aerospace FAR 25.853 compliance. The material is RoHS-compliant, and the natural, uncolored material is halogen-free according to standards IEC 61249-2-21, IPC 4101E, and JEDEC JS709B. Compliance needs to be checked case by case for colored variants. The base material is transparent amber-colored but is also available in custom colors, both transparent and opaque. ISCC+-certified renewable bio-based solutions are available for this grade via differentiated color nomenclature. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business ULTEM 2300 resin is a standard flow 30% glass fiber reinforced polyetherimide resin.ULTEM 2300 resin is RoHS compliant and is intrinsically flame retardant without the use of FR modifiers and offers UL94 V0 and 5VA ratings and FAR25.853 performance.ULTEM 2300 resin may offer excellent dimension stability, strength, stiffness and creep resistance up to high temperature due to its high glass transition temperature of 217°C.ULTEM 2300 resin is opaque and can be custom colored.FeaturesAmorphousChemical ResistantDimensional StabilityFlame RetardantGeneral PurposeGood AdhesionGood FlowGood Mechanical PropertiesHeat ResistanceHigh Hydrolytic StabilityHigh StiffnessHigh StrengthLow CreepLow Smoke EmissionLow ToxicityVery Good Heat ResistanceWide Temperature Operating RangeApplicationsConsumer Appliances & ElectronicsAutomotive LightingAutomotive Electrical & Electronic SystemsAutomotive Interior, Exterior & BodyPowertrain & UTHGlazing & Window ElementsInterior FixturesArtificial TurfAutomotive ElectronicsDisplaysIndustrial AutomationFurnitureHousewaresLawn & GardenMedical Devices & AssembliesNon-Food Consumer PackagingConnectorsPrinted Circuit Boards (PCBs)Semiconductor ManufacturingSwitches & RelaysPower & UtilitiesRenewable EnergyConsumer Goods for Sports & RecreationTextile ManufacturingAerospace & AviationOff Road & Recreational Vehicle (RV)Rail & Mass TransitOptical Fiber & Telecom This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business Transparent Polyetherimide blend with PET resin. Material is RoHS compliant and is also US FDA and EU Food Contact Compliant in recognized colors. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Dynasylan® VTMO is a bifunctional organosilane, combines a reactive vinyl group and a hydrolyzable inorganic trimethoxysilyl group. Its versatile reactivity enables chemical bonding to both inorganic materials (e.g., glass, metals, fillers) and organic polymers (such as thermosets, thermoplastics, elastomers). Functioning as a crosslinking agent, adhesion promoter, and surface modifier, Dynasylan® VTMO offers diverse applications.

VESTAMID® DX9304 BK E70238 is an extrusion compound specifically developed for the manufacturing of tubing systems that require higher heat resistance. With a melting point approximately 35 °C higher than PA 11 and PA 12 compounds, VESTAMID® DX9304 BK E70238 allows for elevated temperatures during use. This compound is particularly well-suited for extruding tubing systems that are exposed to high burst pressures and high service temperatures, such as hydraulic clutch lines. Thanks to its low moisture absorption, the dimensions and properties of parts remain largely unaffected by ambient conditions. Choose VESTAMID® DX9304 BK E70238 for its exceptional heat resistance, reliability, and ability to meet the demanding requirements of tubing systems.

VESTODUR® 3030 is a high-viscosity polybutylene terephthalate (PBT) resin that is specially formulated for extrusion applications. It provides outstanding resistance to hydrolysis and heat. This compound is particularly suitable for the production of rigid, small-diameter tubing, including loose fiber optic buffer tubes. It is also compatible with film extrusion processes.

SABIC's Specialties Business LNP™ THERMOCOMP™ AM DC004XXA11is a compound based on High Heat PC copolymer resin containing 20% carbon fiber for Large Format Additive manufacturing (LFAM) applications, including mid-temperature autoclaving tooling. This compound can offer higher temperature performance than standard PC and avoid some of the processing challenges associated with high temperature materials.

Espolex® 3785A is a TPV known for its excellent colorability and appearance. It demonstrates strong adhesion to polypropylene compounds and polyethylene, processing like a thermoplastic while acting like a rubber.   Applications: Automotive interior (gaskets, grips, etc.) Automotive exterior Gaskets Mats Overmolding Bathroom accessories Boats Floor mats Jet-propelled vehicles Mud flaps Weatherstripping Injection molded parts   Features: High flowability Rubber-like elasticity and feel   Benefits: Recyclable

Espolex® 3675A is a TPV known for its excellent colorability and appearance. It exhibits strong adhesion to polypropylene compounds and polyethylene, while possessing thermoplastic processing characteristics and rubber-like properties.   Applications: Automotive interior (gaskets, grips, etc.) Automotive exterior trim Seat belt sleeves Gaskets Floor mats Overmolding Bathroom accessories Boats Jet-propelled vehicles Mud flaps Weatherstripping Injection molded parts   Features: High flowability Rubber-like elasticity and feel   Benefits: Recyclable

Duratron® U2300 PEI, a flame resistant Polyetherimide that offers exceptional rigidity, strength, dimensional stability, and heat resistance. With 30% glass-reinforcement, Duratron® U2300 PEI is the most durable and high-performance plastic offered in the Duratron® PEI line.Features:30% glass-reinforced for highest rigidity, strength, dimensional stability, and heat resistanceFlame resistantLowest Coefficient of Linear Thermal ExpansionSuperior strength-to-weight ratio and tensile strengthBenefits:Ideal for reusable medical devices, analytical instruments, electrical insulators and semiconductor process components, and structural components that require high strength and rigidity at elevated temperaturesCan withstand harsh conditions and high temperaturesSuitable for a wide range of applicationsApplications:Reusable medical devicesAnalytical instrumentsElectrical insulatorsSemiconductor process componentsStructural components that require high strength and rigidity at elevated temperaturesDuratron® U2300 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions and high temperatures. Whether you are looking to improve the performance of your reusable medical devices, analytical instruments, electrical insulators and semiconductor process components, or need a material that can withstand high temperatures and harsh environments, Duratron® U2300 PEI is the ideal solution. Try it today and experience the difference for yourself!

Ketron® LSG FG PEEK is a product available in the form of plates and rods and boasts a range of features including X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, heat resistance, steam sterilizability, heat sterilizability, plasma gas sterilizability, chemical resistance, ethylene oxide sterilizability, and biocompatibility. It is offered in both beige and black colors and is suitable for applications in equipment and parts, particularly connectors.

SHIKOH™ UV-3300B is UV curable urethane acrylate oligomer with excellent soft-elasticity, and very high elongation. It also shows good mechanical properties even at low temperature. EB and Thermal cure systems are also applicable. Features Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Good mechanical properties at low temperature Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Ketron® LSG PEEK is a product available in the form of plates and rods, offering exceptional heat and excellent sterilization resistance through methods like steam, dry heat, ethylene oxide, plasma, gamma, and x-ray. It comes in various colors, including beige, black, blue, red, green, and yellow. The material is characterized by features such as ethylene oxide sterilizability, biocompatibility, X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, heat resistance, steam sterilizability, heat sterilizability, plasma gas sterilizability, chemical resistance. Its main applications include equipment and parts, especially connectors.

Duratron® U1000 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional strength, dimensional stability, and flame and heat resistance. With the ability to perform continuously to 340°F / 170°C, Duratron® U1000 PEI is the ideal solution for applications that require consistent dielectric properties over a wide frequency range.Features:High strengthDimensional stabilitySuperior flame and heat resistancePerform continuously to 340°F / 170°CHydrolysis and chemical resistanceBenefits:Suitable for a variety of applications requiring high strength and rigidity at elevated temperaturesCan withstand repeated autoclaving cycles making it ideal for medical, pharmaceutical, and biotechnology marketsHydrolysis and chemical resistance make it suitable for electrical / electronic insulators and semiconductor process componentsApplications:Medical and pharmaceutical industryBiotechnology marketElectrical / electronic insulatorsSemiconductor process componentsStructural components requiring high strength and rigidity at elevated temperaturesDuratron® U1000 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your medical, pharmaceutical, or biotechnology applications or need a material suitable for electrical/electronic insulators and semiconductor process components, Duratron® U1000 PEI is the ideal solution.

Duratron® CU60 PBI, the ultimate engineering plastic for high-performance applications. This advanced material is made from Polybenzimidazole (PBI) and is the highest performing engineering plastic offered by Mitsubishi Chemical Advanced Materials. With superior mechanical properties, heat resistance, and mechanical property retention over 400°F / 205°C, Duratron® CU60 PBI is the ideal choice for applications where extreme temperatures and high loads are present.Features:Superior mechanical properties, heat resistance, and mechanical property retention over 400°F / 205°CBetter wear resistance and load carrying capabilities at extreme temperatures than any other reinforced or unreinforced advanced engineering plastic"Clean" in terms of ionic impurity and does not outgas (except water)Excellent ultrasonic transparency, making it an ideal choice for probe tip lenses in ultrasonic measuring equipmentExcellent thermal insulation, other plastics in melt do not stick to Duratron CU60 PBIBenefits:Duratron® CU60 PBI offers unmatched performance in high-heat applications, making it ideal for high heat bushings, connectors, valve seats, and probe tip lenses in semiconductor manufacturingIts superior wear resistance and load carrying capabilities make it a great choice for aerospace and other high-performance industriesIts "clean" characteristics make it ideal for use in vacuum chamber applications in semiconductor manufacturingIts excellent thermal insulation and non-stick properties make it ideal for contact seals and insulator bushings in plastic production and molding equipmentDuratron CU60 PBI is an ideal replacement for metals and ceramics in pump components, valve seats, bearings, rollers, and high-temperature insulatorsApplications:High-performance vacuum chamber applications in semiconductor manufacturingAerospace and other high-performance industriesHigh heat bushings, connectors, valve seats, and probe tip lensesContact seals and insulator bushings in plastic production and molding equipmentPump components, valve seats, bearings, rollers, and high-temperature insulatorsCritical components to decrease maintenance costs and to gain valuable production "uptime".

ELASTOSIL® R 750/50 OH is a high-consistency silicone rubber (HCR) known for its exceptional resistance to high temperatures, oxygen, and dry heat. The vulcanizates produced from this product exhibit excellent performance under extreme conditions. It is specifically designed for applications that require resistance to high temperatures and is suitable for extrusion processes.

ELASTOSIL® M 4370 A/B is a room-temperature-curing silicone rubber (RTV-2) that is pourable and utilizes addition-curing. It consists of two components and vulcanizes at room temperature. The main application of ELASTOSIL® M 4370 A/B is in creating silicone surfaces for printing rollers and making molds for casting low-melting metal alloys. This grade is compliant with FDA and BfR regulations for food contact applications.

ELASTOSIL® R 750/40 OH is a high-consistency silicone rubber (HCR) known for its exceptional resistance to high temperatures, oxygen, and dry heat. The vulcanizates produced from this product exhibit excellent performance under extreme conditions. It is specifically designed for applications that require resistance to high temperatures and is suitable for extrusion processes.

ELASTOSIL® R 750/60 OH is a high-consistency silicone rubber (HCR) known for its exceptional resistance to high temperatures, oxygen, and dry heat. The vulcanizates produced from this product exhibit excellent performance under extreme conditions. It is specifically designed for applications that require resistance to high temperatures and is suitable for extrusion processes.

SABIC's Specialties Business LNP COLORCOMP NX06514 is an unfilled Polycarbonate+ABS resin. Added feature of this material are: non-chlorinated, non-brominated flame retardant with UL V0 & 5VB flame rating, improved heat resistance, balanced flow and impact. This grade is an excellent candidate for a wide variety of applications including appliances, lighting and electrical. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.